First Halo Foam Build(Project ODS-Variant) Unit-010 PIC HEAVY!!

Status
Not open for further replies.

hyundai2806

Active Member
Hey everyone!!!! so good to be back on here
was really missing viewing everyone builds through here FB can be a little hectic sometimes.
Anyways, i started a new build right before RTX2014 of my concept Orbital Drop Spartan Variant
Now I have got to say this is STILL NOT completed, i was working on this 40 hours straight up to the morning of RTX14, through the 4 hour drive i had an AC adapter with the hot glue gun going and still strapping the uit together, AND THEN also another two hours in the parking garage outside the convention center still getting this together
hog1.jpg

I had NOT worn this prior to the first day of this event, and it was the FIRST time i debuted the entireconcept of this build
The Helmet(UNIT010) is not the helmet for this armor, it was a substitution that i had the luck of obtaining from Jim McCrea since i was short on time and could not finish an entire armor AND sculpt a complete original helmet, But along on the helmet is a custom COM piece i designed and made myself, there is one other helmet belonging to J.Stovall(UNIT011) out there, it is my personal custom paint scheme that ive already had multiple ppl asking to commission, i suppose it really hit home, this was a super rush i had pics from the foam bases and before and after sealing and whatnot, but im still in the proces of uploading most of everything i have to this new maptop so please bear with me

without further prolongation
I Give you
The ODS-V Orbital Drop Spartan Variant

UNIT 010 HELMET
received_m_mid_1394123637099_45c1fe0367d95bcc46_5.jpe
received_m_mid_1394123663070_8923b4e55736324895_0.jpe
received_m_mid_1394123637099_45c1fe0367d95bcc46_0.jpe
ODS-V UNIT 011 Helmet
FB_IMG_14027036669108884.jpg
10456360_10152094686546401_809664323_n.jpg
10446396_10152124172536401_1633233775_n.jpg
10474374_10152094672096401_321294768_n.jpg
10476409_10152094686551401_101523766_n.jpg

Full Concept Armor UNIT-010
Understand this will have another thread as this was only what i couldnt complete up to the parking lot of the event, it is porbly only 60% done All EA foam

photo54.jpg
ATT_1404561957647_photo2.jpg
ATT_1404561856022_photo1.jpg
20140620_215413.jpg
photo.jpg

Let me know what you guys think of my original armor designs
 

Attachments

  • hog1.jpg
    hog1.jpg
    54 KB · Views: 352
  • 10446396_10152124172536401_1633233775_n.jpg
    10446396_10152124172536401_1633233775_n.jpg
    52.1 KB · Views: 364
  • 10456360_10152094686546401_809664323_n.jpg
    10456360_10152094686546401_809664323_n.jpg
    60.9 KB · Views: 373
  • FB_IMG_14027036669108884.jpg
    FB_IMG_14027036669108884.jpg
    48.6 KB · Views: 346
  • received_m_mid_1394123637099_45c1fe0367d95bcc46_0.jpe
    received_m_mid_1394123637099_45c1fe0367d95bcc46_0.jpe
    52.9 KB · Views: 262
  • received_m_mid_1394123663070_8923b4e55736324895_0.jpe
    received_m_mid_1394123663070_8923b4e55736324895_0.jpe
    55 KB · Views: 265
  • received_m_mid_1394123637099_45c1fe0367d95bcc46_5.jpe
    received_m_mid_1394123637099_45c1fe0367d95bcc46_5.jpe
    53.2 KB · Views: 274
  • photo.jpg
    photo.jpg
    75.2 KB · Views: 354
  • 20140620_215413.jpg
    20140620_215413.jpg
    56 KB · Views: 404
  • ATT_1404561856022_photo1.jpg
    ATT_1404561856022_photo1.jpg
    74.7 KB · Views: 362
  • ATT_1404561957647_photo2.jpg
    ATT_1404561957647_photo2.jpg
    72.4 KB · Views: 348
  • photo54.jpg
    photo54.jpg
    51.2 KB · Views: 351
  • 10476409_10152094686551401_101523766_n.jpg
    10476409_10152094686551401_101523766_n.jpg
    54.5 KB · Views: 365
  • 10474374_10152094672096401_321294768_n.jpg
    10474374_10152094672096401_321294768_n.jpg
    59.3 KB · Views: 353
Here are the parts seperate while i was rushing through it, i snapped what i could but i was going so fast i didnt take pics of everything from stage to stage

ODS-V Parts

Shoulder Plates (without disposable shields)

20140704_023245.jpg
20140616_033856.jpg
20140615_171435.jpg

Shins
20140628_113325.jpg
20140628_113227.jpg
20140704_000728.jpg
20140703_014337.jpg
20140703_014308.jpg
20140703_014255.jpg
20140703_014238.jpg
20140630_095709.jpg

Knee Plates

20140703_014122.jpg
20140703_014104.jpg

Chest Rig/Torso
20140703_114138.jpg
20140704_000758.jpg

Belt/Cod piece
20140704_014150.jpg
20140704_014158.jpg
20140704_014228.jpg

Forearms
20140619_230618.jpg
20140620_215634.jpg

COM attachment
20140520_075739.jpg
20140519_203551.jpg
20140522_233607.jpg

Thighs
20140704_024427.jpg

Biceps
N/A for the moment i will have to take some shortly

Thank you for viewing i hope you guys like my foam work
 

Attachments

  • 20140704_023245.jpg
    20140704_023245.jpg
    53.8 KB · Views: 351
  • 20140703_014308.jpg
    20140703_014308.jpg
    45.3 KB · Views: 344
  • 20140703_014337.jpg
    20140703_014337.jpg
    48 KB · Views: 341
  • 20140704_000728.jpg
    20140704_000728.jpg
    50.8 KB · Views: 341
  • 20140628_113227.jpg
    20140628_113227.jpg
    54.3 KB · Views: 335
  • 20140628_113325.jpg
    20140628_113325.jpg
    62.7 KB · Views: 340
  • 20140616_033856.jpg
    20140616_033856.jpg
    55.9 KB · Views: 347
  • 20140703_014255.jpg
    20140703_014255.jpg
    52 KB · Views: 356
  • 20140615_171435.jpg
    20140615_171435.jpg
    60 KB · Views: 342
  • 20140703_014238.jpg
    20140703_014238.jpg
    44.5 KB · Views: 344
  • 20140630_095709.jpg
    20140630_095709.jpg
    48.6 KB · Views: 339
  • 20140703_014122.jpg
    20140703_014122.jpg
    47.4 KB · Views: 333
  • 20140703_014104.jpg
    20140703_014104.jpg
    53.4 KB · Views: 348
  • 20140703_114138.jpg
    20140703_114138.jpg
    57 KB · Views: 344
  • 20140704_000758.jpg
    20140704_000758.jpg
    51.5 KB · Views: 356
  • 20140704_014158.jpg
    20140704_014158.jpg
    47.4 KB · Views: 349
  • 20140704_014150.jpg
    20140704_014150.jpg
    38.2 KB · Views: 332
  • 20140704_024427.jpg
    20140704_024427.jpg
    47.6 KB · Views: 340
  • 20140704_014228.jpg
    20140704_014228.jpg
    38.1 KB · Views: 340
  • 20140619_230618.jpg
    20140619_230618.jpg
    39.4 KB · Views: 335
  • 20140620_215634.jpg
    20140620_215634.jpg
    55.5 KB · Views: 354
  • 20140520_075739.jpg
    20140520_075739.jpg
    262.5 KB · Views: 327
  • 20140519_203551.jpg
    20140519_203551.jpg
    53.1 KB · Views: 326
  • 20140522_233607.jpg
    20140522_233607.jpg
    59.4 KB · Views: 358
Holy mother of detail that foam work is great! I'm guessing you used a wood burning tool with a fine bit to get some of those detail lines?
 
That is one wicked helmet you have there.
I am really digging that top accessory.
The overall paint scheme is blowing my mind.
Very nice work so far...
 
new site issues not letting me edit last post,

wanted to say i'm digging the dead space-esk heads up display on the chest.
 
this is all just razor cut sir :) thank you for your kind words. no hot knife of engraving tool was used in this build
 
Is this based off of Halo 4 spartans or is completely aside from the games. I noticed some similarities in the forearm pieces to to some of the designs of the forearm pieces in Halo 4 which is why I ask.

Your build looks really amazing btw.

Is the helmet made from foam too?
 
You sir are a wonderful artist. The amount of detail on this is simply amazing, especially considering that you where making this in a time crunch. That you only consider it 60% done just blows my mind away. To most of us newer members we can only dream of having your skill. Thank you for showing us your work. I look forward to seeing what else you do. It is also making me want to try to do a foam build eventually.
 
i much appreciate it guys, i apologize for my lack of response time as im limited on where i can use wifi without being o a rushed time
this build is supposed to be a concept armor developed by MISRIAH armory, as they conducted manufacturing for alot of the spartan II program
it essentially a cross over to allow orbital entry for a single juggarnaut unit(this is a fictional unit btw) without the necessity of a drop pod as ODSTs use
this concept unit breaks through atmo on two disposable shield generators that are supposed to be located between the shoulder plates and upper shoulder area at the side of the neck
aso assisted by orbital strike plates that are no on this suit right now,, i didnt have time to add them
these units are a cross between the first series of the MK VI from halo wars and the concept or an orbital pod which is why there are similarities to the design, as i didnt want to completely stray away from the universe, there needed to be distinct factors that show, yes, he seems like a modified spartan unit or the original omega team variety
i didnt want to create an entirely alien unit to the halo universe

and no guys the helmet was a gift casted by a member from stony props, as i didnt ave time to sculpt the helmet for this, which i will still be doing, i needed something to fill it, this helmet fit the bill
 
Status
Not open for further replies.
Back
Top