Should cut this part or no?

[BrunoCast]

hi everybody, today I was cutting my first helmet, the one for master chief costume, but I don't now if I should cut this line:

(if yes, shoul I do it for all the same parts?)

 

[vshore100]

hi everybody, today I was cutting my first helmet, the one for master chief costume, but I don't now if I should cut this line:

(if yes, shoul I do it for all the same parts?)

Yes, cut the solid line and pull it toward the mountain fold. Do this for all, no matter how small.(Hey I just rhymed,...chirp chirp, HUH!) Anyway, It's not much but may throw you off down the line.

Just my opinion though. Good luck with it!

 

[mattmann1]

You should cut it but you don't have to glue it 394 and 122 should keep it in place.

 

[Corin]

yes you should cut it those cuts keep the shape of the particual peice of card and will add a small hill on that area that is there. it si there for a reason, also make sure you glue it 394 and 122 will keep it in place but the tab will stick out and make it look untidy.

 

[BrunoCast]

Thanks to everybody! Your replys help me.

Sorry bad english... (Portuguese)

 

[soul products]

if you do cut it be sure to seal up the back with something like hot glue before you resin

 

[bobvdijk]

yea, you should cut i
btw, why did you name your helmet file elmo?

 

[McPrimus]

I would recommend that you cut it, then cut a scrap piece of card stock into a patch, and hot glue that patch on the inside to make that a solid connection. It will give you extra strength and keep the resin in check as posted earlier.

 

[Sarigueya2]

[/URL] Uploaded with ImageShack.us[/IMG]
Same problem here... but a little worse