Looking for recommendations on foam Noble Six

[AngelicnobleSix]

I have yet to get materials except a couple roles of eva foam and a couple fabrics. I want to make a couple additions the games don’t have like functioning cortana ai chip (functioning meaning i can put said chip prop in the slot) on the back of the Mk V and left hand/wrist cybernetic/prosthetic. Couple lights foam undersuit,possibly custom boots with my own design and some additional lights on boots/shins and shoulder pads. I have no printer or vaccum former,i would like to make this as inexpensive as i can. Like the boots/shins will be a darker grey/black. With some light going up on both sides if possible.

I wanted to know what you guys recommend for files materials and tools like vacuum former paper printer for patterns etc i am open to more additions,as long as my budget isn’t exceeded. There’s a couple props i will get too like the cortana tube to carry on my back etc

 

[KaeSpoon]

Welcome Six, glad to have you!

Please check our armory and the tutorial section, we have plenty of guides and free files!
Here is a foam FAQ thread by Fallen and RandomRanger to get you started: Foam Guide
And here is another thread about visors by the wonderful N8tebb: Dying and Chroming Visors (Cheap) TUTORIAL

We will be here to help out every step of the way, and I can't wait to see how your build turns out!

Kind regards,
Kae

 

[Randomname52]

Welcome!

I can say that for most of the foam work I’ve done, I’ve used the cheapest paper printer I can find, nothing fancy needed really. Making sure to print on cardstock so your patterns have some stiffness to trace!

Hope this helps in any way, and can’t wait to see your progress!

 

[AngelicnobleSix]

Welcome Six, glad to have you!

Please check our armory and the tutorial section, we have plenty of guides and free files!
Here is a foam FAQ thread by Fallen and RandomRanger to get you started: Foam Guide
And here is another thread about visors by the wonderful N8tebb: Dying and Chroming Visors (Cheap) TUTORIAL

We will be here to help out every step of the way, and I can't wait to see how your build turns out!

Kind regards,
Kae

 

[AngelicnobleSix]

Also do you know how i could add an ai chip slot to the mark V B helm? I am looking into adding a modified hearing system that plays music or something,(connects to my phone or something

 

[Arcane]

Also do you know how i could add an ai chip slot to the mark V B helm? I am looking into adding a modified hearing system that plays music or something,(connects to my phone or something,tacpad on wrist will probably be a phone case or something that could run doom as a joke. If not it will be a prop attachment

since the chip is just basically a rectangle you might be able to just cut a slot into your helmet, although I think the length of the chip might make your helmet bulky depending on the scale. The hearing aid tutorial in the index uses headphones that let you plug in a cable for music

 

[N8TEBB]

I'd also recommend checking out other foam noble 6 builds. You'll be able to get some tips and inspiration from other people's threads. One of the most notable foam noble 6 builds on the forum is KitKatGoose 's reach build. Find it here:

Detailed Reach armor + Undersuit

Hey everyone! This will be where I post progress and details of my new Reach suit. I've created two Reach suits in the past, one for myself and one for a friend. Hopefully this one will be even better looking and better functioning. This suit will be pretty much all foam, made with pep patterns...

www.405th.com

 

[AngelicnobleSix]

I'd also recommend checking out other foam noble 6 builds. You'll be able to get some tips and inspiration from other people's threads. One of the most notable foam noble 6 builds on the forum is KitKatGoose 's reach build. Find it here:

Detailed Reach armor + Undersuit

Hey everyone! This will be where I post progress and details of my new Reach suit. I've created two Reach suits in the past, one for myself and one for a friend. Hopefully this one will be even better looking and better functioning. This suit will be pretty much all foam, made with pep patterns...

www.405th.com

I have it saved,she was the person who directed me to this site,I’ve been chatting with her about it a bit for advice on this
I just have some questions about how to get the ai chip and chip slot to fit in the helmet etc because i may have to hybrid the build there by 3d printing a slot and chip while also making sure they are the same size. With the use of this site and thingiverse or etsy,this should go well

 

[Worainu]

Also do you know how i could add an ai chip slot to the mark V B helm? I am looking into adding a modified hearing system that plays music or something,(connects to my phone or something

If you are 3d printing the helmet its not very hard to modify the helmet to have or premade holes in programs like blender or cad.
One of my posts is a guide on how to do this in blender using booleans. Tutorial: Lets cut some precise 3d holes (demystifying blender) Its way more convenient to modify this stuff pre print. So having a plan and accurate measures is a great start. If its eva cutting a hole is as simple as finding a Dremel (though I would practice making the hole the way you want it on scraps). You could make a jig as well to help cut consistent lines. As far as the visors are concerned I recommend buying a resin or premade visor personally from a creator (The pricetag is well worth the lack of headache lol)
Edit: if you don't wanna mess with editing the helmet files I don't mind modifying it for ya.