Pok's 3d Printed O.D.S.T. Build log.

Status
Not open for further replies.

PokProps

Member
So My first O.D.S.T. Builds were from the Andrew DFT templates and I never really liked the detail on them, so I decided that I would 3d print my own set of O.D.S.T. armor and So far it has been a fun project. More progress pictures will be posted as I get pieces done :)

The Materials I am using for this build:


PLA 1.75mm filament:
20200924_202143.jpg


Bondo Glazing Putty:
20200924_202048.jpg

Filler Primer:
20200924_201951.jpg

Sand Paper: 50 grit-1000 grit
20200924_202014.jpg
20200924_202005.jpg

Liquid Latex:
20200924_201937.jpg

Zip ties:
:
20200924_202036.jpg

and Spray Paint:
20200924_201921.jpg
20200924_201930.jpg


I currently have the Gauntlet, belt, Butt, and shoulder buckles printed and bondo'd and the chest ready to be painted again.
IMG_20200916_205004_783.jpg
IMG_20200917_122311_337.jpg
IMG_20200919_133851_294.jpg
20200913_144009.jpg


If this is in the wrong forum or If i did something wrong please let me know, I'm still new to the forums.
 

Attachments

  • 20200924_202014.jpg
    20200924_202014.jpg
    33.9 KB · Views: 192
  • 20200924_202014.jpg
    20200924_202014.jpg
    33.9 KB · Views: 202
So My first O.D.S.T. Builds were from the Andrew DFT templates and I never really liked the detail on them, so I decided that I would 3d print my own set of O.D.S.T. armor and So far it has been a fun project. More progress pictures will be posted as I get pieces done :)

The Materials I am using for this build:


PLA 1.75mm filament:
View attachment 296878

Bondo Glazing Putty:
View attachment 296879
Filler Primer:
View attachment 296880
Sand Paper: 50 grit-1000 grit
View attachment 296881View attachment 296883
Liquid Latex:
View attachment 296884
Zip ties:
:View attachment 296886
and Spray Paint:
View attachment 296887View attachment 296888

I currently have the Gauntlet, belt, Butt, and shoulder buckles printed and bondo'd and the chest ready to be painted again.
View attachment 296889View attachment 296890View attachment 296891View attachment 296892

If this is in the wrong forum or If i did something wrong please let me know, I'm still new to the forums.
i really like the look of the ODST i will be watching this build. great job so far
 
So My first O.D.S.T. Builds were from the Andrew DFT templates and I never really liked the detail on them, so I decided that I would 3d print my own set of O.D.S.T. armor and So far it has been a fun project. More progress pictures will be posted as I get pieces done :)

The Materials I am using for this build:


PLA 1.75mm filament:
View attachment 296878

Bondo Glazing Putty:
View attachment 296879
Filler Primer:
View attachment 296880
Sand Paper: 50 grit-1000 grit
View attachment 296881View attachment 296883
Liquid Latex:
View attachment 296884
Zip ties:
:View attachment 296886
and Spray Paint:
View attachment 296887View attachment 296888

I currently have the Gauntlet, belt, Butt, and shoulder buckles printed and bondo'd and the chest ready to be painted again.
View attachment 296889View attachment 296890View attachment 296891View attachment 296892

If this is in the wrong forum or If i did something wrong please let me know, I'm still new to the forums.
This is noce. Gonna be watching this as well
 
Quick Update: Had to take a few days off this project because of printer issues. But I fixed them and am now working on my next parts. sorry for the lack of progress reports.
 
Quick Update: Had to take a few days off this project because of printer issues. But I fixed them and am now working on my next parts. sorry for the lack of progress reports.
Its all cool. Just still gonna watch your progress
 
This will be my first time watching a build form start to finish. Also, don't worry bout large amounts of time in between updates. As they say, slow and steady wins the race. I'm excited to see this all come together.
 
Your forearm piece looks a little long. The wrist gasket appears to be in the right spot but the inner elbow also has a flexible gasket between the two gratings on the front and back which would be going through your arm currently. If you can shorten up the cuff at the wrist it might fix things a little and bring the elbow guard into place.
 
Your forearm piece looks a little long. The wrist gasket appears to be in the right spot but the inner elbow also has a flexible gasket between the two gratings on the front and back which would be going through your arm currently. If you can shorten up the cuff at the wrist it might fix things a little and bring the elbow guard into place.
I can see how it looks that way in the picture. The Forearm is a little loose right now and whenever I take pictures I slide it Up more than it should so it stays in place. But after I pad it up and fix it to where it fits on my forearm perfectly. I appreciate the feedback and I'll take it into consideration. <3
 
I can see how it looks that way in the picture. The Forearm is a little loose right now and whenever I take pictures I slide it Up more than it should so it stays in place. But after I pad it up and fix it to where it fits on my forearm perfectly. I appreciate the feedback and I'll take it into consideration. <3
Just looking out for a fellow Helljumper builder (y)
1601919200326.png
 
Quick Update about the ODST Build. I decided to take a break from this build and move to a build I'm way more excited to do. most people know what it is but those who don't will know soon enough. This isn't me giving up on the ODST, this is just me putting it to the side for a while. I hope you all can understand.
 
Status
Not open for further replies.
Back
Top