1. 581-Erudite Watch
    Greetings Guest! I am the NEW guide of the 405th Infantry Division. I am 581. Surely, you are asking yourself, who is this fascinating entity and what is he about? Fear not! The staff of this great community has cleverly created a comic to share my backstory with you. Click HERE to learn more!

    Dismiss Notice

3D Printable Helmet and Armor Files

Discussion in 'Halo 3D Modeling' started by SI3RRA 117, Mar 12, 2017.

  1. SI3RRA 117

    SI3RRA 117

    So here are the first files Ive made 3D printable. These were obj H5 asset files posted by Chernobyl.i just cleaned them up a little. I have the Dead Eye helmet and the Teishin helmet up first. I'm new to modeling so these aren't UHD models or 100% game accurate. I did these helmets for my 2 boys and I think they will be quite happy with them. They do have some cutout for LEDs and will need to be scaled accordingly.

    dead capture2.JPG dead capture.JPG
    Deadeye Helmet file

    teishin screen shot.JPG
    Teishin Helmet file

    Additional files:
    H4 CIO Chest CIO Chest File
    H5 Warmaster helmet Warmaster h5.obj
    H5 Fotus Helmet H5 FOTUS.obj
    H5 Recruit/CIO forearm CIO forearm.obj
    H5 Wetwork helmet(courtesy of mblackwell1002) Wetwork
    H5 Fotus/Deadeye Chest Deadeye Chest
    Last edited: Mar 31, 2018
  2. DesperateOak48

    DesperateOak48 New Member

    They look great!
  3. SI3RRA 117

    SI3RRA 117

    Heres another - Halo 5 Warmaster Helmet - Once again credit to Chernobyl for the asset file.
    FYI I don't know why but all these seem to be very small and will need to be scaled up. I just work with the files as is then scale them up once I'm ready for sizing.
    I have not printed this yet but will be soon. Enjoy :)

    warmaster h5.JPG warmaster rear.JPG

    warmaster h5.obj
    Last edited: Jun 26, 2017
  4. mblackwell1002


    Cooool Beeaaaaanzzzzzz, bro.

    But seriously, that looks nice.
    Last edited: Jun 25, 2017
    SI3RRA 117 likes this.
  5. SI3RRA 117

    SI3RRA 117

    Thanks man. I'm excited to print this one. I think out of the 3 this cleaned up the nicest.
  6. sgtjasonshrout

    sgtjasonshrout New Member

    Oh gawd!!! Awesome!
    SI3RRA 117 likes this.
  7. BlueFire

    BlueFire New Member

    Awesome! I need to do some work smoothing models as well :D
    SI3RRA 117 likes this.
  8. Bucs37DK


    So clean, the models look great!
    SI3RRA 117 likes this.
  9. Austin3991


    These are beautiful!
    SI3RRA 117 likes this.
  10. Gunthar1895

    Gunthar1895 New Member

    Last edited: Oct 10, 2017
    GeneralMayhem likes this.
  11. SI3RRA 117

    SI3RRA 117

    Heres the H5 Fotus helmet if anyone is interested H5 FOTUS.obj . I tried rendering a screen shot but I couldn’t figure it out so this is some lame paint in 3d builder. Probably not real game accurate. I just kind made this one up as I went. I have not attempted to print this one so not sure how printer friendly it is. As always scale accordingly
    Last edited: Nov 5, 2017
    mblackwell1002 and oniwolf like this.
  12. mblackwell1002


    Nice, man! Looks good! I plan on printing this for reasons you already know. :D At least the sanding won't be super intricate!
    SI3RRA 117 likes this.
  13. Bucs37DK


    I finally got that tutorial you suggested regarding smoothing files complete. Works like a charm. My wife's armor is going to look epic hah. Thanks for the assist.
  14. SI3RRA 117

    SI3RRA 117

    Glad to hear it! What armor you working on? Would like to see it. Will you be sharing your files when completed?
  15. Bucs37DK


    Certainly will be. This will be a modified Reach armor. Expect the build log here soon hah.
    ReClaimer8015 and SI3RRA 117 like this.
  16. SI3RRA 117

    SI3RRA 117

    Awesome anxious to see it!!
    Bucs37DK likes this.
  17. SI3RRA 117

    SI3RRA 117

    Speaking of sharing files......here is another one. Title says helmet and armor files, but its been all helmets so far. So here is the H5 CIO/Recruit forearm. It may be in others armor sets as well. CIO forearm.obj
    CIO forearm.JPG
    Last edited: Jan 9, 2018
    mblackwell1002 likes this.
  18. mblackwell1002


    SI3RRA 117 likes this.
  19. SI3RRA 117

    SI3RRA 117

    Yes more then welcome!! And the wetwork is AMAZING but im sure you already knew that. Oh ya I had a brain cramp...... I meant to put recruit not recon so I fixed it :)
    mblackwell1002 likes this.
  20. DillonWalker

    DillonWalker New Member

    Cool stuff! Does anyone have a 3D printer file for the Military Police helmet? Reach or H5 is ok, since I cant find it anywhere. I have a Flashforge Finder and am looking to print out a small helmet just as a nice desk model!
  21. Jurassic


    Looks good! I'm going to take a closer look at the wetwork helmet and print it when my printer is running again!!
    mblackwell1002 and SI3RRA 117 like this.
  22. SI3RRA 117

    SI3RRA 117

    Sorry I have not seen anyone post a printable file for this helmet

    Jurassic I too will be printing the wetwork. A big thank you to mblackwell1002 for cleaning this model up, he did an amazing job with it.
    Last edited: Jan 16, 2018
    mblackwell1002 likes this.
  23. SI3RRA 117

    SI3RRA 117

    Heres a printable H5 Deadeye/ Fotus chest. I am currently in the process of printing this one myself. First piece is on the printer as I post this
    upload_2018-2-3_19-7-9.png 8BB3F394-1745-4D55-98FB-08BE15622D25.jpeg
    deadeye chest finished.stl
    Last edited: Feb 3, 2018
    mblackwell1002 likes this.
  24. Bucs37DK


    And so you have embarked on the great crusade of printing the chest armor. Looks great!
    SI3RRA 117 likes this.
  25. SI3RRA 117

    SI3RRA 117

    Yep this’ll be the matching chest for the second set with the deadeye helmet. So....if I get this printed I’ll have 2 armor sets at the half way piont (printed that is.....still have a lot of finishing ahead of me:eek:) But I think the lower halves will go much quicker (well.....I’m hoping anyway)
    First piece down
    Happy Printing :)
    mblackwell1002 likes this.

Share This Page