Wow! There sure is a whole lot of progress being made by the community! Now we have all the pep files for all the different permutations found in halo 3 except for the hayabusa helmet. Great job to everyone who has helped model these for the community.
Well anyways, I have been seeing stuff about the busa helmet everywhere lately. First there were the shoulders. Then there was Skupilkinson's Chest. Now Spartan 051 has decided to model a busa helmet.
If you read through my project bumblebee topic, you probably heard me say that I'm a perfectionist. Please don't take this personally, its just I for the most part like to do things like this myself. So that I know if it is really accurate ot not. Personally I think I have OCD. It sucks because anything I do that doesn't come out right I start completely over and redo it.
But anyways, to get to the point, I too have decided to model the busa helmet. I started late last night and I am starting to get somewhere already. Everything so far is pretty low poly, but once I get a little bit farther I will up the poly count. Well here are my renders so far... tell me what you think.
Oh, and please note I still got a long ways to go so alot things have still gotta be fixed. (the crown for example needs to be slightly changed.
Oh and in case anyone was wondering, I am planning on releasing this to the community, so definately post what you think!
***** EDIT *****
Here are all the different unfolds of my Hayabusa Helmet.
My unfold will be slightly easier to put together than the other two but will take more paper. I set it up so that way if you assemble it in the order of the pages starting with the mouth first it would be a whole lot easier to put together. I spent 5 hours believe it or not trying to make sure it was unfolded perfectly. I checked every edge and flap maikng sure it would be easy.
Ral Partha's and Crackhead09's unfolds are going to be slightly tougher to put together, but will take less paper. In my opinion they both look very similiar so I couldn't just post one.
It all just depends on your style of folding.
Anyways if you use these files please give credit to me (Agbates) for making the 3d model, and credit to whichever person unfolded the file you used, whether it was me (Agbates), Ral Partha, or Crackhead09.
Well here they are, happy unfolding!
<a href="http://www.4shared.com/file/55971021/23801b1f/Agbates_-_Hayabusa_Helmet.html?dirPwdVerified=eb8071b2" target="_blank">
Agbates's Hayabusa Helmet, unfolded by Agbates
</a>
<a href="http://www.4shared.com/get/55478928/941bc460/Hayabusa_Helmet_by_agbates.html" target="_blank">
Agbates's Hayabusa Helmet, unfolded by Ral Partha
</a>
<a href="http://www.4shared.com/get/55462792/cf79106b/Hayabusa_unfold_by_crackhead09.html" target="_blank">
Agbates's Hayabusa Helmet, unfolded by Crackhead09
</a>
Well anyways, I have been seeing stuff about the busa helmet everywhere lately. First there were the shoulders. Then there was Skupilkinson's Chest. Now Spartan 051 has decided to model a busa helmet.
If you read through my project bumblebee topic, you probably heard me say that I'm a perfectionist. Please don't take this personally, its just I for the most part like to do things like this myself. So that I know if it is really accurate ot not. Personally I think I have OCD. It sucks because anything I do that doesn't come out right I start completely over and redo it.
But anyways, to get to the point, I too have decided to model the busa helmet. I started late last night and I am starting to get somewhere already. Everything so far is pretty low poly, but once I get a little bit farther I will up the poly count. Well here are my renders so far... tell me what you think.
Oh, and please note I still got a long ways to go so alot things have still gotta be fixed. (the crown for example needs to be slightly changed.
Oh and in case anyone was wondering, I am planning on releasing this to the community, so definately post what you think!
***** EDIT *****
Here are all the different unfolds of my Hayabusa Helmet.
My unfold will be slightly easier to put together than the other two but will take more paper. I set it up so that way if you assemble it in the order of the pages starting with the mouth first it would be a whole lot easier to put together. I spent 5 hours believe it or not trying to make sure it was unfolded perfectly. I checked every edge and flap maikng sure it would be easy.
Ral Partha's and Crackhead09's unfolds are going to be slightly tougher to put together, but will take less paper. In my opinion they both look very similiar so I couldn't just post one.
It all just depends on your style of folding.
Anyways if you use these files please give credit to me (Agbates) for making the 3d model, and credit to whichever person unfolded the file you used, whether it was me (Agbates), Ral Partha, or Crackhead09.
Well here they are, happy unfolding!
<a href="http://www.4shared.com/file/55971021/23801b1f/Agbates_-_Hayabusa_Helmet.html?dirPwdVerified=eb8071b2" target="_blank">
Agbates's Hayabusa Helmet, unfolded by Agbates
</a>
<a href="http://www.4shared.com/get/55478928/941bc460/Hayabusa_Helmet_by_agbates.html" target="_blank">
Agbates's Hayabusa Helmet, unfolded by Ral Partha
</a>
<a href="http://www.4shared.com/get/55462792/cf79106b/Hayabusa_unfold_by_crackhead09.html" target="_blank">
Agbates's Hayabusa Helmet, unfolded by Crackhead09
</a>