My Journey to the Space Circlet

Ok, so here's an overview so far of where I am at and what I've got so far. Still need to print about 3 more pieces to finish. I think I'm making great progress so far though.
 

Attachments

  • 20221231_175535.jpg
    20221231_175535.jpg
    3.5 MB · Views: 68
  • 20221231_223635.jpg
    20221231_223635.jpg
    1.2 MB · Views: 63
  • 20221231_223644.jpg
    20221231_223644.jpg
    1.2 MB · Views: 65
  • 20221231_223649.jpg
    20221231_223649.jpg
    1.7 MB · Views: 72
  • 20221231_223636.jpg
    20221231_223636.jpg
    1.3 MB · Views: 62
  • 20221231_223631.jpg
    20221231_223631.jpg
    2.1 MB · Views: 74
  • 20221231_175642.jpg
    20221231_175642.jpg
    3.6 MB · Views: 71
Now for the magazine stock piece. The magaxine doesn't fit because of it's size and just how thick I printed it. Upon trying to fit the magazine in the well, I broke one of the sides off as can be seen from the UV cured glue holding it back on. Now I get to spend countless hours sanding everything to get that smooth fitness. Ugh
 

Attachments

  • 20230101_124650.jpg
    20230101_124650.jpg
    1.2 MB · Views: 72
  • 20230101_124647.jpg
    20230101_124647.jpg
    2.4 MB · Views: 64
  • 20230101_124639.jpg
    20230101_124639.jpg
    2.1 MB · Views: 59
  • 20230101_124643.jpg
    20230101_124643.jpg
    2.4 MB · Views: 59
  • 20230101_124635.jpg
    20230101_124635.jpg
    2.2 MB · Views: 64
  • 20230101_124633.jpg
    20230101_124633.jpg
    2.2 MB · Views: 65
Wanted to post some photos from ECCC2023. One of the photos is from the photoshoot we did at the convention center, and the rest of them are from the bountiful harvest of loot I managed to score while on the show floors.
 

Attachments

  • 20230305_123554.jpg
    20230305_123554.jpg
    1.6 MB · Views: 55
  • 20230305_123424.jpg
    20230305_123424.jpg
    1.6 MB · Views: 55
  • 20230305_123419.jpg
    20230305_123419.jpg
    1.6 MB · Views: 50
  • 20230305_123406.jpg
    20230305_123406.jpg
    1.4 MB · Views: 59
  • 20230305_123401.jpg
    20230305_123401.jpg
    1.3 MB · Views: 55
  • 20230305_123324.jpg
    20230305_123324.jpg
    982 KB · Views: 51
  • 20230305_123316.jpg
    20230305_123316.jpg
    1.1 MB · Views: 61
  • 20230305_123612.jpg
    20230305_123612.jpg
    1.8 MB · Views: 55
  • 20230305_123644.jpg
    20230305_123644.jpg
    1.6 MB · Views: 57
  • 20230305_123951.jpg
    20230305_123951.jpg
    2 MB · Views: 56
  • 20230304_114141.jpg
    20230304_114141.jpg
    1.5 MB · Views: 60
  • 20230305_123334.jpg
    20230305_123334.jpg
    1.1 MB · Views: 66
  • 20230305_123345.jpg
    20230305_123345.jpg
    2.2 MB · Views: 57
  • 20230305_123605.jpg
    20230305_123605.jpg
    3.6 MB · Views: 56
  • 20230305_123651.jpg
    20230305_123651.jpg
    3 MB · Views: 56
  • 20230305_124632.jpg
    20230305_124632.jpg
    3 MB · Views: 56
  • 20230305_124647.jpg
    20230305_124647.jpg
    1.8 MB · Views: 63
A small arsenal of weapons I had going to ECCC. I spray painted the smg from halo 3 myself. The red and white Ace of Spades hand guns are from destiny 2, as I couldn't pass them up once I saw them on the show floor. Anyone who's a fan of Destiny 2 should know of the significance of these weapons, and as a hunter main since the launch of d1, the story behind these are really important for me. RIP Cayde 6 .
 

Attachments

  • 20230222_095236.jpg
    20230222_095236.jpg
    2 MB · Views: 55
  • 20230222_094941.jpg
    20230222_094941.jpg
    2.1 MB · Views: 55
  • 20230216_163943.jpg
    20230216_163943.jpg
    1.7 MB · Views: 55
  • 20230303_112120.jpg
    20230303_112120.jpg
    3.7 MB · Views: 57
  • 20230303_112116.jpg
    20230303_112116.jpg
    3.8 MB · Views: 60
  • 20230303_112113.jpg
    20230303_112113.jpg
    3.4 MB · Views: 52
  • 20230303_112110.jpg
    20230303_112110.jpg
    4.2 MB · Views: 55
  • 20230303_112035.jpg
    20230303_112035.jpg
    3.8 MB · Views: 63
  • 20230303_112027.jpg
    20230303_112027.jpg
    3.5 MB · Views: 56
I began my next print, this being the sidekick from halo infinite. Unfortunately, this print failed halfway due to a clogged nozzle and it wound up in my box of failed prints and scrap plastics/supports. I wish I could repurpose or even reuse these but my state does not offer any form of plastic recycling and it's beyond unreasonable to buy a machine to grind and repurpose the plastic back into filament.
 

Attachments

  • 20230311_020634.jpg
    20230311_020634.jpg
    3.6 MB · Views: 55
  • 20230311_020610.jpg
    20230311_020610.jpg
    2.5 MB · Views: 55
  • 20230310_012154.jpg
    20230310_012154.jpg
    1.8 MB · Views: 53
  • 20230310_012152.jpg
    20230310_012152.jpg
    1.9 MB · Views: 47
  • 20230309_154419.jpg
    20230309_154419.jpg
    1.9 MB · Views: 54
  • 20230309_154417.jpg
    20230309_154417.jpg
    1.8 MB · Views: 50
  • 20230311_020216.jpg
    20230311_020216.jpg
    2.4 MB · Views: 53
Ok, so don't know about any of yous guys, but I am packed and ready for planetcon! Only a few more days until the event! Stay tuned for updates on that as well!
 

Attachments

  • 20230305_151820.jpg
    20230305_151820.jpg
    2 MB · Views: 57
  • 20230305_091642.jpg
    20230305_091642.jpg
    2.1 MB · Views: 67
  • 20230304_173929.jpg
    20230304_173929.jpg
    1.5 MB · Views: 52
  • 20230304_173002.jpg
    20230304_173002.jpg
    1.8 MB · Views: 55
  • 20230304_172956.jpg
    20230304_172956.jpg
    1.6 MB · Views: 54
  • 20230304_172640.jpg
    20230304_172640.jpg
    3.1 MB · Views: 54
Wanted to post some photos from ECCC2023. One of the photos is from the photoshoot we did at the convention center, and the rest of them are from the bountiful harvest of loot I managed to score while on the show floors.
I see you found the guy selling figures, nice score, excited to see your pics from planet con
 
Ok, so don't know about any of yous guys, but I am packed and ready for planetcon! Only a few more days until the event! Stay tuned for updates on that as well!
Wow you got that packed really tight. I have to use 2 storage totes and I still don't have enough space XD
 
Yes I did! Thanks so much for having tolde about him. At the same time, I hate you. I spent about $800 on figures . Totally joking though, I don't hate you. I am still awaiting that Xbox friend request btw .
I was tempted to spend more but I held back, pretty sure I sent it but ill re check.
 
So I don't have any before/after progress photos here, but I did replace the nozzle and loaded brand new filament into my printer. The filament I am using here works great for me, and I am able to print it very fast on my ender 3. After all that, I decided to restart printing my sidekick from halo infinite, and must say I am not disappointed. Lastly, I am already painting it to match.
 

Attachments

  • 20230314_031507.jpg
    20230314_031507.jpg
    1.8 MB · Views: 51
  • 20230314_031505.jpg
    20230314_031505.jpg
    1.8 MB · Views: 62
  • 20230314_020341.jpg
    20230314_020341.jpg
    1.3 MB · Views: 61
  • 20230314_020334.jpg
    20230314_020334.jpg
    2 MB · Views: 49
  • 20230313_160541.jpg
    20230313_160541.jpg
    2 MB · Views: 47
  • 20230313_160441.jpg
    20230313_160441.jpg
    1.8 MB · Views: 48
  • 20230313_160429.jpg
    20230313_160429.jpg
    1.9 MB · Views: 50
  • 20230313_160413.jpg
    20230313_160413.jpg
    825.6 KB · Views: 50
  • HINF_MK50_Crop.png
    HINF_MK50_Crop.png
    1.1 MB · Views: 55
Last edited:
For those of you going to PlanetCon, I have something special I'll be bringing along. I still need to finish painting and assembling it, but it I think it's gonna turn out pretty cool. It rhymes with smarbine
 
Some quick photos of c2e2 this year. This was my first time ever going to this event and I definitely plan to go again next year.
 

Attachments

  • IMG_2236.jpg
    IMG_2236.jpg
    1,001 KB · Views: 45
  • 20230401_114856.jpg
    20230401_114856.jpg
    866.9 KB · Views: 44
  • 20230401_114942.jpg
    20230401_114942.jpg
    874.4 KB · Views: 47
  • 20230401_105651.jpg
    20230401_105651.jpg
    858.5 KB · Views: 46
  • 20230401_105657.jpg
    20230401_105657.jpg
    897.8 KB · Views: 45
  • 20230331_183001.jpg
    20230331_183001.jpg
    1.8 MB · Views: 46
  • 20230331_181249.jpg
    20230331_181249.jpg
    3.1 MB · Views: 46
  • 20230331_180615.jpg
    20230331_180615.jpg
    3.4 MB · Views: 43
  • 20230331_180622.jpg
    20230331_180622.jpg
    1 MB · Views: 46
  • 20230331_174917.jpg
    20230331_174917.jpg
    1.3 MB · Views: 41
  • 20230331_175022.jpg
    20230331_175022.jpg
    1.7 MB · Views: 44
This thread is more than 11 months old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top