Halo Reach Thigh Piece


FHMENDOZA

New Member
Hello all,
I've finally made it to building the thigh piece, the problem i have is that the template doesn't print to the size that is should be, is there a way to print it where I can just tape the pieces together to make template to scale?
 

SquishyShoes

Well-Known Member
G'day mate, how are ya?

I'm not really understanding what you mean?
Are the patterns on the paper printing out wrong? Perhaps the pepakura file you have is set for A4 instead of letter or vice versa.
Or do you mean the scaling of the assembled piece is wrong?

Perhaps a picture of what is wrong would help?

LOVE & JETT,
Squish
 

FHMENDOZA

New Member
G'day mate, how are ya?

I'm not really understanding what you mean?
Are the patterns on the paper printing out wrong? Perhaps the pepakura file you have is set for A4 instead of letter or vice versa.
Or do you mean the scaling of the assembled piece is wrong?

Perhaps a picture of what is wrong would help?

LOVE & JETT,
Squish

It's printing out to the scale of the paper not the actual size it's suppose to be.
 

Sean Anwalt

Sr Member
Member DIN
S530
When printing, be sure to check your printer settings. Do not adjust scale or anything. If you get the "part of the patterns aren't in the printable area" message, tell it not to adjust, but make sure your patterns are all contained as best as possible within the dotted lines.
 

FHMENDOZA

New Member
When printing, be sure to check your printer settings. Do not adjust scale or anything. If you get the "part of the patterns aren't in the printable area" message, tell it not to adjust, but make sure your patterns are all contained as best as possible within the dotted lines.
When I print out the template it just prints out all on one piece of regular sized printer paper. the height of the thigh piece is 12 inches but when it prints out its only like 8 or 9
 

xXDashIVXx

Sr Member
Where did you get the file from? Is it a pepakura file or a png? You could always try and splice it up in word or another program, but that would be too much work for something so simple. It's weird it's not working how it should sk we will get this figured out!
 
This thread is more than 2 years old.

Your message may be considered spam for the following reasons:

  1. Your new thread title is very short, and likely is unhelpful.
  2. Your reply is very short and likely does not add anything to the thread.
  3. Your reply is very long and likely does not add anything to the thread.
  4. It is very likely that it does not need any further discussion and thus bumping it serves no purpose.
  5. Your message is mostly quotes or spoilers.
  6. Your reply has occurred very quickly after a previous reply and likely does not add anything to the thread.
  7. This thread is locked.
Top