1st Build Bella’s SB ODST build.


QueenBHartigan

New Member
I’m expecting decals to be arriving from next week. As per screen accuracy. I’m adding


“MK117” in white on the right black portion of the chest plate
A UNSC logo in black on the right side of the chest plate wing.
UNSC in white at the bottom of the chest plate
“BELLA” in white on the name section

here’s a rough edit of what that will look like.
View attachment 304521
A further addition recently has been the toe caps, which are now fitted to the boots. They’re attached by a 22” strap that runs from the toe cap, round the back of the boot, and attaches to the other side of the toe cap.
 

Attachments

  • 3B81B2C1-58EC-4789-8B76-C1278D6A6A89.jpeg
    3B81B2C1-58EC-4789-8B76-C1278D6A6A89.jpeg
    2.3 MB · Views: 11
  • BE581665-40B6-48D8-A9F8-A7B00B1B9FC8.jpeg
    BE581665-40B6-48D8-A9F8-A7B00B1B9FC8.jpeg
    2.4 MB · Views: 11
  • D18009AD-2388-476B-93C4-60DFD626A317.jpeg
    D18009AD-2388-476B-93C4-60DFD626A317.jpeg
    2.6 MB · Views: 11

QueenBHartigan

New Member
Another quick update:

My chest plate cured and is nice and dirty again! Decals are arriving from Monday!
View attachment 304568
A suit up was in order earlier to asses the progression of the suit. Fixing those two buckles has already made my costume look even better. I mainly wanted to see how i moved. I move about the speed of a stormtrooper, and I’m incredibly noisy about it too. It’s due to the D Rings present on the belt.
 

Attachments

  • D6F2FEAF-A568-4D80-949C-EF2DBBD9838B.jpeg
    D6F2FEAF-A568-4D80-949C-EF2DBBD9838B.jpeg
    1,002.9 KB · Views: 24
  • 9B78C593-6790-4A25-8EBB-25EF68BF4DF4.jpeg
    9B78C593-6790-4A25-8EBB-25EF68BF4DF4.jpeg
    777.6 KB · Views: 20
  • C93BC3B5-3083-46B5-9992-83EB71066445.jpeg
    C93BC3B5-3083-46B5-9992-83EB71066445.jpeg
    1.3 MB · Views: 15
  • 7D6FB76B-8751-4FA4-BDE7-58FE99959FEC.jpeg
    7D6FB76B-8751-4FA4-BDE7-58FE99959FEC.jpeg
    964.9 KB · Views: 18
  • 6A36B56D-8E09-4A34-AC24-9A9EC1980AE9.jpeg
    6A36B56D-8E09-4A34-AC24-9A9EC1980AE9.jpeg
    1.8 MB · Views: 16
  • 307FBEEE-42DB-4B8A-8931-B6A369106464.jpeg
    307FBEEE-42DB-4B8A-8931-B6A369106464.jpeg
    2.1 MB · Views: 17
  • DBFCDDB7-6FD5-498A-BC25-8B13D1D40A1C.jpeg
    DBFCDDB7-6FD5-498A-BC25-8B13D1D40A1C.jpeg
    1.1 MB · Views: 24

QueenBHartigan

New Member
A suit up was in order earlier to asses the progression of the suit. Fixing those two buckles has already made my costume look even better. I mainly wanted to see how i moved. I move about the speed of a stormtrooper, and I’m incredibly noisy about it too. It’s due to the D Rings present on the belt.
I came across a post this morning from Deviss65 on their ODST repaint. And they mentioned that they used a kind of tint spray that gives a mirror effect on the surface sprayed.
I HAD to try this.
So 1 DIY store trip later and I return with Rustoleum Mirrored Effect in a spray can. Dries in ten minutes and I was told to go light. In fact, incredibly light.

I removed my visor (slightly damaging it in the process, but hey, you learn from your mistakes) and got it outside for spraying. While that cured; I came back in to hollow out the vents on my helmet and place some mesh inside them, to allow some airflow.
Here’s my results. Safe to say I’m chuffed.
B3BC6204-BB65-4CEE-87F7-7D9BEBCFD4A8.jpeg
 

Attachments

  • 7BEC567D-13BA-416B-B58E-A42B8B745F5B.jpeg
    7BEC567D-13BA-416B-B58E-A42B8B745F5B.jpeg
    1.7 MB · Views: 8
  • 7F76BF82-717A-4E24-B50B-4FF19AD246FE.jpeg
    7F76BF82-717A-4E24-B50B-4FF19AD246FE.jpeg
    1.4 MB · Views: 9

spitzkitz

Jr Member
I came across a post this morning from Deviss65 on their ODST repaint. And they mentioned that they used a kind of tint spray that gives a mirror effect on the surface sprayed.
I HAD to try this.
So 1 DIY store trip later and I return with Rustoleum Mirrored Effect in a spray can. Dries in ten minutes and I was told to go light. In fact, incredibly light.

I removed my visor (slightly damaging it in the process, but hey, you learn from your mistakes) and got it outside for spraying. While that cured; I came back in to hollow out the vents on my helmet and place some mesh inside them, to allow some airflow.
Here’s my results. Safe to say I’m chuffed.

If I may ask, did you spray on the inside or the outside of the visor?
 

Sierra Charlie

New Member
I came across a post this morning from Deviss65 on their ODST repaint. And they mentioned that they used a kind of tint spray that gives a mirror effect on the surface sprayed.
I HAD to try this.
So 1 DIY store trip later and I return with Rustoleum Mirrored Effect in a spray can. Dries in ten minutes and I was told to go light. In fact, incredibly light.

I removed my visor (slightly damaging it in the process, but hey, you learn from your mistakes) and got it outside for spraying. While that cured; I came back in to hollow out the vents on my helmet and place some mesh inside them, to allow some airflow.
Here’s my results. Safe to say I’m chuffed. View attachment 304627
I really like how your helmet came out! I want to do the same thing, except blue line
 

Your message may be considered spam for the following reasons:

  1. Your new thread title is very short, and likely is unhelpful.
  2. Your reply is very short and likely does not add anything to the thread.
  3. Your reply is very long and likely does not add anything to the thread.
  4. It is very likely that it does not need any further discussion and thus bumping it serves no purpose.
  5. Your message is mostly quotes or spoilers.
  6. Your reply has occurred very quickly after a previous reply and likely does not add anything to the thread.
  7. This thread is locked.
Top