Unfold needed

[Evil Jester]

I have a pep I need unfolded. I completely suck at unfolding and really want to build this. The pep is for the Tron Legacy Rinzler 2 part Disc.

Here is the link too the pep. http://www.4shared.com/file/QnL_dxtP/tron_rinzler_disc.html

 

[Spartan Jason]

Dude, even if you got someone to unfold that, it would be almost impossible to make.

 

[wiyumishere]

Someone has already made a tron identity disk if thats what you mean by disk and it is very possible to make

 

[aktaylorh]

I think what he was talking about was the actual pep file. its very very thin and would be very difficult to construct. You might have a better time constructing it out of plastic or wood and bondo.

 

[Road Kill]

i will try to unfold it

 

[Evil Jester]

Spartan Jason, I have the unfolded pep for Sam's disc. I tryed to replicate it to unfold this one but failed. It is 2 halves. If it is 1/2 inch thick or so each then it works out perfect. But I have no idea how to do it.

wiyumishere, it will be just like the disc you are talking about. Just split in 2. If I remember right, the disc I saw was almost 2 inches thick.

Road Kill, if you can pull it off you will be a rockstar.

 

[Sgt Whoopass]

i did notice that the other one is a little thick, it was less frisbee like then i thought it would be, of course you could scale it but i digress….

 

[Evil Jester]

The thickness is one of the things I wasn't sure how to fix. All I know is if each side was at least 1 inch thick, it would work better.

Sucks if I can't get it to work. I would be inlaying El Wire around the edge with the second layer of resin so it would glow just right.