Hey guys hopefully someone can help me out.
Currently I'm in the process of building a set of ODST armor
I got to the stage where I used rondo to harden the inside of my armor but 3 days later the rondo still has not set all the way. If you press on it, it will leave a finger print that will disappear about an hour later and the armor does not have a hardened quality to it.
I used epoxy resin which has worked on the rest of the armor exterior curing fully within 8 hours and bondo which also has cured fully on its own. I mixed the epoxy resin parts A and B together for 5 minutes and mixed the bondo and cream hardener together for 2 minutes in separate containers. I then mixed them together in a 1 part resin 2 part bondo mixture and mixed again for 3 minutes and poured/ brushed the rondo over the armor.
Any ideas on how to either make the rondo cure at this stage, or what I did wrong in the process that caused the rondo not to cure?
Here is the bondo I used:
Here is the resin I used:
Here is how the rondo appears on the ODST shoulder pauldron
Currently I'm in the process of building a set of ODST armor
I got to the stage where I used rondo to harden the inside of my armor but 3 days later the rondo still has not set all the way. If you press on it, it will leave a finger print that will disappear about an hour later and the armor does not have a hardened quality to it.
I used epoxy resin which has worked on the rest of the armor exterior curing fully within 8 hours and bondo which also has cured fully on its own. I mixed the epoxy resin parts A and B together for 5 minutes and mixed the bondo and cream hardener together for 2 minutes in separate containers. I then mixed them together in a 1 part resin 2 part bondo mixture and mixed again for 3 minutes and poured/ brushed the rondo over the armor.
Any ideas on how to either make the rondo cure at this stage, or what I did wrong in the process that caused the rondo not to cure?
Here is the bondo I used:
Here is the resin I used:
Here is how the rondo appears on the ODST shoulder pauldron