File it under Crimmson

[BiGHARYSCOTSMiN]

52 pages and growing... dayum Crim!

 

[RavenH8rt]

Yip thats him I got a obj file of the armor but its not very detailed and still needs unfolding (I hate being a noob) currently busy pepping his mask

 

[Crimmson]

52 pages and growing... dayum Crim!

I know right.

Yip thats him I got a obj file of the armor but its not very detailed and still needs unfolding (I hate being a noob) currently busy pepping his mask

hope to see it finished. post a pic here if you want.

h4 recon edited, remodeled, unfolded-Crimmson

measurement


the highlighted areas are not needed, but I like it.


remember to take into account the, maybe, 1/4 inch gap in between the front plate and back plate that I left to make it easier to unfold.
the scale is h-440, w-350, d-406 and scale is 20.10, 212 point to point measurement in pep equal roughly 8 inches deep plus the 1/4 inch to 1/2 gap,37 pages. I really don't know why I picked those numbers as I dont have much experience unfolding. if you do edit the unfold remember that I enclosed the armor on the inside adding extra pages to the unfold, if you want move the flaps to the extra pieces away from the regular armor pieces in case you don't want to use them. doing this will also subtract from the total pages by probably 4 or 5 pages(see above pic).
remember to give yourself credit if you edit the unfold and please re upload it, don't hoard it.
link
http://www.mediafire.com/download/58ad38mkd5dq9ul/h4_recon_chest_remodel_and_unfold-Crimmson.pdo

can some one look this over and see if it is good to go, I don't do much unfolding so.... yeah. enjoy.

copyright Microsoft, 343 non profit use only

 

[NoMaybeYes]

can some one look this over and see if it is good to go, I don't do much unfolding so.... yeah. enjoy.

I can look it over in a few hours and get back to you. It does looks fairly organized and well done though.

 

[RavenH8rt]

Will do so I just finished pepping the eye I am taking my time want to make it look excellent and excellent work with the above piece of armor if you ever have time I think you will do deathstroke justice I know you have a lot of requests just hoping one day that you will model it

 

[RavenH8rt]

About a third with the mask I have no finger tips left haha but will upload some pics of the whole pep build got a nice file from EyeofSauron on the rpf biiiiiiig thanks to him

 

[NoMaybeYes]

can some one look this over and see if it is good to go, I don't do much unfolding so.... yeah. enjoy.

This is a Very good unfold Crimmson. Everything is organised so you dont have everything scattered. The only thing you could have done was decrease the Threshold to about 160 or 165. Doing so takes care of all the unneeded folding lines. If you're curious about what I mean look in Settings-->Other Settings --> and its the very bottom option. Rhinoc gave me some tips back when the Halo 4 asset pack came out and its helped a lot. Post #25 is where he talks about it and some others in my unfolding stuff if you want to look further into it.

 

[Crimmson]

About a third with the mask I have no finger tips left haha but will upload some pics of the whole pep build got a nice file from EyeofSauron on the rpf biiiiiiig thanks to him

yeah my fingers hurt a lot from cutting as well.

This is a Very good unfold Crimmson. Everything is organised so you dont have everything scattered. The only thing you could have done was decrease the Threshold to about 160 or 165. Doing so takes care of all the unneeded folding lines. If you're curious about what I mean look in Settings-->Other Settings --> and its the very bottom option. Rhinoc gave me some tips back when the Halo 4 asset pack came out and its helped a lot. Post #25 is where he talks about it and some others in my unfolding stuff if you want to look further into it.

thank you.

maybe I should have put this up before, but this is what I am aiming for, for my build of course. I plan on unfolding everything before I start building to make sure I have the files I want,plus you guys benefit from this as well.

protector helmet- edited and unfolded
recon chest- edited and unfolded
venator shoulders- edited and unfolded
twin plated arms- edited and unfolded
xg89 narrow butt plate-edited and unfolded
xg89 narrow thigh plate- edited and unfolded
xg89 narrow shin plates- edited and unfolded
xg89 narrow boot- edited and unfolded
and I have no time line to follow. tell what you guys and gals think of this set up.


here is the protector helmet. edited, mesh welded, but I kept the skill level low as I plan to details with the foamies. hhhmmmm foamies. (I don't know why this sounds like something you eat and enjoy)

link
http://www.mediafire.com/download/5pqj4z8frqwx57l/H4_PROTECTOR_HELMET.pdo

recon chest

link
http://www.mediafire.com/download/58...d-Crimmson.pdo

venator shoulder, same as above, edited mesh welded, but I kept the skill level low, etc

link
http://www.mediafire.com/download/62zo9r6rr4mah95/H4_VENATOR_SHOULDER.pdo
also can some one look these over to make sure the unfolds are good to go. thanks

copyright Microsoft, 343. non profit only

 

[Crimmson]

alright here is the twin plated arm, edited minus some parts I felt were unneeded.



http://www.mediafire.com/download/t6jc22sf0ppdq2d/H4_TWIN_PLATED_ARMS.pdo

copyright Microsoft, 343, non profit only.

 

[Crimmson]

here is the xg89 butt plate, thigh and boot. you guys know the deal. I will work on the shins later. also I plan on leaving the shin in the four major parts, apart, build them and then use an elastic band to attach them together.


link
http://www.mediafire.com/download/noihravujv3bn03/H4_XG89_NARROW_thigh.pdo


link
http://www.mediafire.com/download/b7exxbs7n55c4qa/H4_XG89_NARROW_boot.pdo


link
http://www.mediafire.com/download/fnacuqacc91pi2f/H4_XG89_NARROW_butt_plate.pdo

please check them out for me guys thanks.

copyright Microsoft, 343, nonprofit only

 

[Crimmson]

xg89 narrow shin plates


link
http://www.mediafire.com/download/571942seuerrt26/H4_XG89_NARROW_shin.pdo
and now to procrastinate, print stuff out, procrastinate some more, motivate myself to build it, procrastinate, slowly build it. yeah that sounds about right.

copyright Microsoft, 343, non profit

 

[Chernobyl]

This may be a little bit of an ask, but... would I be able to leverage some help with the H4 Mk VI multiplayer armour files?

 

[Crimmson]

This may be a little bit of an ask, but... would I be able to leverage some help with the H4 Mk VI multiplayer armour files?

how can I help you with the mk vi?


ok so I keep changing my mind on the some of the armor, well the forearms any ways. reason being that the armor is already in multiple pieces, hence it would be easier to slip on. of course with the help of elastic to strap it together.

link
http://www.mediafire.com/download/61b2l1lfjllt62x/h4_contoured_arm.pdo
copyright Microsoft, 343 non profit only.

edit: had to upload new file as the old had overlapping issues, did not update the pic though

 

[Chernobyl]

how can I help you with the mk vi?

More in the way of helping me with the torso than anything - I'm trying to prep the files for my eventual H4 build and I'm going to be using Mk VI for most of it.

 

[Crimmson]

More in the way of helping me with the torso than anything - I'm trying to prep the files for my eventual H4 build and I'm going to be using Mk VI for most of it.

how do you want the h4 mk 6 torso: one solid piece, two pieces(front plate, back plate with 'boosters' mesh welded) or three pieces(front plate, back plate, booster packs) that worked out weird.
numerically.

 

[Chernobyl]

I'd ask for three pieces, if it's not too much to ask for - I want to be able to remove and mod these pieces, and I have the feeling that a three-piece set will be easier in the long run.

 

[tac2002]

any lock on a pep file for the h4 mark 6 gauntlet??

 

[Crimmson]

any lock on a pep file for the h4 mark 6 gauntlet??

I have not started on them yet. I have only started on the mk6 g2 chest and that might take abit as my work load is pretty hectic at the moment. 16 hr days minimum, doesnt leave much room for much

 

[foxleader]

okay everyone give the man some room he needs time and it's not a lot he's got right now.

 

[tac2002]

I have not started on them yet. I have only started on the mk6 g2 chest and that might take abit as my work load is pretty hectic at the moment. 16 hr days minimum, doesnt leave much room for much

no worries cimmson just thought id ask...never hurts to ask and sorry to bother, but lets just say you do awesome work and i hope you get a chance to take a breather keep up the awesome work!:cool