LifeofBidney
New Member
Firstly I would like to apologize for anything that is wrong, misplaced anywhere, or no understanding
for this is my first post on anything about my 'projects' other than Facebook. I am new to this site and
still learning things as I have spent the last nine hours maneuvering around this site.
Second I want to add that everyone on here has amazing work and has giving me so much more
motivation to work on this! It helps a lot to know how helpful you all are and amazing your work is!
So here I go!
As stated, this is the biggest thing I have ever worked on, and with a lot of motive I hope to continue
with this and complete it in the next few years (yes, years)! Maybe...
Four days ago I found a file of the HulkBuster on a website (I forgot, so all credit goes to the creator
of the file) and I decided to try it. It said it was based on the Disney Infinity HulkBuster, but after
looking over the file, and photos of the HulkBuster, the file is very plain. So what I plan to do in the future
is to be able to customize it the way I want, add things, take this away, and make it my own.
Now this whole thing is one big piece, so once I get everything put together, I plan to resin all the joints
including fingers and such so they will be equal. Cut them apart for future resin and bondo. Then fix hinges
somehow to make it moveable (just for display, not wearable)
Anyhow! Here is what I have! Hope you enjoy, and I will keep posting as I continue to work on it!
So far, I have spent 30.5 hours on it and plan to keep tracking the time I spend on it. (Personal reasons)
The original file was almost 4 feet (1200mm)
Well, I didn't make it the full 11-12 feet he is, but close.
I made it 6 feet tall, so somewhat close, heh...not really.
And yes, going to be made from all paper! I'm not familiar with foam or anything like that (yet)
2.5 hours spent on just the head.
6 hours on a partial back, chest and the groin area (COD? correct me if I'm wrong please!)
6 hours on this and partial back as above
Finished up the back, I think it's turning out pretty good if I may say so myself!
Took 9 hours just to finish the back and connect the COD
(again, please correct me if that is not what it's called!)
Very plain, yes, but like I said, room for customizations and whatnot
Right now, I am working on the right leg/thigh. I have the thigh connected to the body, just no photos yet.
I have a lot of work on my hands, but I am more than willing to do the work and put all this effort into it.
Apologies for this being so long, I am quite nervous putting this on a site for I have never done anything
like this before!
All criticism is welcome!
Thank you!
-Britt
for this is my first post on anything about my 'projects' other than Facebook. I am new to this site and
still learning things as I have spent the last nine hours maneuvering around this site.
Second I want to add that everyone on here has amazing work and has giving me so much more
motivation to work on this! It helps a lot to know how helpful you all are and amazing your work is!
So here I go!
As stated, this is the biggest thing I have ever worked on, and with a lot of motive I hope to continue
with this and complete it in the next few years (yes, years)! Maybe...
Four days ago I found a file of the HulkBuster on a website (I forgot, so all credit goes to the creator
of the file) and I decided to try it. It said it was based on the Disney Infinity HulkBuster, but after
looking over the file, and photos of the HulkBuster, the file is very plain. So what I plan to do in the future
is to be able to customize it the way I want, add things, take this away, and make it my own.
Now this whole thing is one big piece, so once I get everything put together, I plan to resin all the joints
including fingers and such so they will be equal. Cut them apart for future resin and bondo. Then fix hinges
somehow to make it moveable (just for display, not wearable)
Anyhow! Here is what I have! Hope you enjoy, and I will keep posting as I continue to work on it!
So far, I have spent 30.5 hours on it and plan to keep tracking the time I spend on it. (Personal reasons)
The original file was almost 4 feet (1200mm)
Well, I didn't make it the full 11-12 feet he is, but close.
I made it 6 feet tall, so somewhat close, heh...not really.
And yes, going to be made from all paper! I'm not familiar with foam or anything like that (yet)
2.5 hours spent on just the head.
6 hours on a partial back, chest and the groin area (COD? correct me if I'm wrong please!)
6 hours on this and partial back as above
Finished up the back, I think it's turning out pretty good if I may say so myself!
Took 9 hours just to finish the back and connect the COD
(again, please correct me if that is not what it's called!)
Very plain, yes, but like I said, room for customizations and whatnot
Right now, I am working on the right leg/thigh. I have the thigh connected to the body, just no photos yet.
I have a lot of work on my hands, but I am more than willing to do the work and put all this effort into it.
Apologies for this being so long, I am quite nervous putting this on a site for I have never done anything
like this before!
All criticism is welcome!
Thank you!
-Britt