SRS99-S5 AM Sniper Rifle Build

Status
Not open for further replies.

IRanWitScissors

New Member
With the weather currently still bad here and having my printers just sitting there, figured I'd start the next build as well. I don't plan on painting and finishing this one for a while so I can finish my MA5D and armor. We'll see what happens but for now this is just a fun brag post that I'll update later.

I got the model from Oddworks and I was honestly just wanting to see what the scale/size would be so I printed the barrel assembly.
PXL_20221108_012652761.jpg


Of course I thought it was awesome and wanted to see what the approximate entire length was so back to the printer.
This pic has an extra barrel piece that I was testing to see if I wanted to cheat and make it full length to actual scale. It was definitely too much to handle at the 64in so I left it at the scaling that the model was designed at which I think was ~56in. I'll measure it later to confirm.
PXL_20221120_005816816.jpg


Then why the heck not? Back to the printer for more parts!
PXL_20221123_180414078.jpg


Here is the full spread of everything before I assembled it. Most printed very easy, 2 or 3 were a pain to remove supports from.
PXL_20221125_193804026.jpg


And here is it assembled, no sanding or finishing yet. Banana for scale
PXL_20221125_230919165.jpg


PXL_20221125_231434925.jpg


PXL_20221128_042525844.jpg
 
I just got mine in. I just need to put it together, sand, and paint mine too.
 

Attachments

  • ACCB6B0A-0952-475F-901C-B20B6EDDFC2A.jpeg
    ACCB6B0A-0952-475F-901C-B20B6EDDFC2A.jpeg
    1.1 MB · Views: 81
  • C2FE3B13-C13F-4DED-ABF3-2FA940723097.jpeg
    C2FE3B13-C13F-4DED-ABF3-2FA940723097.jpeg
    609.2 KB · Views: 83
Status
Not open for further replies.
Back
Top