Pepakura Star Wars Armor And Helmets

[Nintendude]

Hi 405th Members,

I've been hard at work on all of this now for about 3 months in search of files for most of that time and pepping files the rest of the time. All of the file links have been files that were originally in 3D on the SciFi3D website. which after they were found I had to have them modified and taken off the human model for pep work to be done. The one exception is the Predator Link down below which the 2 pep files for the helmets which are in the rar belong to another modeller not sure who however I only found the files enlarged the helmets to a good size and put them into a rar. The links below are for these models. The ATST Driver Helmet, Chestplate and DL-44 rifle ; The Clonetrooper which I have finished everything but for the helmet and belt ; X-Wing Pilot Helmet, Chestbox and Leg Pack ; TIE Pilot Chestbox , I was planning on doing the helmet but I am still working on it since it is a very large file ; And finally there is the Snowtrooper which all of the hard armor parts have been completed including the helmet file. I will be opening a website soon for my files to go onto which will be www.paperstarwars.com until then the links are below.

http://www.4shared.com/file/117697385/36f8f348/XWing.html

http://www.4shared.com/file/117698650/ad94ab37/Snowtrooper.html

http://www.4shared.com/file/117701552/fa988a1c/Clone.html

http://www.4shared.com/file/117702393/371226da/AT_Driver.html

http://www.4shared.com/file/117703052/565a807c/TIE_Pilot.html

http://www.4shared.com/file/117941208/adff4672/Predator.html

 

[JunkyJuice]

sweet. please post again when you finish the whole clone trooper suit

 

[Maj Pain]

Very nice work splitting things up. I know a lot of people around here have been looking for a project like this. *tips hat*

 

[ACDCrockr209]

any chance you can convert them into .zip files??



I totally want the predator files for my bro.



-Pony

 

[stagefivedrift]

These are the files I broke down for Vagabond at the CTN forums. Are you Vagabond?

 

[Nintendude]

That would be correct I would be Vagabond as it is my other common username. Pony keep an eye on this as I will post the zip links soon for you.If you need something to extract the rar files with you could use WinRAR or WinZIP to extract them with it. JunkyJuice the belt file and the helmet file are a little too complicated for me to get them completed as you can tell by the chest however I am still in the process of finding other good 3D files with which to convert and make the outfit look good.

 

[Nintendude]

OK Pony, I will be putting up the zip files for everything later this evening so you might want to be on guard for that. Junky Juice I will be revising the Clone files and putting links up as well for armor with less folds and a 155 angle or whatever it's being called. Guys also later in the future I will be releasing The Sith Apprintice (not sure if I spelled that right) which the only armor I know that he wears is the shoulder and cloar armor and his lightsaber, but I should be releasing that set of files on here later this week for the SW fanatics.

Here are the zip files for those without the access to a rar file unzipper.

http://www.4shared.com/file/121035072/f6fdc593/AT_Driver_155.html

http://www.4shared.com/file/121035189/e7756ae3/Clone.html

http://www.4shared.com/file/121035281/ebe85c88/Clone_155.html

http://www.4shared.com/file/121035301/22f3bcb7/Predator_155.html

http://www.4shared.com/file/121035357/b6e7edc7/Snowtrooper_155.html

http://www.4shared.com/file/121035373/83bc4b5c/TIE_Pilot_155.html

http://www.4shared.com/file/121035384/9a40c230/X-Wing_Pilot_155.html

 

[bilsy28]

Nice Job Vagabond! I'm going to start the clone armor pronto. Thanks,man. By The Way, is the clone trooper helmet in the new links?

 

[Nintendude]

No unfortunatly I will not be adding a helmet file to this, Ben Aerens did an excellent job on his unfold of the helmet and it is on the Tamasoft Pepakura Gallery all you have to do is search for :helmet to find his files on there. As for the Clone files for the new people to this I would sincerly recommend using the 155 files but the 1st post Clone files are not on that link anymore they are in the above links since I made an accident with one of the files and the correct files are above.

 

[stagefivedrift]

Guys also later in the future I will be releasing The Sith Apprintice (not sure if I spelled that right) which the only armor I know that he wears is the shoulder and cloar armor and his lightsaber

Sweet. I'd like to see that one. Did you get your Pep Designer fixed?

 

[Nintendude]

Yes Juice I did get my pep designer fixed found out that the version I got from download.com was a bad version of the designer and I got a good version from the tamasoft site now I just gotta go get another password. Also Juice did you get the car file I sent to you if it's too big I have another model which is smaller in file size that I need a little help on if you want it instead of the one I sent to you. The only thing about the Apprentice stuff is I am doing both the armor and stuff from the first game and I am also doing his etra armor and helmet that he wears in the downloadable content they were talking about with Comic-Con that will be coming out in August I think but the person doing my 3D modelling for him, and god is he pricey but well worth it.

 

[stagefivedrift]

Yeah, I got the car. It was a pain to strip down, but I did it. My wife wants me to print it out Go-Kart size for her brother. That might be fun. Here's a pic of it. I'll PM you with the link.

 

[Kuki]

Guys also later in the future I will be releasing The Sith Apprentice (not sure if I spelled that right) which the only armor I know that he wears is the shoulder and cloar armor and his lightsaber, but I should be releasing that set of files on here later this week for the SW fanatics.

he also has a gauntlet which is slightly like boba fetts gauntlet with a blue neon light on the side.

 

[Greenghost]

Very nice work. Thanks these files are awesome. Hats off to you.

 

[Nintendude]

Thanks for letting me know that Kuki I'll let my modeller know about it, Greenghost thanks for the comments and Juice very nice work on the model now I just have to get my code again for my designer and I can do it in a day probably.

 

[bilsy28]

No unfortunatly I will not be adding a helmet file to this, Ben Aerens did an excellent job on his unfold of the helmet and it is on the Tamasoft Pepakura Gallery all you have to do is search for :helmet to find his files on there. As for the Clone files for the new people to this I would sincerly recommend using the 155 files but the 1st post Clone files are not on that link anymore they are in the above links since I made an accident with one of the files and the correct files are above.

I think "Ben Aerans" is Rundown, who's a person on this site.

 

[runningfox013]

Yeah, I got the car. It was a pain to strip down, but I did it. My wife wants me to print it out Go-Kart size for her brother. That might be fun. Here's a pic of it. I'll PM you with the link.

Excuse me nintendo dude those arn't your files. ANd you told the creator you wouldn't post those here. The creator of that car said you could only pepakura it and that was it. You said you wouldn't post it. The creator has tasked me through youtube with contacting you that you contact him.

 

[Appo 98]

Is there another way to get the files because the link is dead