Dan99
New Member
Hi everyone, Daniel here.
Though I would start my first build thread today. Ive built two suits in the past, a halo 4 chief and a desert ODST, both out of EVA. Wanted to try something different over summer and thought I would 3d print a mark VI suit. Big thank you to Moe for all the files. This would not be possible without his hard work and generosity. Stay tuned for updates!
Equipment List
-Anycubic Chiron FDM printer
-FLSUN QQ-S Delta Printer
-Various PLA and ABS Fillaments (1.75mm)
-Tons of sandpaper
-Primer/filler
-Neodymium magnets
-50mm Blower fans
-LEDS
-2 Gold Mirrored Visors (Amazon)
-Motorcycle Protective gear (Amazon)
-Airbrush and assorted acrylic paints
-Acetone
-Much more ill add when I remember it
--EDIT--
After build completion I ended up using lot more materials than I thought! Below is the remainder of things I used
-CR10s Pro v2 3d printer
-DIY vac form machine
-PETG sheets
-IDYE Poly, orange
-Alclad chrome II or Spazstix chrome
-10mm LEDs
-Wireless LED receiver and remote
-12V Battery
(I also created a mold for helmet casting but this is not required or recommended)
Though I would start my first build thread today. Ive built two suits in the past, a halo 4 chief and a desert ODST, both out of EVA. Wanted to try something different over summer and thought I would 3d print a mark VI suit. Big thank you to Moe for all the files. This would not be possible without his hard work and generosity. Stay tuned for updates!
Equipment List
-Anycubic Chiron FDM printer
-FLSUN QQ-S Delta Printer
-Various PLA and ABS Fillaments (1.75mm)
-Tons of sandpaper
-Primer/filler
-Neodymium magnets
-50mm Blower fans
-LEDS
-2 Gold Mirrored Visors (Amazon)
-Motorcycle Protective gear (Amazon)
-Airbrush and assorted acrylic paints
-Acetone
-Much more ill add when I remember it
--EDIT--
After build completion I ended up using lot more materials than I thought! Below is the remainder of things I used
-CR10s Pro v2 3d printer
-DIY vac form machine
-PETG sheets
-IDYE Poly, orange
-Alclad chrome II or Spazstix chrome
-10mm LEDs
-Wireless LED receiver and remote
-12V Battery
(I also created a mold for helmet casting but this is not required or recommended)
Last edited: