Free 3D Model Index

Finally got around to updating my tacpad. fixed some of the details where the green lights go and changed the screw size. I updated my thingiverse page for it so the link at the front of this thread will still take you to the new one.
tacpadv2.PNG

tacpadv2_back.PNG
 
I blame you and your gorgeous files for this one :lol:
Added zinc rods for support, magnetized middle section to break down into a suitcase and made a bit of room for a battery and arduino. Gorgeous files here thank you for posting them! I did notice that there were minimal/no tolerances on the parts that fit together so I had to do a decent bit of sanding on that end, a small price to pay.

View attachment 321793
Finished!!! Picture dump incoming....
20220815_095319.jpg
20220815_095325.jpg
20220815_095334.jpg
20220815_095340.jpg
I used neodymium magnets to make the floaty bits movable.
20220815_095434.jpg
20220815_095438.jpg
20220815_095444.jpg
20220815_095453.jpg
Halo 4 Version
20220815_100152.jpg
20220815_100158.jpg
20220815_100202.jpg
Halo 5 Version
20220815_100300.jpg
20220815_100307.jpg
20220815_100312.jpg
 
James wanted a TAC/MAT model, I had a free hour or so... here we are!
File has not been tested for printing yet, please let me know if any issues are encountered while printing. Comes with communicator, hard-shell upper and lower.
As always this is a non commercial file, personal use only! (CC-BY-NC)

Enjoy!

Screenshot 2022-08-26 231546.png
image (5).jpg
image (6).jpg
 

Attachments

  • TACMAT 2519.zip
    280.2 KB · Views: 202
James wanted a TAC/MAT model, I had a free hour or so... here we are!
File has not been tested for printing yet, please let me know if any issues are encountered while printing. Comes with communicator, hard-shell upper and lower.
As always this is a non commercial file, personal use only! (CC-BY-NC)

Enjoy!

View attachment 322249View attachment 322247View attachment 322251
You are the absolute best. I'll be printing this very soon, so I'll let you know how it goes
 
I made the Lehto 20th anniversary MkV Helmet for 3D printing. It's about 6 .4mm walls thick at a .2 layer height. The odd geometry is removed from being solidified in Blender. The zip has 3 files with the visor that I haven't sized down for a vacuum form buck.

I should add that this is currently sized to fit my head with it just barely being able to touch my ears.

1665020551406.png
20221005_224524.jpg
 

Attachments

  • Lehto MkV Helmet .zip
    807.1 KB · Views: 213
Last edited:
Hey guys! I finally finished my ZO'KLADA-pattern Plasma Pistol from Halo 5! This one is muuuuuch better than my previous entry and I'm quite happy with how it turned out!
20230108_080757.jpg
20230108_080915.jpg

Feel free to download it on my Thingiverse and give it a try!

 

Attachments

  • 20230108_080920.jpg
    20230108_080920.jpg
    1 MB · Views: 94
  • 20230108_080926.jpg
    20230108_080926.jpg
    911.9 KB · Views: 88
  • 20230108_080820.jpg
    20230108_080820.jpg
    1.3 MB · Views: 86
  • 20230108_080804.jpg
    20230108_080804.jpg
    964.2 KB · Views: 90
Last edited:
Hey guys! I finally finished my ZO'KLADA-pattern Plasma Pistol! This one is muuuuuch better than my previous entry and I'm quite happy with how it turned out!
View attachment 326735View attachment 326738
Feel free to download it on my Thingiverse and give it a try!

Thank you so much
 
I've got yet another model for you guys!
The M90 Mk.2 Shotgun from Halo 2! This model uses a 3/4"pvc pipe for the barrel and it has a functional pump. You can download it on my Thingiverse:


20230118_194858.jpg
20230118_194850.jpg
20230118_194842.jpg
 
I am not so into Infinite, but i saw that TacticalClippy yesterday and i thought i should make one, i think it´s the worst design ever i made in Fusion360, but you can edit it if you want, f3d and step files are included.
I also don´t know the exact size of those weapon charms, so scale might be off in the stl file.

----------------------------------------

UPDATE 01.02.23
Reworked design, smoother edges, better look.

----------------------------------------

Dropbox Link: TacticalClippy.zip
Thingiverse: HALO Infinite Weapon Charm - TacticalClippy by ManAtArmsProps
Cults3D: HALO Infinite Weapon Charm - TacticalClippy

Clippy_new.jpg
 
Last edited:
I am not so into Infinite, but i saw that TacticalClippy yesterday and i thought i should make one, i think it´s the worst design ever i made in Fusion360, but you can edit it if you want, f3d and step files are included.
I also don´t know the exact size of those weapon charms, so scale might be off in the stl file.

Dropbox Link: TacticalClippy.zip
dude these are a perfect con giveaway item!
 
Hey guys, it's me again! I finished up with another model for ya'll! This time, it's the Forerunner Boltshot from Halo 4 and Halo 5!
Screenshot (191).png
Screenshot (192).png
Screenshot (193).png
Screenshot (189).png
Screenshot (190).png


Download it at:


Happy Printing!!!
 
You thought I was done... WRONG! Here's another one for ya :)

The ROHAKADU-pattern Plasma Pistol from Halo Infinite!!! I completely reworked my previous model, so this one should be super easy to paint and asemble. the top also flips open just like my Halo 5 version!
Screenshot (194).png
Screenshot (195).png
Screenshot (196).png
Screenshot (197).png
Screenshot (198).png


Download it at:


Let me know if there are any issues!
 
You thought I was done... WRONG! Here's another one for ya :)

The ROHAKADU-pattern Plasma Pistol from Halo Infinite!!! I completely reworked my previous model, so this one should be super easy to paint and asemble. the top also flips open just like my Halo 5 version!View attachment 327480View attachment 327481View attachment 327482View attachment 327483View attachment 327484

Download it at:


Let me know if there are any issues!
i cant wait to build this one it looks very well thought out great job
 
my partner and I have been busy making Satchmo III's SPI pep files printable, here's what we've gotten done so far
spi gauntlet.jpg
spi bicep.jpg
spi boot.jpg
 

Attachments

  • Halo onyx bicep SPI-TC (Satchmo III) 2018-07-04.obj
    43 KB · Views: 138
  • Halo onyx foot-plates SPI-TC (Satchmo III) 2018-07-04.obj
    22.2 KB · Views: 117
  • Halo_onyx_forearm.obj
    61.9 KB · Views: 125

Your message may be considered spam for the following reasons:

If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top