Xtremenoob
Active Member
So after finishing my needler i have been wanting to do this for a while, I have been working on this for a few days and hopefully get them finished and make alot of latex gloves.
The first 2 pics are showing the placement of the armour parts that will be later embedded into the clay. The pics after that was from today's work molding and casting and just needs a run over with spot putty and a sand before i apply the primer. And the last pic is a test of the hex pattern as to see the scale of the hex on the side of the palm.
So here starts the build pics, enjoy the ride.
002
001
001
002
003
004
005
Until next time
Daniel
The first 2 pics are showing the placement of the armour parts that will be later embedded into the clay. The pics after that was from today's work molding and casting and just needs a run over with spot putty and a sand before i apply the primer. And the last pic is a test of the hex pattern as to see the scale of the hex on the side of the palm.
So here starts the build pics, enjoy the ride.
002
001
001
002
003
004
005
Until next time
Daniel
Attachments
-
16400602986_ff1801ef2f_z.jpg90.4 KB · Views: 1,074
-
16424820491_196f345eae_z.jpg92.3 KB · Views: 287
-
16424822781_e95107a730_z.jpg91.6 KB · Views: 232
-
16238944458_87edab6170_z.jpg105.5 KB · Views: 239
-
16426584925_3ff17abfe5_z.jpg106.1 KB · Views: 243
-
16240677227_b38de91163_z.jpg93.8 KB · Views: 237
-
16426571805_102de49bcc_z.jpg71.8 KB · Views: 256