1st build masterchief 3d halo 4 + undersuit

Status
Not open for further replies.

405caveman

New Member
Hello everyone from Spain, the first thing to thank Halo 4/5 master chief armor high poly 3d printeble for you! For his design and his perfect work I have been printing the Master Chief's armor in 3d for more than a year, my printer is an anycubic mega x, it is my first job in 3d and it has not been easy, I already have almost everything printed and I am starting to paint the pieces, thanks for all the advice, tutorials and other help from the great creators here, I hope to be up to the task.

I have finished the boots and here they are I hope you like them

Tank you

translated by Google
 

Attachments

  • IMG_20211216_194932.jpg
    IMG_20211216_194932.jpg
    4.4 MB · Views: 269
  • IMG_20211216_195124.jpg
    IMG_20211216_195124.jpg
    2.7 MB · Views: 298
  • IMG_20211216_194042.jpg
    IMG_20211216_194042.jpg
    4.6 MB · Views: 251
  • IMG_20211216_194504.jpg
    IMG_20211216_194504.jpg
    4.1 MB · Views: 276
Hello, I have had to change my work system to move faster or at least try.
First I finished sanding all the printed parts, I gave the primer to all the parts and a coat of matte black paint to all the parts, I have prepared the helmet and now I only have to paint everything except the clear rifle in green
 

Attachments

  • IMG_20220216_210842.jpg
    IMG_20220216_210842.jpg
    3.5 MB · Views: 170
  • IMG-20220209-WA0016.jpeg
    IMG-20220209-WA0016.jpeg
    1.1 MB · Views: 173
  • IMG_20220216_210830.jpg
    IMG_20220216_210830.jpg
    3.2 MB · Views: 155
  • IMG_20220215_210331.jpg
    IMG_20220215_210331.jpg
    3.3 MB · Views: 186
  • IMG_20220131_215651.jpg
    IMG_20220131_215651.jpg
    3.4 MB · Views: 162
Hello, I have painted the details in dark green and I have shading with the airbrush, now only a matte gloss layer and the chrome damage are missing
 

Attachments

  • IMG_20220220_212706.jpg
    IMG_20220220_212706.jpg
    4.1 MB · Views: 135
  • IMG_20220220_212714.jpg
    IMG_20220220_212714.jpg
    4 MB · Views: 130
  • IMG_20220220_212726.jpg
    IMG_20220220_212726.jpg
    4.4 MB · Views: 129
  • IMG_20220220_212721.jpg
    IMG_20220220_212721.jpg
    4.1 MB · Views: 143
Hello, Thank you very much for the support, I have finished the helmet and I have little left to paint the rest of the armor, unfortunately until after April 3 there will be no more progress, I am late and in a month I have a local convention of Cosplay, later I will upload the rest of the photos and how I thermoformed the visor and how I painted it, thanks and see you soon
 

Attachments

  • IMG_20220227_214701.jpg
    IMG_20220227_214701.jpg
    4.2 MB · Views: 131
  • IMG_20220224_171525.jpg
    IMG_20220224_171525.jpg
    4.4 MB · Views: 123
Hello, I finished the local comic con, thank this great community, if I have been able to make this great suit it has been thanks to all the information here, thank you very much, soon I will publish more information about the rest of the suit and the improvements that I will make at
 

Attachments

  • IMG_20220403_234114.jpg
    IMG_20220403_234114.jpg
    584.5 KB · Views: 191
  • IMG_20220403_233446.jpg
    IMG_20220403_233446.jpg
    326.8 KB · Views: 225
  • IMG-20220402-WA0039.jpg
    IMG-20220402-WA0039.jpg
    440.1 KB · Views: 199
Hola, ya estamos de vuelta, despues de pasar un infierno con la movilidad de mi traje me he puesto a hacer unas modificaciones, le he hecho la parte superior del pie y la rodilla en espuma y las he subido un poco mas pequenas, le he hecho el cuerpo en foam y detalles impresos en 3D, espero un resultado
 

Attachments

  • IMG_20220505_202413.jpg
    IMG_20220505_202413.jpg
    1.2 MB · Views: 98
  • IMG_20220511_214309.jpg
    IMG_20220511_214309.jpg
    7.9 MB · Views: 102
  • IMG_20220511_214402.jpg
    IMG_20220511_214402.jpg
    2.8 MB · Views: 117
  • IMG_20220512_102736.jpg
    IMG_20220512_102736.jpg
    1.4 MB · Views: 100
Hello again, today I teach you in a small tutorial without words, how I paint my armor, in case it helps someone, thanks
 

Attachments

  • IMG_20220517_231624.jpg
    IMG_20220517_231624.jpg
    1.8 MB · Views: 121
  • IMG_20220517_231650.jpg
    IMG_20220517_231650.jpg
    1.5 MB · Views: 110
  • IMG_20220517_231915.jpg
    IMG_20220517_231915.jpg
    1.7 MB · Views: 116
  • IMG_20220517_224253.jpg
    IMG_20220517_224253.jpg
    3.2 MB · Views: 113
  • IMG_20220517_231721.jpg
    IMG_20220517_231721.jpg
    1.6 MB · Views: 111
  • IMG_20220517_231843.jpg
    IMG_20220517_231843.jpg
    1.7 MB · Views: 110
  • IMG_20220517_231811.jpg
    IMG_20220517_231811.jpg
    1.8 MB · Views: 105
  • IMG_20220517_223707.jpg
    IMG_20220517_223707.jpg
    3.1 MB · Views: 113
Hello, today I show you how I sand the joints of the 3d pieces, this is my system, it is not the best but it is the one that makes less dust, so I try to reduce the need to use bondo, I hope it helps you, thanks
 
Hello, I have made the part of the inner ankle suit again, it is made of thermoformed Foam with a hexagonal pattern, which I shape myself with a mold that I printed in 3d with PLA glued to a board, I use 5mm gray Foam and then I paint it with black spray and give it some chrome reflections with a brush, I glue the pieces to an elastic band with hot glue and close with velcro, I have tried to make it look like the visual references, I have not done the entire ankle why there is no space betwee
IMG_20220609_231454.jpg
IMG_20220609_233454.jpg
n the armor and my body, I hope you like it, I remember that this has been translated by Google
IMG_20220609_223451.jpg
IMG_20220609_223502.jpg
IMG_20220609_234111.jpg
IMG_20220609_231234.jpg
IMG_20220609_225019.jpg
the new and the old
IMG_20220609_232118.jpg


 
hello again, I have put the new upper pieces of the boots made in Foam and with a smaller size than the original 3d printed ones, to try to gain mobility, I have also removed some velcro that held the upper pieces and now they are loose, I hope with this gain more movement, thanks
 

Attachments

  • IMG_20220719_215152.jpg
    IMG_20220719_215152.jpg
    6 MB · Views: 100
  • IMG_20220719_215416.jpg
    IMG_20220719_215416.jpg
    5.6 MB · Views: 85
  • IMG_20220719_215426.jpg
    IMG_20220719_215426.jpg
    5.6 MB · Views: 76
  • IMG_20220719_220505.jpg
    IMG_20220719_220505.jpg
    5.5 MB · Views: 84
  • IMG_20220719_221400.jpg
    IMG_20220719_221400.jpg
    5.7 MB · Views: 85
Hello, I have also modified my 3d printed rifle.
IMG_20220720_190918.jpg
IMG_20220720_190844.jpg
I have changed the meter that was a sticker for a light meter, I have to say that electricity is not my forte and I always used small flashlights to solve the problem, in this case cut out the counter and printed a new counter frame and digital counter template
IMG_20220626_203102.jpg
, after dremeling out the battery hole, I popped in a mini bike light
IMG_20220720_190054.jpg
, and put a little button on the right hand side, and the cover with a piece of blue tinted methacrylate, looks pretty good even in the sun
IMG_20220720_190749.jpg
, thanks
 

Attachments

  • IMG_20220720_190500.jpg
    IMG_20220720_190500.jpg
    2.4 MB · Views: 74
  • IMG_20220720_190544.jpg
    IMG_20220720_190544.jpg
    2.1 MB · Views: 79
  • IMG_20220720_190619.jpg
    IMG_20220720_190619.jpg
    2.7 MB · Views: 74
  • IMG_20220720_190648.jpg
    IMG_20220720_190648.jpg
    1.5 MB · Views: 78
  • IMG_20220720_190720.jpg
    IMG_20220720_190720.jpg
    2.7 MB · Views: 74
  • IMG_20220720_190817.jpg
    IMG_20220720_190817.jpg
    2.9 MB · Views: 75
Status
Not open for further replies.
Back
Top