spartady196
New Member
Hi everybody, i am still new in this forum, i have a very big project in head which is gonna take a long time for sure and will surely cost some money.
to start i will tell what i can do about crafting, i have been a lot with Racing helmet painting airbrushing, Motorcycle Bodyworks, i used to work a lot on 3DS max 2010 but i didn't touch it for almost 3 years!!
so i think i will need to find out some tutorials for that.
So i will explain my Project a little bit more so that you guys can understand.
First, i was thinking about making a full ODST complete armor and print it all in a 3D printer.
I would like you guys to give me a tip on what material i should use Carbonfiber, Titanium, fiberglass? etc...
( I would like to use it in a paintball fight *making some funny video )
the visor? i was thinking about using my HJC RPHA 10 helmet blue visor since i find that type of helmet visor have a really Halo Visor style and is very strong and flexible.
For the helmet inside i would use some foams from my Old HJC which won't be too fit and to lose So that i can breath easily.
I have to also precise that i am about 160 cm tall :/ and 45 kg
Second, I as thinking about making it easy to mount. How? making a Innersuit which would be similar to Spartan Exosuit with real mounts and attachements points which i could dirrectly screw the suit on that
inner exosuit. What do you guys think about? ( Should i use my old motorcycle race suit main frame to make the exosuit and keeping all the carbon guards? )
I am actually orking on a sketch of the livery/paint i would give to the suit, and will show you guys when i am done with the sketch.
So here is my project guys, i would like to know what are you thought about this and what would you recommend me the best for a not too expensive budget on the build.
P.S : i live in Thailand so maybe some stuffs will be really cheap and the heat is really hot.
project TD-I Pepakura Prototype :
- Description :
ODST Variant of Spartan armor
Helmet : Halo 4 ODST Model
Chest/Torso armor : Halo 4 Mark V
Shoulders : Halo 3 ODST
Arms : Halo 3 ODST
Codpiece : -
Legs : Halo 4 ODST
Boots : Halo 4 Mark VI
Gloves : Halo 4 Mark VI*
* I might use my old black motorcycle gloves and attach the protectors on the glove directly.
- Materials :
The materials listed bellow are the materials i planned to use for the prototype I.
- Main shell :
using HJC P.I.M (Premium Integrated Matrix) technology.
- aramid twill epoxy
- Fiberglass twill epoxy
- Utra high Molecular Polyetylene
- Organic Non-woven Fabric*
* I was thinking about replacing the the Organic non-woven fabric by Carbon fiber if i got money
- Inner Protection :
- EVA Foam
- Hard foam
- Polystyrene
- Exosuit : comming soon...
to start i will tell what i can do about crafting, i have been a lot with Racing helmet painting airbrushing, Motorcycle Bodyworks, i used to work a lot on 3DS max 2010 but i didn't touch it for almost 3 years!!
so i think i will need to find out some tutorials for that.
So i will explain my Project a little bit more so that you guys can understand.
First, i was thinking about making a full ODST complete armor and print it all in a 3D printer.
I would like you guys to give me a tip on what material i should use Carbonfiber, Titanium, fiberglass? etc...
( I would like to use it in a paintball fight *making some funny video )
the visor? i was thinking about using my HJC RPHA 10 helmet blue visor since i find that type of helmet visor have a really Halo Visor style and is very strong and flexible.
For the helmet inside i would use some foams from my Old HJC which won't be too fit and to lose So that i can breath easily.
I have to also precise that i am about 160 cm tall :/ and 45 kg
Second, I as thinking about making it easy to mount. How? making a Innersuit which would be similar to Spartan Exosuit with real mounts and attachements points which i could dirrectly screw the suit on that
inner exosuit. What do you guys think about? ( Should i use my old motorcycle race suit main frame to make the exosuit and keeping all the carbon guards? )
I am actually orking on a sketch of the livery/paint i would give to the suit, and will show you guys when i am done with the sketch.
So here is my project guys, i would like to know what are you thought about this and what would you recommend me the best for a not too expensive budget on the build.
P.S : i live in Thailand so maybe some stuffs will be really cheap and the heat is really hot.
project TD-I Pepakura Prototype :
- Description :
ODST Variant of Spartan armor
Helmet : Halo 4 ODST Model
Chest/Torso armor : Halo 4 Mark V
Shoulders : Halo 3 ODST
Arms : Halo 3 ODST
Codpiece : -
Legs : Halo 4 ODST
Boots : Halo 4 Mark VI
Gloves : Halo 4 Mark VI*
* I might use my old black motorcycle gloves and attach the protectors on the glove directly.
- Materials :
The materials listed bellow are the materials i planned to use for the prototype I.
- Main shell :
using HJC P.I.M (Premium Integrated Matrix) technology.
- aramid twill epoxy
- Fiberglass twill epoxy
- Utra high Molecular Polyetylene
- Organic Non-woven Fabric*
* I was thinking about replacing the the Organic non-woven fabric by Carbon fiber if i got money
- Inner Protection :
- EVA Foam
- Hard foam
- Polystyrene
- Exosuit : comming soon...