Fallout 3 Terminator Wip.

Status
Not open for further replies.
Dr. KriSpY said:
The helmet is just breathtaking and in my opinion looks better than the video game version!



Thank you very much ^.^



Update:



Primer, bondo, sand, drill, shoulder, valve , tank, pep file, .Zip, 4Shared...



Picture908.jpg


Picture909.jpg


Picture910.jpg


Picture911.jpg


Picture912.jpg


Picture913.jpg


Picture914.jpg




Picture915.jpg


Picture916.jpg


Picture917.jpg


5830-2-1243244601.jpg


ValveWheel.png


http://www.4shared.com/file/259502852/40c55ec8/Valve_Wheel.html



And now, for my plan See,, So,, what I'm going to is, get some door hinges, then, I'ma gonna cut the chest in half, you follow? Good, then on the left side, it's going to be a permanent hinge, the right, will only have the top hinge have a pin in it, so yo'know, keep it closed. And for the tank.. going to get some,,, 4in pvc pipe stuff and then some hose.
 
Last edited by a moderator:
Thanks, you wouldn't of had the rest of it would you?



Scratch Build for the WIN!!



EDIT: took out some IMG tags.



Picture919.jpg


http://i31.photobucket.com/albums/c366/1h23/Props/Fallout3/Picture920.jpg[/IMG]

http://i31.photobucket.com/albums/c366/1h23/Props/Fallout3/Picture921.jpg[/IMG]

Picture922.jpg


Picture923.jpg


http://i31.photobucket.com/albums/c366/1h23/Props/Fallout3/Picture924.jpg[/IMG]

Picture926.jpg


Picture927.jpg


http://i31.photobucket.com/albums/c366/1h23/Props/Fallout3/Picture928.jpg[/IMG]

Picture929.jpg


http://i31.photobucket.com/albums/c366/1h23/Props/Fallout3/Picture930.jpg[/IMG]



BTW it's 3in pipe not 4in.
 
Iren00 said:
sadly no i havent been able to find the rest of the back pack unfortunitly, but i was able to find a decent pdo. of the left forearm for regular t45-d it was made with out the pipboy.

http://www.4shared.com/file/1bjU9BJ7/t45-d_left_forearm.html

ive have some pretty decent files for the t45 enough to make the whole suit minus the tanks so if u need something just ask and ill see wat i can do



Thanks for the unfold of that file, I have all of the pieces I need for the suit too but only half are unfolded lol.



Went back to the Depot earlier got some more stuff.

Picture931.jpg


Picture932.jpg




EDIT2: Took out IMG tags.



Edit: MOAR!

Picture933.jpg


http://i31.photobucket.com/albums/c366/1h23/Props/Fallout3/Picture934.jpg[/IMG]

http://i31.photobucket.com/albums/c366/1h23/Props/Fallout3/Picture937.jpg[/IMG]

http://i31.photobucket.com/albums/c366/1h23/Props/Fallout3/Picture938.jpg[/IMG]

http://i31.photobucket.com/albums/c366/1h23/Props/Fallout3/Picture939.jpg[/IMG]
 
Last edited by a moderator:
Roadwarrior said:
Thanks for the unfold of that file, I have all of the pieces I need for the suit too but only half are unfolded lol.



lol fair enough, no problem, it looking good man keep it up
 
Last edited by a moderator:
And keep it up I shall.



Edit: Took out some IMG tags.



Picture940.jpg


http://i31.photobucket.com/albums/c366/1h23/Props/Fallout3/Picture941.jpg[/IMG]

http://i31.photobucket.com/albums/c366/1h23/Props/Fallout3/Picture942.jpg[/IMG]

http://i31.photobucket.com/albums/c366/1h23/Props/Fallout3/Picture943.jpg[/IMG]



And remember:



BE HAPPY OR ELSE!
 
Iren00 said:
u better, or else...



Just a BTW it wasn't directed at just you, it was for everybody.



It's held on by tape.

Picture944.jpg


Picture945.jpg


Picture946.jpg




Great, now I have to the tint extra lens on the helmet gauge yellow.(Did you really think I scuffed up the actual gauge lens?)
 
Last edited by a moderator:
Iren00 said:
:( i know i just like to be included lol oh! where did u get the gauge from?



I made it.



First I cutout a round 3" diameter piece of card-bored, then I took this image off the internet:

th_Gauge.png



Made it into this:

th_PowerGauge.png



Re-sized it so it would fit, cut it out , then glued it the card-bored.



And then I got one of my craft foam sheets cut a strip of it, then put black electrical tape over it. After that hot glued that on , then I put small supports for the lens.



Also the needle is made from the foam.



I made the lens out of the clear plastic that comes with the toy's that you buy from wal-mart(etc..) have cut it out and put it in.



To get the scratches I just take the hot-glue gun, put a small-ish amount on spread it a bit with the nose and then take my thumb and put on the hot-glue. and then immediately take it off and that makes it opaque.



More pics!



Picture947.jpg


Picture948.jpg


Picture949.jpg
 
Last edited by a moderator:
Thanks :D



OK, so I decided that it would be cool to have a light in the power pack, here's what happened.



Mk 1, LED from an un working night light, a resistor from said light, a switch that at the time I didn't know that it was a dead man switch(You keep it pressed it's off let go it stays on), a 9v battery and uplink(Dunno what it's called..)

http://i31.photobucket.com/albums/c366/1h23/Props/Fallout3/Picture950.jpg[/IMG]





Edit: To save time loading the page I took out some IMG tags.

Flash forward.

Picture951.jpg


http://i31.photobucket.com/albums/c366/1h23/Props/Fallout3/Picture952.jpg[/IMG]

http://i31.photobucket.com/albums/c366/1h23/Props/Fallout3/Picture953.jpg[/IMG]

http://i31.photobucket.com/albums/c366/1h23/Props/Fallout3/Picture954.jpg[/IMG]

http://i31.photobucket.com/albums/c366/1h23/Props/Fallout3/Picture955.jpg[/IMG]





Mk 2, took out the bored from a push down light and that replaced the nightlight LED, kept the battery stuff.



Also it's about half power, I was holding it about 4" away from where it's being mounted.

Picture956.jpg


http://i31.photobucket.com/albums/c366/1h23/Props/Fallout3/Picture957.jpg[/IMG]

http://i31.photobucket.com/albums/c366/1h23/Props/Fallout3/Picture958.jpg[/IMG]



Overall time a few hour's, and a slight idea of what I was doing.
 
Iren00 said:
how much did u pay for ur led lights?



To be honest, nothing. Just found them and the other stuff lying about the house.

Well I did lose a non-working Nightlight and a working "Tap" light. But that's about all it cost me ;)



In other newz I will try too finish the construction of the chest piece by the end of the week.
 
Last edited by a moderator:
i think you made you custom backpack a little massive. as seen there its width overpasses the shoulder as in the game pic it shows it going in behind the shoulder and the upper pipe openings are kind big.



Nice improvisation though.
 
mjolnir follower said:
i think you made you custom backpack a little massive. as seen there its width overpasses the shoulder as in the game pic it shows it going in behind the shoulder and the upper pipe openings are kind big.



Nice improvisation though.



Oh shi...



EDIT: Just checked the pack and the shoulder don't collide. *Sigh* that's a relief.



Also the Cod:



http://www.4shared.com/file/2BSGbeT8/T45d_Cod-Groin.html



The main reason it's that big is because I thought the ingame one was too wimpy :p
 
Last edited by a moderator:
hey road you unfold all of your files correct? do you think u can do me a favor? im having a bit of trouble trying ti unfold this rifle pdo. and am wondering if you could give it a shot im still working on unfolding and mine so far are not that great. any help would be appreciated

here it is
 
Iren00 said:
hey road you unfold all of your files correct? do you think u can do me a favor? im having a bit of trouble trying ti unfold this rifle pdo. and am wondering if you could give it a shot im still working on unfolding and mine so far are not that great. any help would be appreciated

here it is



Just took a look at it, The trigger, and NONE of the side details are connected to the rest of the pep. The only part I would pep would be the main body of the rifle, the rest can be scratch built. So if you want I can edit the model so it's only the body and unfold that if you would like.



Also an: up the dat.



Ug shots.

http://i31.photobucket.com/albums/c366/1h23/Props/Fallout3/Picture962.jpg

http://i31.photobucket.com/albums/c366/1h23/Props/Fallout3/Picture963.jpg

http://i31.photobucket.com/albums/c366/1h23/Props/Fallout3/Picture960.jpg



Beut shots.

Picture965.jpg


Picture967.jpg


Picture964.jpg


Picture969.jpg
 
Last edited by a moderator:
Status
Not open for further replies.
Back
Top