Spartan 1337

Spartan 98

New Member
So I'm doing a Spartan 1337 armour for fun
 

Attachments

  • PXL_20241010_214801434.RAW-01.COVER.jpg
    PXL_20241010_214801434.RAW-01.COVER.jpg
    2.4 MB · Views: 28
  • PXL_20241010_233457050.jpg
    PXL_20241010_233457050.jpg
    2 MB · Views: 27
  • 9c01bd63-81cb-4436-8710-5f5e232ccaf6.jpg
    9c01bd63-81cb-4436-8710-5f5e232ccaf6.jpg
    1.2 MB · Views: 21
  • PXL_20241010_235404133.jpg
    PXL_20241010_235404133.jpg
    1.6 MB · Views: 24
  • PXL_20241011_004734104.jpg
    PXL_20241011_004734104.jpg
    1.7 MB · Views: 27
  • PXL_20241011_004739969.jpg
    PXL_20241011_004739969.jpg
    2.3 MB · Views: 27
  • PXL_20241011_011449957.jpg
    PXL_20241011_011449957.jpg
    1.8 MB · Views: 22
My knowledge of foam is terrible so I'm only going to be doing 3D printers my goal is to do the majority of it as petg and then make some of the parts that move more often TPU
 
1000015454.jpg
 

Attachments

  • PXL_20241011_134924481.jpg
    PXL_20241011_134924481.jpg
    2.8 MB · Views: 18
  • PXL_20241011_140814914.jpg
    PXL_20241011_140814914.jpg
    3.1 MB · Views: 15
  • PXL_20241011_163656768.jpg
    PXL_20241011_163656768.jpg
    2.2 MB · Views: 13
  • PXL_20241011_181952715.jpg
    PXL_20241011_181952715.jpg
    1.9 MB · Views: 12
  • PXL_20241011_195958652.jpg
    PXL_20241011_195958652.jpg
    1.7 MB · Views: 13
  • PXL_20241011_233114988.jpg
    PXL_20241011_233114988.jpg
    1.5 MB · Views: 16

Your message may be considered spam for the following reasons:

If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top