k so before you read this update scroll up and look at the previous picture
of the guts of the helmet. i did a LOT of work cleaning up the inside. took out
all the clay, took out the plastic base i built off of, fiberglassed, etc. i am also
wanting to cut the facemask off so that the helmet and mask are two seperate
pieces, but i dont know which spot would be good to cut. im posting a picture
with 3 different color lines. itd help a lot if i could get some advice on which colored
line i should cut the mask, or if you have any other ideas itd help a lot
lots of work ahead!!! planning on finishing the sanding/bondo stage next -.- then i
eventually gotta put the helmet straps back on and the glass back in the eyes
(which are now all removed for a short period of time)
--Blink
ps. while i was fiberglassing it i somehow got a large drop of resin on my upper
lip and didnt know what it was o.o so i licked it off and it burned my tongue and gave
me a MONSTER stomach ache for like an hour.....never eat resin