As promised, here are the files. Big thanks to TnG for gathering them together, as well as the creators of these files without whom I would have approximately nothing to do with this project. Again I definitely recommend going through the thread that I linked above, as there is a lot of really good advice in there as well as an awesome ODST build. TnG R1ckx definitely deserves the recognition they're getting. Below is the files section from that thread.
Helmet, I ended up using only the helmet, not the vac buck which was included with this. The file names are reverse for some reason. I used default scaling
Visor, It's actually meant for pepakura but I've used it for printing. I wouldn't recommend this one unless you're backing it up with clay or something.
Shoulders, I scaled mine roughly 122%, but it's entirely dependent on your own persona. Take a good look at many reference pictures. It's a lot bigger than you might think and even the author printed it way too small.
Ab plate, (Smoothed) credits to Kirrou for the PDO and model file. Modified for 3D printing by me. The original is included in the 405th archive. (Legacy old unsmoothed file:
Ab plate)
Side ab plate, (
Whole) also credits to Kirrou for the PDO and model file. Modified for 3D printing by me. The original is included in the 405th archive. (Legacy old unsmoothed file:
Side ab plate)
Gauntlet (S
moothed) even more credits to Kirrou for the PDO and model file. Modified for 3D printing by me. The original is included in the 405th archive. Simply mirror both parts for the other arm. (Legacy old, unsmoothed files:
part 1,
part 2)
Chest (S
moothed) Credits to Hugh Holder for the PDO and model file. Modified for 3D printing by me. The original is included (together with other chest armor) in the 405th archive. I used the size between armpits for horizontal scaling. (Legacy old, unsmoothed files:
part 1,
part 2)
Hip plate (Smoothed) Since it's been so long, I forgot who to credit, sorry... My plates are exactly (from bottom to top) 20 centimeters and the scaling seems perfect for me. (Legacy old, unsmoothed files:
part 1,
part 2)
Rib plate I actually had to rip this model out of the game model and heavily modify it because I couldn't find good files. That's why it looks so odd. It's covered under your arms and sanding goes a long way, don't worry.
Chins, knee (Smoothed) Again forgot who to credit, sorry! Modified for 3D printing by me. (Legacy old files:
part 1,
part 2,
part 2.5)
Thighs, inner (
Smoothed) You guessed it, I forgot who to credit! Modified for 3D printing by me. I scaled this model too big, so watch out. (Legacy old, pre-cut parts:
part 1,
part 2,
part 3,
part 4,
part 5,
part 6,
part 7,
part 8)
Belt plate (S
moothed) Modified for 3D printing by me. The scaling is perfect for it right now. There fits a buckle nicely behind it.
Butt plate (S
moothed) Modified for 3D printing by me. The scaling is perfect. It's strong enough to sit on it if you print it solid enough.
COD plate (S
moothed) Modified for 3D printing by me. The scaling is perfect. You can put stickers behind it for fun little easter eggs.
Core (
Precut, in a RAR, 12 parts) I don't recommend printing this as it is.. I thickened it not so strongly, I smoothed it weirdly, I sliced it weirdly, and the scaling is all wrong. I might redo this someday. For now, it's the ugly little duckling of this collection.
M7s +
silencer (
two parts) The body is designed by Brain Westgate. Replace his nozzle with my silencer. The silencer is ripped from someone else's model and modified by me to be mostly smooth. I forgot who it's from, sorry.
Backpack V1 (
Made from the ground up, multiple parts that screw together with metric screws) My most requested file. The hinges don't fit that well so get out your heat gun, trooper! I'll fix that in V2. Unlike the other files which are modified, this one is made from scratch by me. The handlebars are an original design, since the official design is not that good for printing, and this looks cooler