Dead space 2 build- ds3 midnight release

Status
Not open for further replies.
EDIT: COSTUME STATUS=COMPLETE(or at least a good way finished
EDIT: HELMET & RIG photos on page 3!!!
EDIT: More photos on page 2 for progress!


HELLO AGAIN 405TH!!!!!
It's good to be back again! This time I come bearing the images taken from Midnight release of Dead Space 3!!!! The event was quite fun & The game is better than I could have possibly imagined! However there is a lot of personal ******** that's engulfing my life right now(Romance is a pain in the ass) & the fact I played Dead Space didn't help because I realize(SPOILERS) that my relationship to my ex is what Isaac's is in DS3 to Ellie. So anyway, without further adeu, here are the photos from tht wonderful event & the following day! ENJOY!!!!
So here is the front of the costume, missing two minor pieces, & Jesus, that front panel on the undersuit makes me look a lot heaftier than I actually am, I gotta work that out
Z8efqaf.jpg

The dynamic duo, Keef the chief & I
EswLXIx.jpg

Eeeeeeey Sexy laaaayday!
npnxyt9.jpg

MOTHER F****R!!!!
S31NdAl.jpg

by popular request, we did a bit of Gangnam style
nj4aOz4.jpg

here are a couple looks at the rig & the back of the costume, it still needs a bit of work on the undersuit, but it's pracrically there.
NF84Rfw.jpg

3Jis9KV.jpg

It's been a long long time since I've posted, I missed all of you guys on the forums lately & I feel really bad for not posting in so long, but unfortunately I've been swamped with work, school schedule has been getting hectic, I'm still working on trying to get Derelict out, & on top of that, six days of my work load these past couple of weeks have included an exhausting candlelight ceremony at Disneyland, for which I had to sing a multitude of Christmas songs that I now hate....

BUT THAT'S BESIDES THE POINT

So with DEAD SPACE 3 around the corner, there's been something I've been wanting to get off my chest, over a year ago, I began a project working on a Dead Space 2 Riot security suit, unfortunately my team didn't seem interested enough to actually help on building the costume, so with the overwhelming amount of work ahead of me, I just decided I'd F**kin' do it. Well that didn't work out so well when it came to sizing it to my body, so I stopped... But Dead Space three us around the corner, giving me reason not to give up hope on my build & start again, luckily: since I'd already been in-progress with the build I'll have some new stuff to flash! So that's enough talking from me, I'll let you guys get to dropping your jaws! See you around!

So here is the chest piece, It still needs fine details dremeled & the HUD attatched, but here it is!

PIjvI.jpg


jdDe5.jpg


The second thing I have is the RIG, I bought plastic tubing, Blue battery powered LED lights, & cut out the basic RIG shape

NTvpQ.jpg


The final thing I have to show is the unfinished shin piece, I have two of these done up, & all they really need is the second layer at the top glued on,

xYq7j.jpg


The other piece I have is one of the shoulder pads, I don't have a photo at this time, but that's because I seem to have misplaced it, I'll post it if I find it though, but for now, here you guys go, enjoy!
 
Last edited by a moderator:
Woo, More Dead Space suits! =D

I plan to wear mine during the release as well, and if there isn't a release, I'm still going in dressed up because why dafuq not!? Release is on my birthday too, so the excitement is just... mmph!

Keep the updates comin!
 
@Croc: I don't plan to, my dad's just done nothing about the printer & so I haven't been able to do anything about building my elite armor

@Statyk: I'm glad I'm not the only one going for this, between this & aliens colonial marines, February is going to leave me a broke mo-fo. So I'm excited I won't be alone in this fun adventure!

Ps. Croc: I have been to your model thread recently & I haven't seen anything on those, where do I find them?
 
HELLO AGAIN GUYS!!!! I have more to show, I did find a photo of my chest piece from earlier in the build & my shoulder piece, tonight I'll be working on popping out as many rough shapes as I can from the costume & then I'll post photos of my progress tomorrow afternoon, but for now, just look at the photo I have to show! Haha, see you guys soon!

Fxy9u6K.jpg
 
i think i have some of them unfolded on my usb....? they are ripped from reach, also trying to get some from halo 4
 
The Riot Security suit is my favourite! I wish you luck with finishing it :) It looks cool so far
 
Hey guys, just posting again with a little more progress, this time I've got some stuff for the leg armor cut out, what you'll see are the thigh guards, knee-pads, & shin guards. These are the newer pieces I've made(sans shin-guards) & they're very basic so far, but I hope they work, the thigh guards have proven quite awesome in design

0ej8ldx.jpg


ymFuPsA.jpg
 
Glad to see it's still going :D Hope you make it to the release with it! The seller of my LEDs sent me the wrong color, so I'm not going to have it done in time -___-; YOU GOT DIS.
 
Thank you, glad to see everyone as optimistic about this build as I am, & as for yours, pardon my french, but WHATAFUKK!!!! I Can't believe that! I was really really really looking forward to yours! You have to keep trying! XD it's bollocks they sent you the wrong color, but don't give up!!!
 
I'm still going to try and finish it, OF COURSE. =P I just won't have it in time for release D8

BUT BEFORE THIS STARTS TO LOOK LIKE MY THREAD, I WISH YOU LUCK! :D
 
Well, here's a little video I put together earlier to show the progress of the build as it was at the time, if you wanna watch it, go here!

 
Last edited by a moderator:
I apologize for triple posting, but I would really love some assistance, as it turns out, there are pep-files for this stuff, but unfortunately I can't access any links to 4shared models on the forums... It's really pissing me off: considering that I've a very brief period of time to work on the suit. If anybody can give me a link that isn't broken or can unfold pieces for me I'd appreciate it. all things considered, I found files for the helmet, only problem is that there are a lot of pieces missing. SO I'm stressing: to say the least
 
Hello, I'm wondering how you're going to see through a Dead Space 2 helmet. There's literally no visor. Or will you improvise and do something "creative"?
 
Hello, I'm wondering how you're going to see through a Dead Space 2 helmet. There's literally no visor. Or will you improvise and do something "creative"?

Well I took some precautions of looking at the size of the helmet, I'll be seeing out of the top slip most likely, if that doesn't Work out I'll be cutting a portion out if the helmet & adding a screen & proceed with painting, thank you for your interest. :)
 
Well guys! I'm proud to say that tonight was successful, worked up until 3AM(which is batshit crazy due solely to the fact I have to get up for school at 6:30 tomorrow) & got the majority of the Legs done, which was my goal for tonight! My buddy Keefer came over & finished his level 3 Helmet from DS1(which turned out smashingly, can't wait to pour some resin on that! XD but then we got down to business, scored all the leg pieces, forged some together, & got the majority done, cutting out two new pieces! So here are some photos from tonight!

Keef's Helmet!
XQwbOOM.jpg

me, wearing it & having too much fun
sfoKnqA.jpg

nEvoW7B.jpg


first set of scaled pieces, alongside the sing-braces we made
JwHBpBb.jpg

8Zsnfwm.jpg

& the final producet: the attatched calf-plate
C0pPRqs.jpg

nHV5G4p.jpg
 
I see what you did there! Nice job with the helmet! Now add some LED lighting if you have the budget to do so/when you have time. :)
 
Status
Not open for further replies.
Back
Top