Little oopsie with my chest piece

[Capt caboose895]

So I’m 3d printing my armor for cosplay and ran into a problem my chest piece is a little big for my body any suggestions on how to fix it

 

[Capt caboose895]

Also my first build

 

[cyne]

It'd be easier to help you if we all knew what steps you've taken to get here, such as how you scaled your pieces, if you've got accurate measurements, etc.

Also, we don't discuss airsoft on the forums due to liability and safety of our members

The 405th and Paintball/Airsoft

New recruits: Please note that we do not discuss using our costumes for use while playing Paintball/Airsoft or in place or in addition to protective gear for any sport. Our costumes are purely for fun and for no protective purposes whatsoever and therefore we are not qualified to provide...

www.405th.com

 

[SgtSaint]

Aww man... cyne beat me to it

my chest piece is a little big for my body

You'll want to get Armorsmith to make a proper avatar then you can scale the armor to that. Or have someone with it build you an avatar and do your scaling.

My "New Armorer FAQ" thread:
SgtSaint's FAQ post
<spoiler> I commonly recommend
1 - starting with a less unforgiving build as your first armor, then work up to one's like this with tighter and tighter tolerances after you've leveled up your scaling skills.
2 - Start at the feet and work up, helmet last after you've gained skills at scaling and printing.</spoiler>

My 1st Spartan build (Not awesome)
First {Halo} build - Spartan (TV series)

My 2nd Spartan build
Build 2 - MK-VI gen-3. With some silver timeline influence

My 3rd Spartan build (just realized I need to finish this with more details)
MK-VI Silver team season 2 [2024 build]

My ODST Build

SgtSaint ODST build (AU regiment)

 

[SgtSaint]

Ladies and gentlemen... What we have here is a person of taste and refinement. Exhibit No. 1:

 

[Capt caboose895]

Aww man... cyne beat me to it
View attachment 372511


You'll want to get Armorsmith to make a proper avatar then you can scale the armor to that. Or have someone with it build you an avatar and do your scaling.
View attachment 372512


My "New Armorer FAQ" thread:
SgtSaint's FAQ post
<spoiler> I commonly recommend
1 - starting with a less unforgiving build as your first armor, then work up to one's like this with tighter and tighter tolerances after you've leveled up your scaling skills.
2 - Start at the feet and work up, helmet last after you've gained skills at scaling and printing.</spoiler>

My 1st Spartan build (Not awesome)
First {Halo} build - Spartan (TV series)

My 2nd Spartan build
Build 2 - MK-VI gen-3. With some silver timeline influence

My 3rd Spartan build (just realized I need to finish this with more details)
MK-VI Silver team season 2 [2024 build]

My ODST Build

SgtSaint ODST build (AU regiment)

Ok the problem is though the width is perfect but the length is to big and if I size it down at all it will be to small

 

[Capt caboose895]

Ok the problem is though the width is perfect but the length is to big and if I size it down at all it will be to small

Also I can’t buy armor smith and nobody I know has it

 

[SgtSaint]

Also I can’t buy armor smith

Why not? Is it blocked in your country or something? Or are you on a Macintosh instead of Windows?

and nobody I know has it

You can pay to have someone do it

https://www.etsy.com/listing/1847746841/digital-avatar-creation-service-cosplay

Ok the problem is though the width is perfect but the length is to big and if I size it down at all it will be to small

You need to learn how to size disproportionately (X = 100, Y =86, Z = 92). Its how every part of my armor is: Legs shorter but thicker... helmet wider but same depth... forearms more "Popeye at the muscle" and normal at the wrist... etc. etc.
as well as do custom distorting. I'm big in the chest/ribs and always have to do a parallelogram type distortion for my ribs (see ODST below).

This is a big reason why in my FAQ that I push doing a less exacting armor first and work up to more technical suits that require greater scaling skills and tools. Basically "If you're going to (re)print 3 suits anyway, you might as well have 3 you can wear instead of 1 you can wear and 2 that are piles of waste on the shop floor."

 

[CaminusPrime]

Plenty of people have armoursmith but still can’t scale properly.

Theres is other free alternatives that can help to assemble something in 3D space and grab measurements. It’s a bit harder to get now but I still prefer windows 3D builder as a free alternative.

Ultimately it’s a learning curve but many software packages even slicer can have point to point measurement tools which go a lot better than armoursmith in my opinion, just compare spacing of openings on the model and reference your body. Try to keep armour proportional as a whole while allowing them to fit individually, it’s a balance you have to get with some trial and error.