Thanks! Tools I'm using, probably should've included this in the first post:
Dremel 200 series (with dremel press work station)
Xacto knives, A and B type, straight and curved blades
150 grit Sanding block
220 grit Sanding block
220 grit Sandpaper
Disposable nail files
Hot glue
Loctite super glue
Stainless steel ruler (I specify steel because its a great straight edge for cuts with an xacto knife)
Materials:
1" Styrofoam
1/2" Styrofoam
1/8" Balsa wood
1/16" Balsa wood
6mm craft foam
Plasti dip
High build primer
Various Spray paints
Acrylic sealer
1/8" clear acrylic sheet (ammo counter face)