Halo Infinite GEN III Master Chief MK VI/ VII

Status
Not open for further replies.
Good grief! You must be a fustion 360 machine! Are you planning on selling your files or making then available in the future?
 
First suit up with Master Chief’s leg armor. Super happy with how this turned out, fits a lot better than I expected and managed to pull off the look I’ve been working for!
114BD6AD-5968-4CCF-9F74-4B77CA57ED6F.jpeg
D9DF6DCA-2187-45FF-8BF5-4DE1ED9EF117.jpeg
CB299ED3-B8B0-422F-9A7F-AD4F2E70EACD.jpeg
65FD229C-6D3E-401B-AA1A-BD7D17CA06AC.jpeg



Mobility is also great! Movement should be much better when I get everything strapped up.
2A09F13F-3B61-4685-B7AB-08659B37D37B.png
 
Holy crap that looks good!!!!
 
Dang that looks awesome! How much additional height do you gain with those boots?
 
First suit up with Master Chief’s leg armor. Super happy with how this turned out, fits a lot better than I expected and managed to pull off the look I’ve been working for! View attachment 306473View attachment 306472View attachment 306471View attachment 306474


Mobility is also great! Movement should be much better when I get everything strapped up.
View attachment 306476
Very jealous of the mobility, Im currently trying to figure out the best way to get more mobility in my armor short of stretching my legs out 3 inches. Looks really good tho!
 
Mark VII belt is complete! Finally nearing the completion of this suit!
F78A2B10-65E9-4806-9BA7-BDE8D0F3F0F9.png
998D6F79-1BC0-4161-B073-973C8C59F385.png
71AF8728-3DF1-4560-BE8B-715BF7E37A28.png
F6BAE3AD-D5D4-41D8-814F-D4BDF1990931.png



I’m really happy how this project turned out. I’ve only picked up on 3D modeling last October and now my first 3D modeled suit is one armor piece away from completion (won’t be modeling the helmet). I very much look forward to finishing this along side my Master Chief armor, Halo Infinite really has driven me to learn a new and valuable skill.
0E18C175-68CF-40E5-91F3-4215AD20D071.png
 
Back again with another update!

0E3D29CD-CDC6-4610-BBB7-18BE3BE4884C.png
570768ED-7C01-478D-ACE9-AFED328A7C39.png

Finished modeling Master Chief’s COD piece. This one was a pain to make, all the awkward organic pieces made it difficult to blend it with the non organic shapes. But pretty happy about how it turned out in the end.
17EB3551-E563-47D2-9D01-835129C80159.jpeg

I’ve also made some changes of my own on the COD piece however the changes I’ve made are very subtle. The main groin piece is smaller and squarer/ boxier and also gave it a more “T” shape to emphasize a robotic appearance, this was inspired from the become trailer and gundam design. Furthermore, I’ve also implemented my own subtle design changes throughout the armor that I will discuss in a future post when I finish the suit.
FF30CE53-1C66-414C-B91A-FFEBEE901195.jpeg


Finally, Ive also finished printing the left arm of the suit. Scaling the arms was a bit tricky since 1cm in height resulted in a huge increase in width for the forearm and bicep pieces. Overall, the arms look amazing and feel amazing to wear. The movement isn’t bad at all and I can definitely have more range when I complete the undersuit.
55302080-E41A-4259-B89C-E7BBCADABBC8.jpeg
5336430B-7EF4-4111-8811-8DD4B50FBD64.png
8F820FDB-FF72-4B0A-804E-CFC9DDF0B85A.jpeg

49D2F94B-3666-4B04-AED0-022A9C4227E1.jpeg

661013AE-6632-448F-8024-04484C938A04.jpeg
72D27718-E05E-4A5E-A8E3-36C9155879F1.jpeg



So here’s a little insight when scaling. Depending on the armor’s shape and proportion, sometimes increasing the height by a small amount can create a huge difference. The small forearms piece you see here is 28cm tall while the bigger one is 30cm tall. The height difference is only 2cm however when relative to the wearer the smaller forearm is for someone with a 6’0” frame while the bigger one is for someone who is 6’8.
3686C329-D655-429D-8866-431CA709B18A.jpeg


Hope you guys enjoy this post, I’m finally making progress on the upper body. Next up will be the torso!
 

Attachments

  • CBB79FB6-AC70-4E6D-B58B-EFAF0C9A89FF.png
    CBB79FB6-AC70-4E6D-B58B-EFAF0C9A89FF.png
    8.6 MB · Views: 108
Status
Not open for further replies.
Back
Top