CrimsonViper97 is it possible to get a closer look at the hardware at the bridge/instep of the boot with the three straps holding the toe and heel plates in place? It looks like there's a rivet or a snap fastener on the inside but that outside buckle is interesting and I've never noticed it before.
While getting those pictures of the bood buckle I discovered that the same asset appears to have been used in three different places throughout the suit. I'll start with the boot buckle:
Now lets take a look at the hip:
And finally the abdominal area of the undersuit:
It looks to me like they just scaled the same asset. I have, coincidentally, already modeled this particular piece as it appears on the hip and it can be found here: ODST Hip Hardware STLs
I'm in the process of patterning the undersuit, so I will no doubt create resized and slightly modified versions for it's various application.
What an amazing thread! Thank you so much for uploading these, I am planing to have a go at a more accurate under-suit, and these are absolutely perfect!
I had trouble finding good undersuit reference out there so I figured everyone else was too NobleofDeath16 also has a really good general ODST reference pack.
Thank you for posting this thread. I had such a hard time finding quality reference pictures. I had taken as many as I could on my own, but I never could get everything. This is really really helpful!