- Hall of Honor - Post Pics of your finished armor/weapons

Discussion in 'Halo Costumes and Armor' started by ReheatedHeroics, Nov 7, 2006.

  1. Fractal 017

    Fractal 017 New Member

    My first armor: inspired from the Mk.6, Recruit and Wetwork variants. Scrap build. :)
    It was finished in early 2015
    IMG-20160314-WA0002.jpg

    IMG-20160314-WA0002.jpg
     
  2. Evolver79

    Evolver79

    Pics from DragonCon my FUD build.
    image.jpeg

    image.jpeg

    image.jpeg
     
    DosasterRus and Jme like this.
  3. dadatown

    dadatown New Member

    Hi everybody - this is my first post I think - been lurking around here for a few years. I guess I discovered that I really enjoyed being crafty one Halloween when my son wanted to be Master Chief and there was no child's costume to be found. Since that first Master Chief where my then 6 year old son went from house to house looking like a bobble head I've burned the midnight oil to send him off each year in something new. Last year he went in the (mostly) Wetwork Armor topped off with a scratch foam Pilot Helmet and skull vacu-form that i was lucky enough to purchase from Doc Daily. The foam armor was mostly scratch made with the enormous help of images from the wetwork build done by the Impact Props guys - super talented and they don't know it but thanks to their build logs I was able to get this armor done.

    Apologies for the sideways pics - not sure why they uploaded that way!
    Test fit - before weathering and likely a million other "to-do's"
    20151023_184356.jpg 20151023_184405.jpg 20151023_184420.jpg

    Couple close-ups
    20151115_212005.jpg 20151115_211744.jpg 20151115_211826.jpg


    Months of work for a couple hours of enjoyment. in the dark.
    20151031_181135.jpg 20151031_180848.jpg

    and the bobble head :)
    gillphonenov182014 736.jpg

    20151023_184405.jpg

    20151023_184356.jpg

    20151023_184420.jpg

    20151115_212005.jpg

    20151115_211744.jpg

    20151115_211826.jpg

    20151031_181135.jpg

    20151031_180848.jpg

    gillphonenov182014 736.jpg
     
  4. peterthethinker

    peterthethinker

    I never posted my Shipmaster Rtas'Vadume when i compleated him on 4/1/16

    vlcsnap-2016-04-06-21h29m17s225.png vlcsnap-2016-04-06-21h29m33s93.png vlcsnap-2016-04-06-21h29m42s0.png
    * Pics shot at the PDX Microsoft store for a event*

    Everything besides the top of the helm is 3D printed! .
    Est time to make and print was 500-600H
    Its a mix of halo4 for the body file
    and H2A for the head. I drafted all the helm parts from scratch.

    Nylon/spandex blend undersuit with a lite hex on it by useing a landry bag and a can of spray paint

    back spine is on a 3 inch wide elastic strap that velcros to the undersuits zipper. Thus If I move the spine follows!
    boots are printed with shoes in them glued. ( used RTV) soles of boots are EVA .

    vlcsnap-2016-04-06-21h29m17s225.png

    vlcsnap-2016-04-06-21h29m33s93.png

    vlcsnap-2016-04-06-21h29m42s0.png
     
    DosasterRus, Steveeemega and RYNO 666 like this.
  5. uttay44

    uttay44 New Member

    Finished my first set of armor! I can't wait to wear it to my school's Halloween festival! armor 1`.jpg armor 2.jpg armor 3.jpg

    armor 1`.jpg

    armor 2.jpg

    armor 3.jpg
     
    RYNO 666 likes this.
  6. locostorm

    locostorm

    i posted on here a wile back but now i have some better pics so let me know what you think now!!! also their part of my senior pictures so be nice.
    caenan-58_orig.jpg
    caenan-60_orig.jpg
    caenan-56_orig.jpg
    14047368_1080497502029542_677044722869228519_o.jpg

    caenan-58_orig.jpg

    caenan-60_orig.jpg

    caenan-56_orig.jpg

    14047368_1080497502029542_677044722869228519_o.jpg
     
    SierraJeep likes this.
  7. RYNO 666

    RYNO 666 Well-Known Member

  8. RYNO 666

    RYNO 666 Well-Known Member

    Son's CQC I built. feff90b6caa33215517490a44d383095.jpg

    Sent from my 2PS64 using Tapatalk
     
    JuiceGuzzler likes this.
  9. aracknoid3

    aracknoid3

    Re: Some pics of my Armor

    Awesome photos!

    - - - Updated - - -

    Love it!
     
  10. Callmecowboy93

    Callmecowboy93 New Member

    My finally finished ODST armor!

    I took a couple months, and some help from Andrew dft on YouTube but it's complete! All out of EVA foam. IMG_0999.JPG IMG_1001.JPG IMG_0997.JPG IMG_0984.JPG

    IMG_0999.JPG

    IMG_1001.JPG

    IMG_0997.JPG

    IMG_0984.JPG
     
    SI3RRA 117 and TurboCharizard like this.
  11. Sentri

    Sentri

    DSCN1681.JPG

    I have to say that this is my favorite pic of my suit.

    DSCN1681.JPG
     
  12. Athear

    Athear New Member

    That is an amazing build I love it. I need blue prints for HP armour. that isn't in Pep.
     
  13. mblackwell1002

    mblackwell1002

    Hey, guys! I thought I'd contribute.:D
    this is my first build, and I'm very happy with the outcome

    102_0083.JPG

    102_0083.JPG
     
    PinnacleCosplay and RYNO 666 like this.
  14. MasterChiefess

    MasterChiefess New Member

    I just finished my costume last night, and for my first every attempt at anything like this I am very proud of the outcome. Actually I also had a deadline of three months because of an event I am attending tonight, so making my first costume in three months while dealing with school at the same time I believe deserves som cred haha :)

    I used pepakura and fiberglass/resin, as well as some bondo to make it.
    The gun is a nerf gun (Swarmfire) painted to fit in.
    I have also installed lights in shoulders, thighs and helmet but they're not on in the pictures.

    Also god dammit, the hardest part was definately to scale down the parts to my size... Master chief is taller than 6'5" and I'm only 5'1" haha.
    15450923_1467680516582955_2081660715_n.jpg 15416145_1467680553249618_1870633095_n.jpg

    15450923_1467680516582955_2081660715_n.jpg

    15416145_1467680553249618_1870633095_n.jpg
     
  15. jerryboberri224

    jerryboberri224

    I'm pretty noob in this of making armors and prop making (started in 2015) but, I've been getting much better :) so, this is my 2nd ODST armor (ignore the feet, I didn't use the boots for the photo haha)
    15403646_1155946807820670_8617019274615046009_o.jpg
     
    Last edited: Jan 6, 2017
    DosasterRus likes this.
  16. TheSafariMan

    TheSafariMan Member

    Some of my ODST pictures from various cons here in Ireland!

    13879398_1803951089840324_9136484713016139979_n.jpg
    13872802_1803949096507190_5332664321775193101_n.jpg
    13895390_1805496546352445_6276231197945387385_n.jpg
    13886468_1805496473019119_3671342356099215412_n.jpg
    14910498_1850685685166864_9164222268753639903_n.jpg
    15135775_1241742059217778_4059499467711677028_n.jpg

    You can see more of my Halo 3 Turret here!
     
    DosasterRus likes this.
  17. morkar78

    morkar78

    My completed H4 armor:

    corazza_completa_Febbraio2017 (7).JPG corazza_completa_Febbraio2017 (9).JPG corazza_completa_Febbraio2017 (14).JPG corazza_completa_Febbraio2017 (27).JPG corazza_completa_Febbraio2017 (29).JPG corazza_completa_Febbraio2017 (30).JPG corazza_completa_Febbraio2017 (31).JPG corazza_completa_Febbraio2017 (33).JPG corazza_completa_Febbraio2017 (38).JPG corazza_completa_Febbraio2017 (42).JPG corazza_completa_Febbraio2017 (44).JPG corazza_completa_Febbraio2017 (45).JPG corazza_completa_Febbraio2017 (47).JPG
     
    Jme, Dirtdives and mawrTRON like this.
  18. Johnchristopher

    Johnchristopher New Member

    [how did you do it?
    i want the same mjolnir.
     
  19. Johnchristopher

    Johnchristopher New Member

    how did you do it?

    have you the panes?

    or some tutorial video?
     
  20. morkar78

    morkar78

    Hi John,
    it is all pepakura: paper, fiberglass, resin and bondo. I don't have a tutorial, sorry, but you cal follow the process taking a look at my thread...
     
  21. Johnchristopher

    Johnchristopher New Member

    hello morkar78
    my best regards in advance.
    regarding the MJOLNIR.
    I've seen it on sale.
    i do wish you could see it by yourself but i cannot post the picture because is too large.
    or i do not know how to do it.
    anyway as a always say i'll put on sale my organs to get it.
    and farewell my friend.
     
  22. whereisdanielle

    whereisdanielle 405th Regiment Officer

    Hey all thought I'd finally join the bandwagon, here are my current two halo suits, Halo 4 Master Chief made in 2013(?) and Halo 5 Kelly made in 2015/2016
    I constructed both from foam, with the exception of Kelly's helmet which was 3D printed by Roshprops

    14517669_769148766561725_4878284785154303508_n.jpg
    10376851_434887596654512_290367333330638879_n.jpg 17103277_1265614503523545_7839885194035145456_n.jpg 14543718_771996709610264_1755799861132395884_o.jpg 13998_476836529126285_4380325147655684231_n.jpg

    14448922_770290336447568_8200916251429979531_n.jpg
    16807206_850400348436566_2778446776561478931_n.jpg 13894991_742439815899287_4870131643377295954_n.jpg 13418779_718735788269690_1599765070332632405_n.jpg 14492399_771290983014170_8147836901643444905_n.jpg

    Here they are side by side at PAX Australia last year, a friend of mine is luckily just able to get into the Chief suit.

    17159140_1274842139267448_6355702130091686579_o.jpg
    14976738_790204774456124_3284070351667209485_o.jpg
     
    Last edited: Mar 11, 2017
  23. RetiredClone

    RetiredClone New Member

    Stunning work, well done!
     
    whereisdanielle likes this.
  24. Distemper

    Distemper

     
  25. Chiefwannabe

    Chiefwannabe

    how did i forget to post here?!
    so I've had my odst for just under a year now and its had a few changes but ill just show the most recent variation of it. Im going to give it to my cousin to wear to conventions once i finish my halo reach master chief build.
    These photos are from RTX Sydney 2017
    DSC00668.jpg DSC00675.jpg DSC00684.jpg DSC00698.jpg DSC00703.jpg DSCF9553.jpg DSCF9556.jpg
     
    Str4uby and mblackwell1002 like this.

Share This Page