TH3 FETT MAN
Well-Known Member
Hey everyone,
This is a tutorial on how to fix a XBOX 360 mic if its not connecting when you plug it in. I understand you can go buy a new one for 20-30$ but I don't have any money( no job ). This is for anyone who just wants to fix their mic for free because most people might have the supplies already. So please no harsh comments I just wanted to help
-WHAT YOU'LL NEED-
Soldering Iron
Solder
a long wire
electrical tape
razor blade or X-Acto knife
First cut the rubber casing off.
Then cut the plastic cover off.
Check which wires are broken, the little blue one was broke on mine but it could be the white or both.
Splice in the wire a little down the wire.
Now get your wire and strip the ends.
Now solder the wire to the corresponding spot.
Then solder the wire to the spliced wire.
It should be like this( If the wire is longer then you need remember to cut it down to size )
now to secure the wire in place. You don't want to wrap the whole thing with tape because it wont be as flexible.
Update-
Ok I just made a quick tutorial if your mic is connecting but you cant hear and/or talk.
-WHAT YOU'LL NEED-
small flat head screwdriver
soldering iron
solder
electrical tape
First remove the padding
then push the 3 pins in.
then check the blue and green wires to see if their broke.
If not then remove the black heat shrink
Then check and see if those wires under the heat shrink are broke or loose
If none or broke or loose then you'll have to go to my first tutorial
Then solder what needs to be soldered and then wrap some electrical tape on it.
And now reassemble and your done.
I hope this helps. This does work just let me know what you think
Thanks,
Th3 FETT MAN
This is a tutorial on how to fix a XBOX 360 mic if its not connecting when you plug it in. I understand you can go buy a new one for 20-30$ but I don't have any money( no job ). This is for anyone who just wants to fix their mic for free because most people might have the supplies already. So please no harsh comments I just wanted to help
-WHAT YOU'LL NEED-
Soldering Iron
Solder
a long wire
electrical tape
razor blade or X-Acto knife
First cut the rubber casing off.
Then cut the plastic cover off.
Check which wires are broken, the little blue one was broke on mine but it could be the white or both.
Splice in the wire a little down the wire.
Now get your wire and strip the ends.
Now solder the wire to the corresponding spot.
Then solder the wire to the spliced wire.
It should be like this( If the wire is longer then you need remember to cut it down to size )
now to secure the wire in place. You don't want to wrap the whole thing with tape because it wont be as flexible.
Update-
Ok I just made a quick tutorial if your mic is connecting but you cant hear and/or talk.
-WHAT YOU'LL NEED-
small flat head screwdriver
soldering iron
solder
electrical tape
First remove the padding
then push the 3 pins in.
then check the blue and green wires to see if their broke.
If not then remove the black heat shrink
Then check and see if those wires under the heat shrink are broke or loose
If none or broke or loose then you'll have to go to my first tutorial
Then solder what needs to be soldered and then wrap some electrical tape on it.
And now reassemble and your done.
I hope this helps. This does work just let me know what you think
Thanks,
Th3 FETT MAN