H3 Chief Armor - Build Progress

ExCeLLuR8

Active Member
Yeah.. unfortunately slightly to small. Way to tight on my thigh and can't get it to slide up any higher. Just re-scaled and cutting new templates for the 2nd attempt. The first one turned out perfect so if someone wants it let me know, it would fit someone else slightly smaller than me perfectly. Just let me know!

part0.jpg part003.jpg part004.jpg part001.jpg
 

PaiganBoi

Sr Member
The scale of the thigh is actually pretty spot on. Just comparing with a ref photo the length is just right. You'll just have to adjust it a little so it's not so snug.
 

ExCeLLuR8

Active Member
The scale of the thigh is actually pretty spot on. Just comparing with a ref photo the length is just right. You'll just have to adjust it a little so it's not so snug.
Yeah its so close to being spot on. Honestly it looks good but I dremeled a lot out on the inside but it's still tight. I can bare walk honestly just from my leg flexing inside. I scaled it up slightly bigger just to get it to loosen up a little more. I'm just gonna build another and make it more perfect. Haha
 

zachturner009

Active Member
No one going to comment on those tacticool crocs? No one? Bro badass crocs, also the thighs are nice too, maybe some upholstery foam to snug up the thigh, perhaps on the "far" side, like not inner thigh but the outer thigh. Worked for me like (some clever reference someone)
 

ExCeLLuR8

Active Member
No one going to comment on those tacticool crocs? No one? Bro badass crocs, also the thighs are nice too, maybe some upholstery foam to snug up the thigh, perhaps on the "far" side, like not inner thigh but the outer thigh. Worked for me like (some clever reference someone)
Haha thanks man! Chief knows all about the crocs! The first thigh piece was way to tight, couldn't get it on all the way or even walk it was so tight to my quad. Just finished the new slightly scaled up one and its even better seam work and fits perfect!
 

Sean Anwalt

RCO
405th Regiment Officer
That looks great! My thighs fit pretty tight as well. Then the holidays (and binging food before then) hit, and now they're *TIGHT*

I am way impressed with the foam work, man. Great job!
 

ExCeLLuR8

Active Member
Good productive weekend, got both thigh pieces done and they're looking real good compared how they look on chief. Still have to fit them and strap them, but they do fit my legs perfect. Can't wait to start the shin pieces next. Can't believe how fast this suit is coming together!

IMG-20181230-WA0014.jpg IMG-20181230-WA0010.jpg IMG-20181230-WA0005.jpg 2018-12-30 19.55.08.jpg 2018-12-30 19.56.24.jpg
 
Last edited:

Dirtdives

RXO & Keeper of Con Lists
405th Regiment Officer
Community Staff
3/4 of an inch isn't much but if you think they are too tight....you could always splice in a piece on the inner part where no one will see it. Once you post a pic of you wearing it we'll be able to see what you are talking about. But from what I see.....the whole thing looks FANTASTIC!!!!! Cod piece looks ok......don't want to go back to weird.......:cautious:


Sean Antwalt's tight thighs not withstanding,....... but bringing us right back to weird.
 

ExCeLLuR8

Active Member
3/4 of an inch isn't much but if you think they are too tight....you could always splice in a piece on the inner part where no one will see it. Once you post a pic of you wearing it we'll be able to see what you are talking about. But from what I see.....the whole thing looks FANTASTIC!!!!! Cod piece looks ok......don't want to go back to weird.......:cautious:


Sean Antwalt's tight thighs not withstanding,....... but bringing us right back to weird.
Thanks man!! Yeah these thigh pieces in the last photos are my newest ones and they fit perfectly. It's amazing how scaling up a piece by 1 inch makes such a huge difference to the fitment of a piece. These newest thigh pieces also scale out really close to how master chief looks in the game as far as where they land on the hips and how close they are to the waist piece of the cod. I'm really stoked with how this is coming together. I've actually spent the last few days playing with paint techniques on my spare trashed armor pieces I won't be using so I'm getting a plan going for that and a little practice too. I probably will spend just as much time painting this thing as I have been building it. Haha
 

SI3RRA 117

Well-Known Member
Foam works looking amazing. I think you might run into a small problem with the length of your thighs. You don’t have quite the legs that Chief has length wise. You got the spacing between the cod and thigh looking good. But looks like your going to be bumping into the shins on the other end. This is where video game proportioning and real life human proportions come into play. Hopefully it all works out and I’m wrong. Good luck with the rest of he build. Can’t wait to see the painting stage
 

ExCeLLuR8

Active Member
Foam works looking amazing. I think you might run into a small problem with the length of your thighs. You don’t have quite the legs that Chief has length wise. You got the spacing between the cod and thigh looking good. But looks like your going to be bumping into the shins on the other end. This is where video game proportioning and real life human proportions come into play. Hopefully it all works out and I’m wrong. Good luck with the rest of he build. Can’t wait to see the painting stage
Thanks man! I think the angle of the pics makes the thighs look longer than they actually are. I'm still fitting them with heat and molding around the knee, but i have decent range of motion when bending my knee. I'm using pics of justin branfuhr'so suit as well when scaling and so forth. Playing around when wearing these I have about the same amount of knee showing as his suit does on him. I also talked to him about how he did his paint job so I'm actually going to use a lot of those techniques with the paint too! I'm excited to see it all starting to come together. I really appreciate everyone's feedback!

Screenshot_2019-01-02-19-02-03.png
 

Badkitty

Member
That looks really great!! It's probably a lot more comfortable then my fiberglass build from 8 years ago too!! Keep up the good work!! I really want to see what it looks like when you're all done.
 

ExCeLLuR8

Active Member
That looks really great!! It's probably a lot more comfortable then my fiberglass build from 8 years ago too!! Keep up the good work!! I really want to see what it looks like when you're all done.
Thanks man! Yeah its actually really comfortable. This has seriously been a super fun project. I'll have to find some local 405th friends to do some spartan pics with once it's all done
 

ExCeLLuR8

Active Member
Playing around with paint mixtures on my spare junked forearm piece. Color is not there yet but I'm definitely digging the green metallic look from the game. More classic halo 2 look right now, need to get it a little more green like h3. I will also be doing shadowing around all the edges with my airbrush, just didn't feel like starting that up last night. Haha
imagejpeg_2.jpg imagejpeg_0.jpg
 

Dirtdives

RXO & Keeper of Con Lists
405th Regiment Officer
Community Staff
From what I recall......someone said the closest color is Oregano. Give that one a try.
 

ExCeLLuR8

Active Member
From what I recall......someone said the closest color is Oregano. Give that one a try.
Cool man will do. Justin from stoney props gave me some pointers on paint mixtures and colors. I don't have it quite right yet but heading in the right direction for sure. Playing with the metallic paints he recommended is really fun. Buy yes... I need to get back to business and start the shins, the files are mostly ready just need to print templates this evening. Thanks guys!
 

Dirtdives

RXO & Keeper of Con Lists
405th Regiment Officer
Community Staff
I have to go back to the beginning of your thread and catch up.......but your suit is like Parkay Margarine....I can't believe its "foam".....
 

ExCeLLuR8

Active Member
I have to go back to the beginning of your thread and catch up.......but your suit is like Parkay Margarine....I can't believe its "foam".....
Thanks man that really means alot! I know this will sound silly.. but my goal is to make this suit look as real as possible to a point where people or kids may think it's real for a split second. When ever I see pictures of Justin branfuhr's suit, that's how his looks. Straight out of the game almost.
 
Top