A1TD : Gears Of War 3. Re-opened.
- Thread starter Jakkrit
- Start date
- Status
NightWolf98
Jr Member
Thanks bigjohn, I will try that, very helpful.
bigjohn9397
Jr Member
Just to let you guys no, I will be compressing all the files I have released into a single folder due to an email I have received today from 4shared.com stating someone reported one of my files as "abusive" and said that if it happens again my account will be terminated. SO... I'll make it so it can be easier to dl...
[Update:]
So here is the .rar files with all the Gears pepakura I have gather/made from this site. Also note: it's not all Gears 3, there are some Gears 1/2 files in it too.
[Update:]
So here is the .rar files with all the Gears pepakura I have gather/made from this site. Also note: it's not all Gears 3, there are some Gears 1/2 files in it too.
NightWolf98
Jr Member
All right, so I just downloaded 3DS max as a student for 30 days. Will have a go at ripping shortly. Gaaramasa, do you have the other locust characters?
Update.
Great. 3DS max will take an hour to download. I'll go on oblivion then
By the way, bigjohn, what files of the characters do you have. I seem to be missing some, and can't find them. Thanks for the file also, found the Clayton belt. Again though, there is a cut down the centre. How do I fix this,or can I work around it?
Update.
Great. 3DS max will take an hour to download. I'll go on oblivion then
By the way, bigjohn, what files of the characters do you have. I seem to be missing some, and can't find them. Thanks for the file also, found the Clayton belt. Again though, there is a cut down the centre. How do I fix this,or can I work around it?
bigjohn9397
Jr Member
When unfolding the model you can make it so there isn't a cut down the center, you can make it a solid part.
Mini Fabio
New Member
Ahh, the link is dead... I want a Hammerburst so bady. Do you think you could possibly re-upload your work?
This is one my friend is working on thought you guys might like it. I know there are several ways of strengthening pepakura weapons but I was wondering if any of you guys had tried any and their results? Only ask because the torque bow I'm currently doing might've been a fail. I split it and fiberglassed the inside, but I got some warpage going on. I think the next one I will try the smooth cast plastic. Any advice and enjoy.
Mini Fabio
New Member
This is one my friend is working on thought you guys might like it. I know there are several ways of strengthening pepakura weapons but I was wondering if any of you guys had tried any and their results? Only ask because the torque bow I'm currently doing might've been a fail. I split it and fiberglassed the inside, but I got some warpage going on. I think the next one I will try the smooth cast plastic. Any advice and enjoy.
That looks awesome, dude! Well, with my Gnasher WIP, I left a hole in the barrel, and poured resin into it mixed with hardener (of course) and swished it around. It hardened the inside pretty well. If you can pour rondo into it instead, that would be much better.
Tell your friend good luck, and that I'm super jealous.
NightWolf98
Jr Member
I am almost done with Dom, but I have already uploaded the Marcus shoe covers (boots). Sorry for no updates in a while, have had a lot of homework to do, and was ill over the weekend.
A bit of a stupid question, but I've looked and only found full armour scaling. I'd like to make a helmet for myself, but I'm not sure how to scale it. I'm making a Carmine helmet for my fiancee, and it's quite large.
Also, I've looked through all the pages, and am looking for Anya's boots? Thank you very much!
Also, I've looked through all the pages, and am looking for Anya's boots? Thank you very much!
Anon ONI agent
Member
I just founded a wiki to put all the files in, found at http://gearsofwarpepakura.wikia.com/wiki/Pepakura_Database
ThomasHarris
New Member
Which CAD tool did you use to create this 3D designs? I am using a Auto CAD for creating this designs but I am not getting such perfection while creating the designs.
This is one my friend is working on thought you guys might like it. I know there are several ways of strengthening pepakura weapons but I was wondering if any of you guys had tried any and their results? Only ask because the torque bow I'm currently doing might've been a fail. I split it and fiberglassed the inside, but I got some warpage going on. I think the next one I will try the smooth cast plastic. Any advice and enjoy.
Can you post a link to the file he used? I have been looking for a unfold of the Hammerburst
Now this is what I'm talking about! Let's all post links to this page as well, so that we can have a clear understanding of What has and has not been worked on, and what is or is not unfolded!
I say post here 1st then archive there! Sound good?
Here are some files I have uploaded
Boltok Revolver - http://www.4shared.com/file/nwsZVaw_/Boltok_Revolver.html
Boomshot Grenade Launcher - http://www.4shared.com/file/nNXnsOm4/Boomshot_Grenade_Launcher.html
Gnasher Shotgun - http://www.4shared.com/file/KCQMy2Iz/Gnasher_Shotgun.html
Lancer - http://www.4shared.com/file/wRKgV0A_/Ultimate_Lancer_11_scale.html
Long Shot Sniper rifle - http://www.4shared.com/file/swVprh9N/Long_Shot_Sniper_rifle.html
Sawed-Off Shotgun - http://www.4shared.com/file/lBMD3Kqb/Sawed-Off_Shotgun.html
Torque bow - http://www.4shared.com/file/ALeitmB4/Torque_bow.html
Anon ONI agent
Member
Lovin' the files guys, but a lot of them, like the Boomshot, Boltok, and Gnasher in the post above, have faces that intersect, making them nigh-impossible to pep. Can someone fix this? Especially with the Gnasher since I need that file
Also, a GoW1 Hammerburst Assault Rifle would be AWESOME, since it's my second favorite gun in the series, next to the Lancer.
BTW, thanks for the contributions to the wiki, 3080!
Also, a GoW1 Hammerburst Assault Rifle would be AWESOME, since it's my second favorite gun in the series, next to the Lancer.
BTW, thanks for the contributions to the wiki, 3080!
- Status
