- Member DIN
- S128
I've got to give hats off again to Asgardianhammer . It's people like you that remind me how lazy I am! How I go home after work and just play video games. You're a super active Division Identity Officer, active Regiment Commander, community organizer, scout leader, dad, employed, and you still have time to play video games! I hope you approve of the direction I took with your recruitment booth idea.
We've had the discussion here and on our regiment facebook group about what we want to see in a recruitment booth here in the Pacific. Now it's time to build it!
Drafting
To start off, I'd like to show you a transition of concept sketches.
![design3.jpg design3.jpg](https://405th-f28a.kxcdn.com/forums/data/attachments/256/256071-84fe012160af88738ad73af17090d6d8.jpg)
With the idea in mind now we needed exact measurements to create a cut list.
\
First I had to draw with real 3d effects! By drawing the actual thickness of wood I can see where joints need to be mitered, where dowels or screws or dados need to go, which board sits on which and how does it change the dimensions. I broke down each section and even started the beginning of a supply list on each page.
![rack.jpg rack.jpg](https://405th-f28a.kxcdn.com/forums/data/attachments/256/256075-c6077b9db2592bc0d11f2e9d08c0fdee.jpg)
(not to scale)
(to scale)
Since the bottom box is the cart that holds all the pieces (except the weapons rack which will hang on the outside). I had to write up all the thicknesses of the pieces used to make sure it fits in the box. Plenty of room to spare!
![thickness.jpg thickness.jpg](https://405th-f28a.kxcdn.com/forums/data/attachments/256/256083-dd057e8d9a91d3a7e47456575fc17e7e.jpg)
All in all this took me around 21 hours to doodle.
Cut List
From these dimensions I used MS Paint to lay out a cut list (only the 3/4" material for now).
mblackwell1002 is also doing a CAD drawing so we can cut these pieces on CNC.
(not to scale)
Materials List
*means still need to purchase
General Materials:
Computer Drafting mblackwell1002
(3) 4' x 8' x 3/4" Birch Plywood|$180
CNC work [Rogers HS]
(1) 4' x 4' x 1/4" Acrylic|$20 donated - Interstate Plastics
(2) 2" x 4" boards|$9
(3) 1/2" wood board scraps|$3
(1) 10" x 80t HiATB Saw Blade|$45
(1) 1/4" Downcut CNC Spiral|$30 [Rogers HS]
(1) 1/16" Roundover Routerbit|$20
(1) 45* x 3/4" Chamfer Routerbit|$25
(2) Grey Primers|$8
(2) Primary Paint|$9
(1) Secondary Spray Paints|$4
(1) Tertiary Spray Paint |$4
(1) PaintersTape|$8
(1) Wood glue|$5
*(1) Wood Putty
(3) Safety Glasses|$3
(5) Dust Masks|$2
Main Terminal:
(4) 5" Caster Wheels with locks|$35
(16) 5/16-18 x 1-1/4" bolts, nuts, washers $10
(1) 28" x 22" Insulation foam to cover inside base of box
(2) 1/4" x 36" Wood Dowel|$2
(34) 2hole L brackets|$30
(8) 1hole seam bracket|$4
(2) 6" x 3" x 1/16" sheet metal strips|$5
(3) 3/4" square hooks|$5
(2) modified 2x4 brackets $2
(1) Tablet|$60
(1) Keyboard|$30
(1) Mouse|$10
(2) Anti Theft Kits|$40
(2) Small Caribiners|$2
(2) 5/8" eyelet bolt|$2
*(1) Custom Aluminum Plaque mblackwell1002
(200) 3/4" deep screws for brackets| $10
(20) 1 1/2" wood screws (just in case)|$2
(1) Power strip|$11
*(1) Extension Chord|$5 used
*(1) UNSC Text Stencil
*(1) UNSC Logo Stencil
*(1) Build Your Character Sticker
*(1) Regiment logos Sticker
*(1) Monitor sticker
Table:
*(1) Custom Aluminum Frame|$?
(1) 16" x 36" Mirror|$8 used
*(1) 16" x 36" x 1/4" Acrylic-donated
(1) 16" x 36" Reflective Window tint|$10
(3) 3' Addressable LEDs|$23
(1) 9' of 1 1/2" x 1 1/2" board
*(1) Particle Photon
*(1) Logic Level Shifter
*(3) 10k Potentionmeter
*(3) Knobs
*(1) 2 and 3 pin terminals
*(1) 5v 10A power supply
(5) 5/16-18 x 1-1/2 bolts, nuts washers|$4
(1) 1-1/2" cabinet hinge|$2
(1) 5/16-18 x 3/4" bolt and nut|$1
*(1) Light-up A.I. Plaque [Kevin Hurd]
(5) Acrylic Business Card Holders|$5
(1) Acrylic Brochure Holder|$7
(1) Acrylic Half Page Holder|$7
(40) Earth Magnets|$10
*Business cards, brochures and booklets| $100
DIY (long stapler $16)
(100) Activity Books |$30
(500) Business Cards |$20
Weapon Rack:
*(1) Caution Stencil| $ [Kevin Hurd]
(3) 1" x 3" x 1/16" Sheet Metal|$5
(10) 1/4" x 2" Lag Bolts|$4
(4) 1/4" x 1 1/2" lag Bolts|$2
(1) 72" x 1 1/4" Wood Dowel|$8
(1) 72" x 3/4" Wood dowel|$5
(100) 11" zip ties|$2
(20) 24" zip ties|$2
Extras:
(1) Mannequin Stand|$100 PerniciousDuke
(1) Flag Pole $18 and Stand DIY PerniciousDuke
*(1) Custom 405th Flag Huntress217
(1) 20' Truck Strap|$6
(2) Eyelet bolts|$2
PerniciousDuke
(2) cloth covers $25 PerniciousDuke
Discounts:
Friend's Military discount @ Lowes
We've had the discussion here and on our regiment facebook group about what we want to see in a recruitment booth here in the Pacific. Now it's time to build it!
Drafting
To start off, I'd like to show you a transition of concept sketches.
![AsgardianBooth-page-001.jpg AsgardianBooth-page-001.jpg](https://405th-f28a.kxcdn.com/forums/data/attachments/256/256068-2dc050137b87c113947254cfffa94c45.jpg)
![Boothdraft1-page-001.jpg Boothdraft1-page-001.jpg](https://405th-f28a.kxcdn.com/forums/data/attachments/256/256069-6797173c28b3756c781b6cac73285a8f.jpg)
![blackwell.jpg blackwell.jpg](https://405th-f28a.kxcdn.com/forums/data/attachments/256/256070-9f82598904e5b61584a6c9f6c850c7a8.jpg)
![design3.jpg design3.jpg](https://405th-f28a.kxcdn.com/forums/data/attachments/256/256071-84fe012160af88738ad73af17090d6d8.jpg)
With the idea in mind now we needed exact measurements to create a cut list.
\
First I had to draw with real 3d effects! By drawing the actual thickness of wood I can see where joints need to be mitered, where dowels or screws or dados need to go, which board sits on which and how does it change the dimensions. I broke down each section and even started the beginning of a supply list on each page.
![box.jpg box.jpg](https://405th-f28a.kxcdn.com/forums/data/attachments/256/256072-5c94470c27ee65f2ecdb5531d880e9d9.jpg)
![monitor.jpg monitor.jpg](https://405th-f28a.kxcdn.com/forums/data/attachments/256/256074-da205c30d1e25d23da620c628890575f.jpg)
![cap.jpg cap.jpg](https://405th-f28a.kxcdn.com/forums/data/attachments/256/256073-25e5e276441f80556c7d7d5158a3ed49.jpg)
![rack.jpg rack.jpg](https://405th-f28a.kxcdn.com/forums/data/attachments/256/256075-c6077b9db2592bc0d11f2e9d08c0fdee.jpg)
![0487_0001-page-001.jpg 0487_0001-page-001.jpg](https://405th-f28a.kxcdn.com/forums/data/attachments/258/258049-031d2a8f73689f6a932c31349d7c5cc4.jpg)
![0485_0001-page-001.jpg 0485_0001-page-001.jpg](https://405th-f28a.kxcdn.com/forums/data/attachments/258/258048-35fcd4cf20d70e2420a3f6ae0016560c.jpg)
![front.jpg front.jpg](https://405th-f28a.kxcdn.com/forums/data/attachments/256/256080-b901dc5c13705c02a29d47cbfb459cc7.jpg)
![Leftside.jpg Leftside.jpg](https://405th-f28a.kxcdn.com/forums/data/attachments/256/256081-ed3a7f2943329e6788516cb6669e8f6e.jpg)
![rightside.jpg rightside.jpg](https://405th-f28a.kxcdn.com/forums/data/attachments/256/256082-c9726f0702292b2596b6a5a96bbc00e7.jpg)
Since the bottom box is the cart that holds all the pieces (except the weapons rack which will hang on the outside). I had to write up all the thicknesses of the pieces used to make sure it fits in the box. Plenty of room to spare!
![thickness.jpg thickness.jpg](https://405th-f28a.kxcdn.com/forums/data/attachments/256/256083-dd057e8d9a91d3a7e47456575fc17e7e.jpg)
All in all this took me around 21 hours to doodle.
Cut List
From these dimensions I used MS Paint to lay out a cut list (only the 3/4" material for now).
mblackwell1002 is also doing a CAD drawing so we can cut these pieces on CNC.
![3-4 cut list.jpg 3-4 cut list.jpg](https://405th-f28a.kxcdn.com/forums/data/attachments/308/308728-4552c51edfad7adbb393482553fe498f.jpg)
![1 misc cut list.jpg 1 misc cut list.jpg](https://405th-f28a.kxcdn.com/forums/data/attachments/258/258606-e024d517d1195dcc6d9f84895301ec98.jpg)
Materials List
*means still need to purchase
General Materials:
Computer Drafting mblackwell1002
(3) 4' x 8' x 3/4" Birch Plywood|$180
CNC work [Rogers HS]
(1) 4' x 4' x 1/4" Acrylic|$20 donated - Interstate Plastics
(2) 2" x 4" boards|$9
(3) 1/2" wood board scraps|$3
(1) 10" x 80t HiATB Saw Blade|$45
(1) 1/4" Downcut CNC Spiral|$30 [Rogers HS]
(1) 1/16" Roundover Routerbit|$20
(1) 45* x 3/4" Chamfer Routerbit|$25
(2) Grey Primers|$8
(2) Primary Paint|$9
(1) Secondary Spray Paints|$4
(1) Tertiary Spray Paint |$4
(1) PaintersTape|$8
(1) Wood glue|$5
*(1) Wood Putty
(3) Safety Glasses|$3
(5) Dust Masks|$2
Main Terminal:
(4) 5" Caster Wheels with locks|$35
(16) 5/16-18 x 1-1/4" bolts, nuts, washers $10
(1) 28" x 22" Insulation foam to cover inside base of box
(2) 1/4" x 36" Wood Dowel|$2
(34) 2hole L brackets|$30
(8) 1hole seam bracket|$4
(2) 6" x 3" x 1/16" sheet metal strips|$5
(3) 3/4" square hooks|$5
(2) modified 2x4 brackets $2
(1) Tablet|$60
(1) Keyboard|$30
(1) Mouse|$10
(2) Anti Theft Kits|$40
(2) Small Caribiners|$2
(2) 5/8" eyelet bolt|$2
*(1) Custom Aluminum Plaque mblackwell1002
(200) 3/4" deep screws for brackets| $10
(20) 1 1/2" wood screws (just in case)|$2
(1) Power strip|$11
*(1) Extension Chord|$5 used
*(1) UNSC Text Stencil
*(1) UNSC Logo Stencil
*(1) Build Your Character Sticker
*(1) Regiment logos Sticker
*(1) Monitor sticker
Table:
*(1) Custom Aluminum Frame|$?
(1) 16" x 36" Mirror|$8 used
*(1) 16" x 36" x 1/4" Acrylic-donated
(1) 16" x 36" Reflective Window tint|$10
(3) 3' Addressable LEDs|$23
(1) 9' of 1 1/2" x 1 1/2" board
*(1) Particle Photon
*(1) Logic Level Shifter
*(3) 10k Potentionmeter
*(3) Knobs
*(1) 2 and 3 pin terminals
*(1) 5v 10A power supply
(5) 5/16-18 x 1-1/2 bolts, nuts washers|$4
(1) 1-1/2" cabinet hinge|$2
(1) 5/16-18 x 3/4" bolt and nut|$1
*(1) Light-up A.I. Plaque [Kevin Hurd]
(5) Acrylic Business Card Holders|$5
(1) Acrylic Brochure Holder|$7
(1) Acrylic Half Page Holder|$7
(40) Earth Magnets|$10
*Business cards, brochures and booklets| $100
DIY (long stapler $16)
(100) Activity Books |$30
(500) Business Cards |$20
Weapon Rack:
*(1) Caution Stencil| $ [Kevin Hurd]
(3) 1" x 3" x 1/16" Sheet Metal|$5
(10) 1/4" x 2" Lag Bolts|$4
(4) 1/4" x 1 1/2" lag Bolts|$2
(1) 72" x 1 1/4" Wood Dowel|$8
(1) 72" x 3/4" Wood dowel|$5
(100) 11" zip ties|$2
(20) 24" zip ties|$2
Extras:
(1) Mannequin Stand|$100 PerniciousDuke
(1) Flag Pole $18 and Stand DIY PerniciousDuke
*(1) Custom 405th Flag Huntress217
(1) 20' Truck Strap|$6
(2) Eyelet bolts|$2
PerniciousDuke
(2) cloth covers $25 PerniciousDuke
Discounts:
Friend's Military discount @ Lowes
Last edited: