Rogue Halo 4 (Pep Files)

[Anarchy]

Looks good! If only I was as skilled with sketch up as you are.

 

[Arlock]

Update!!!

After a while I finally finished 3d design Rogue armor of Halo 4.

Now we just need to unfold in pepakura ... :cool

 

[Crimmson]

Update!!!

After a while I finally finished 3d design Rogue armor of Halo 4.

Now we just need to unfold in pepakura ... :cool

This is just too awesome. I wish some one from bungie or 343 would comment on the work we do here, especially yours.
Great job. I will build this as soon as the pdo's are available, eagerly waiting.

I don't know why this is in the noob forum, Mods ahem. I don't recall correctly, but that has never stopped me before, in order to get promoted to infantry man you need a certain amount of posts or provide something significant to the site , I believe this might warrant that if it is true, whose with me.

 

[NoMaybeYes]

Well this build jumped forward. Im glad someone is doing a Rouge helmet. There was two that were released but one is under defined by a lot and the second also a bit under too. Although I dont like Halo 4's armors (Mostly shoulders and torsos) this looks a lot better. I hope I can get onto it soon.

 

[Arlock]

Thanks guys, I really appreciate it.

ADD UPDATE!!

After a timeout. I already have the first file ready to download!
"Rogue H4 - Helmet"

The download is at the beginning of the post...

 

[NoMaybeYes]

Out of all the helmets that are in Halo 4 I dont like a lot of them. But this is one of the few I like. Thank you for doing a great job. I just have to print it out after I finish up two other helmets now.

 

[EVAkura]

Thank you very much for all of your hard work! Already printed and starting the cut out process! Soooo excited!

 

[T086]

Awesome job so far. Your work is top notch and has been a pleasure to use in my build. You really know your stuff!

 

[Arlock]

Out of all the helmets that are in Halo 4 I dont like a lot of them. But this is one of the few I like. Thank you for doing a great job. I just have to print it out after I finish up two other helmets now.

Thanks, I hope to see soon the construction of the hull ...

Thank you very much for all of your hard work! Already printed and starting the cut out process! Soooo excited!

How thoughtful! soon I'll upload the rest of the armor so you can build complete.

Awesome job so far. Your work is top notch and has been a pleasure to use in my build. You really know your stuff!

Thanks friend, with esfuerso and patience can create many things.
----

ADD UPDATE !

Second file of the Rogue ! Armor!
" Rogue H4 - Shoulders"

The file is zipped . contains two files PDO . the right and left shoulder. It also contains a small tutorial to arm correctly
The download is at the beginning of the post...

 

[Crimmson]

Thanks, I hope to see soon the construction of the hull ...



How thoughtful! soon I'll upload the rest of the armor so you can build complete.



Thanks friend, with esfuerso and patience can create many things.
----

ADD UPDATE !

Second file of the Rogue ! Armor!
" Rogue H4 - Shoulders"

The file is zipped . contains two files PDO . the right and left shoulder. It also contains a small tutorial to arm correctly
The download is at the beginning of the post...

thank you Aztlan for the great files, now I can start my build. I originally wanted recon but after seeing your rogue torso which I thought no would make, I will wait. I just got to some how find the time to build this.

 

[EVAkura]

This was my first pep build (helmet), and I did it with standard printer paper just so I could get the hang of it and not invest too much. What I learned was I do have the patience and am just masochistic enough to enjoy the fine details! I am going to do this again in nice heavy cardstock and am planning on a full rondo/fiberglass build with vacuum formed face shield. As the file came, it was sized perfectly for me. BUT, I can already tell just by the shape, it is going to have to be a two part helmet. That part I will tackle later... much later! When I get far enough with my build, I will start my own thread. I posted this part here because I want to pay homage to Aztlan again for this awesome pep file and all his hard work! Thank you again!

 

[ABYISZ]

Oh man oh man oh man, I can't wait to get started on the helmet! Thank you so much Aztlan

 

[Jester19]

Great looking work, Aztlan! It's almost enough to tempt me away from seeing my current project through to completion. I think I may put this in the queue for my next build! Thanks for all your hard work!

 

[Arlock]

thank you Aztlan for the great files, now I can start my build. I originally wanted recon but after seeing your rogue torso which I thought no would make, I will wait. I just got to some how find the time to build this.

Crimmson than good. I'm glad you'll encourage build the torso. i was busy these days, but I hope I can finish today, to upload the file.

This was my first pep build (helmet), and I did it with standard printer paper just so I could get the hang of it and not invest too much. What I learned was I do have the patience and am just masochistic enough to enjoy the fine details! I am going to do this again in nice heavy cardstock and am planning on a full rondo/fiberglass build with vacuum formed face shield. As the file came, it was sized perfectly for me. BUT, I can already tell just by the shape, it is going to have to be a two part helmet. That part I will tackle later... much later! When I get far enough with my build, I will start my own thread. I posted this part here because I want to pay homage to Aztlan again for this awesome pep file and all his hard work! Thank you again!

EVAkura Hello ! I've seen the construction of the hull and this increible.me like to watch other people enjoy building models .
It is an engaging project. and also a bit tricky. I wish you luck in construction.

Oh man oh man oh man, I can't wait to get started on the helmet! Thank you so much Aztlan

than good!!! ABYISZ hope to soon see the construction of the hull

Great looking work, Aztlan! It's almost enough to tempt me away from seeing my current project through to completion. I think I may put this in the queue for my next build! Thanks for all your hard work!

Thanks Jester-19. I think there will be quite a few rogue armor in the forum.

Sorry for my English, I speak Spanish, but I'm learning... XD

 

[philosoraptorr]

Im building your rogue shoulders too, I love them.
Yo puedo hablar un poco de espanol, aunque yo no hablo perfectamente.

 

[elusch99]

Your files are great!

Yo hablo español tambien, pero no es perfecto.

 

[Serin]

I've honestly not been a fan of the pep process or most resulting armour sets... Up til now!
It's probably the shiny colours(I'm easily entertained), but seriously, that's some amazing work

 

[Arlock]

Im building your rogue shoulders too, I love them.
Yo puedo hablar un poco de espanol, aunque yo no hablo perfectamente.

Your files are great!
Yo hablo español tambien, pero no es perfecto.

Gracias philosoraptorr y elusch99, es bueno saver que pueden entenderme un poco...
>> Philosoraptorr and elusch99 Thanks, it's good saver you might understand a bit ...

I've honestly not been a fan of the pep process or most resulting armour sets... Up til now!
It's probably the shiny colours(I'm easily entertained), but seriously, that's some amazing work

Thank you very much Serin. that good that you liked my work. but you'll be surprised when you see the following....

ADD UPDATE!!
Last file of Rogue Armor!!!!

The download is at the beginning of the post...

It was a slow job. but not difficult. I really liked the armor. I can probably build it, but that would be later.
Now I'll see what will be my next design project 3d

 

[NoMaybeYes]

Dat Torso. I love it!

 

[Crimmson]

Gracias philosoraptorr y elusch99, es bueno saver que pueden entenderme un poco...
>> Philosoraptorr and elusch99 Thanks, it's good saver you might understand a bit ...



Thank you very much Serin. that good that you liked my work. but you'll be surprised when you see the following....

ADD UPDATE!!
Last file of Rogue Armor!!!!

The download is at the beginning of the post...

It was a slow job. but not difficult. I really liked the armor. I can probably build it, but that would be later.
Now I'll see what will be my next design project 3d

Thank you very much Aztlan.