Free 3D Model Index

[DylanMarx]

What happened to the M73 LMG? The link isn't working.

 

[ReClaimer8015]

DylanMarx do you mean the Saw?!

This is a low poly i have from CPO mendez, and i do believe i got the LMG from the FFA Series too.
Just have to find the right usb-stick PM me or ask TurboCharizard if he can fix the link, i wont host models i didnt create myself....

 

[TurboCharizard]

DylanMarx do you mean the Saw?!
View attachment 267374
This is a low poly i have from CPO mendez, and i do believe i got the LMG from the FFA Series too.
Just have to find the right usb-stick PM me or ask TurboCharizard if he can fix the link, i wont host models i didnt create myself....

I'm not getting an error on either of the links, which one are you fine folks having issues with?

 

[ReClaimer8015]

As i already mentioned CPO mendez - TurboCharizard can you link to his models as well?

 

[DylanMarx]

My bad, the link in to the LMG by Thom thread is fine. The link for the download isn't working.

 

[PerniciousDuke]

He's referring to the download link in the first post on this thread: FFA series number 14: M73 LMG

I've messaged Thom to see if he can upload it to the site.

 

[ReClaimer8015]

Further additions!
Low poly but as game accurate as you can get.
I have not looked into all of the links, don`t know if 4shared still works for everyone....
I have most of the models, so do tell if you miss a certain file.
Source here: Mendez's Halo weapon 3D print file dump [Download] (HELP NEEDED)

All Credits and praise goes to CPO mendez
He has a thingiverse site too.

I actually made good use of them, currently drawing stencils for lasercutting again, using his data. If i am allowed to show bits of it here TurboCharizard ? Is it also possible to give hints where to find other freely available 3d models outside the 405th (under CC-license/ with Autor mentioned)?

Spoiler: Because i have loads of it, believe me

Starting off with

UNSC Weapons

(Halo 2 Anniversary)
https://www.4shared.com/rar/avFldPqsba/H2A_Battle_Rifle.html

(Halo 3 Odst)
https://www.4shared.com/rar/Mga7azrpca/ODST_pistol.html

(Halo Reach)
https://www.4shared.com/rar/fm23Mr_Aba/Halo_Reach_Assault_Rifle.html
https://www.4shared.com/rar/PrGFhmjdba/Halo_Reach_Shotgun.html

(Halo 4)
https://www.4shared.com/rar/3nSugW3aca/H4_magnum.html
https://www.4shared.com/rar/pnEGOSAjei/H4_DMR.html
https://www.4shared.com/rar/XoPwDtO2ca/H4_Battle_Rifle.html
https://www.4shared.com/rar/yImmwO1eca/Frag_grenade.html
https://www.4shared.com/rar/Ls2qSPBBce/H4_Assault_Rifle.html
https://www.4shared.com/rar/ViZh4yzoce/H4_Sticky_Detonator.html
http://www.4shared.com/rar/Yh9ginEuce/Halo_4-5_Shotgun.html
http://www.4shared.com/rar/Umsc5uxvba/Railgun.html
http://www.4shared.com/rar/siO55PvGba/H4-5_SAW.html

(Halo 5/ Guardians)
http://www.4shared.com/rar/cyLIh5_tba/Halo_5_Sniper_Rifle.html
http://www.4shared.com/rar/6xQMCiwjce/Halo_5_Spartan_Laser.html
http://www.4shared.com/rar/CH0ZdJ-Yba/Halo_5_Battle_Rifle.html
http://www.4shared.com/rar/ij9jdb0sba/Halo_5_DMR.html

https://www.4shared.com/rar/mVzrIQ1Pce/Halo_5_Hydra.html

http://www.4shared.com/rar/32kCGsoQce/Halo_5_Magnum.html
http://www.4shared.com/rar/n_qwLuCqce/Ma5c.html

http://www.4shared.com/rar/afHZkL5uce/H5_AR.html

https://www.4shared.com/rar/sNW6raGfba/Halo_5_Grenade_Launcher.html

 

[ReClaimer8015]

And here`s the rest of them....

Covenant Weapons

(Halo Reach)
https://www.4shared.com/rar/juzqvALMce/Plasma_Rifle.html
https://www.4shared.com/rar/0PLsA91xce/Plasma_Repeater.html
https://www.4shared.com/rar/EOSevFI2ba/Concussion_Rifle.html
https://www.4shared.com/rar/EOSevFI2ba/Concussion_Rifle.html

(Halo 4)
http://www.4shared.com/rar/XZD8_31gba/Covenant_Carbine.html
http://www.4shared.com/rar/UUfaVX2Iba/Storm_Rifle.html
https://www.4shared.com/rar/1uP8BMgNce/Halo_4-5_beam_rifle.html

https://www.4shared.com/rar/MkgoFkgNca/Plasma_Grenade.html

https://www.4shared.com/rar/DQQuMZ34ei/Plasma_Pistol.html

Forerunner Weapons

http://www.4shared.com/rar/qCVOj4qjce/Suppressor.html
http://www.4shared.com/rar/-IJRrPrBce/Light_Rifle.html


Some of files need a little bit of clean-up before printing. They`re also usable for animations.

 

[SquishyShoes]

I'm having trouble opening any of these links. Whenever I open them it just opens a 4hsared page with "The file link that you requested is not valid. " Is anyone else having similar troubles or know what's going on?

 

[ReClaimer8015]

I'm having trouble opening any of these links. Whenever I open them it just opens a 4hsared page with "The file link that you requested is not valid. " Is anyone else having similar troubles or know what's going on?

Yeah, i thought so.. haven`t checked it myself, was on mobile...
I have most files but i would have to convert to a format everybody can open. Obj. probably.

Ok - Can`t upload a zip.file directly on the forum it seems.
Have to work out something else.

 

[ReClaimer8015]

After all this is what i get as a failure message whenever i try to upload a single file:

Carbine.obj
The uploaded file does not have an allowed extension.

Doesn`t work
I could share via onedrive, that should be accessible for some of you. But i actually don`t want to host the files directly on my profile, looking as if they`re my work - which they are not.

 

[ReClaimer8015]

SquishyShoes maybe you`ll look into his thingiverse, if it is still up. PM me if you want a certain file.
If any other member can help, please jump in.

 

[SquishyShoes]

Fair enough, I'll try thingiverse. I'm not sure what's up with 4shared/these links. It used to be a really reliable hosting service.

EDIT: I believe I found him on thingiverse under misterchiefcostuming

 

[BDUB]

I like this thread. Just saying. Great work Turbo!

 

[MoeSizzlac]

Updating for Halo 3 ODST Armor Set (Rookie I think) - Halo 3 ODST - Rookie - Full Armor Set

 

[Recon Assassin]

The files here show some amazing 3D talent. This is a great resource for us all. I have my first 3D printer about to go live and these files make it worth testing out sooner than later.

 

[ponti dude]

does anyone know of any halo 2 or halo 2 anniversary master chief armour models? i have some really low poly files but they are taken from a pepakura file and cannot be printed.
ps. the models on this thread are awesome

 

[MoeSizzlac]

Updating for Halo Wars Mark IV

HALO WARS - MARK IV ARMOR SET - INCLUDING HELMET

 

[MoeSizzlac]

Adding Red vs. Blue - Agent Maine's Chest piece and shoulder setup: Halo 3 - Agent Maine - Red VS. Blue - Shoulder/Bicep/Chest add ons for Mjolnir Mark VI by moesizzlac

 

[MoeSizzlac]

Adding Tactical Magnum from Halo 5

Halo 5 - M6H2T Tactical Magnum by moesizzlac

This was a remix of Blackace936's Gunfighter Magnum (an awesome model). I took that gun along with game assets made available by 405th's Chernobyl and we finally have a printable tactical magnum from Halo 5. The game assets was taken from here...

www.thingiverse.com