Kingdom Hearts- Terra's Linger Will Armor - 3D Printable

Status
Not open for further replies.

shadowbreakre

Member
After many, many setbacks, here it is Finally! 3D printable Terra's Lingering Will Armor from Kingdom Hearts!


Like the Aqua's armor I only did the rigid plating. other parts of the armor such as the sides and boots will still need to be made out of foam as these pieces need to be flexible or form fitting.

It was rough trying to get this one done. With everything I 've been having to go through an deal with I been finding it really hard to work on anything but I know a lit of people have been looking forward to this one. So I decided to crack down and grind it out the past few hours. You may note some slight quality difference between pieces as my Zbrush license expired between now and when I last worked on it. it wont really be noticeable once is printed however.

tbrender.jpg
tbrender_001.jpg

tbrender_002.jpg
tbrender_003.jpg
 
Update 1/22/2022: based on feed back I have remade the helmet and visor as well as created a visor buck for vac forming.
 
Helmet is printed and about half way done. I plan on Vac Forming the Visor this weekend. Chest plating is printed out as well, next Illl start printing the arms and shoulders.

I custom ordered an undersuit but I have no idea when I'll get it. I hope it's before the KH20 anniversary convention here in Austin on march 25th.


IMG_3075.jpg
IMG_3076.jpg
 
Posted this a few days ago in the discord but forgot to update it here. So far what I have printed and what's finished. All that's left to print is the leg pieces. Visor is vacuum formed and ready to be dyed. Got an update on the custom undersuit and it should be ready by the 10th. other than the printed parts there are some pieces that that i need to make out of foam as well as the make the cape.

Right now though all my printers are crapped out. I've kinda given up hope on fixing the Chiron and cannibalized it to fix the Mega X. Still need to get a new hot end for it as well as a new one for my Sovol sv03. Just hoping I can get the rest of the parts printed and done by the Kingdom hearts 20th atx event March 25th. Would like to get the keyblade printed as well but I don't think that will happen before the con.

274705240_4858539650865822_5647622263918533002_n.jpg

274318438_4858539620865825_3683941563085442674_n.jpg

 
3/4th of the armor is printed, sanded, and ready to paint. Still have part of the legs left to make. hopefully of i can get the rest of this printed by Thursday then I'll be able to start on the keyblade.

 
Looks good so far. But is there a reason why you decided to print the torso armor in 3d? I thought foam would be the best choice for that section for better movement?
 
Looks good so far. But is there a reason why you decided to print the torso armor in 3d? I thought foam would be the best choice for that section for better movement?
Because the plating is supposed to be rigid and not flexible. The torso is 4 separate plates that overlap and slide over one another as I bend which lets me move freely, the same as foam. The plates are also thin, foam would warp and bend too much and throw of the symmetry. The boots and sides of the armor however, will be foam as these parts need to bend.
 
I'm just afraid of the paint job being scratched. But if you figured out how to make it work, good luck to your progress.
 
I’m very grateful you decided to share the files with us! Thank you for your effort and I love how it turned out!

A couple of questions.
Where did you get the custom undersuit? I’d like to purchase one myself.
And what paint colors did you use for the outfit.

Thank you very much!
 
I’m very grateful you decided to share the files with us! Thank you for your effort and I love how it turned out!

A couple of questions.
Where did you get the custom undersuit? I’d like to purchase one myself.
And what paint colors did you use for the outfit.

Thank you very much!
I'll dm you the info about the suit.
as for the colors, I used metallic gold and red chrome spray paint, then a matte finish
 
Went to RTX Austin this weekend and got to wear my armor again. I also finished the Ends of the Earth keyblade. The even was So much fun. I got stuck in one place for close to an hour just getting pictures taken with me. I also got to take pictures with Blaine and Jack from Rooster Teeth.


290541100_534277298384211_4016096631487111466_n.jpg

290382765_510870147391912_2235171627315415104_n.jpg
290819897_1092966384626060_6096820335720439951_n.jpg
290469592_1043702159605471_4357588494912051498_n.jpg
290156865_1929316533930440_9058901549472152103_n.jpg
290125473_775244367179479_6255523366620074180_n.jpg
289875932_789783988681563_6310530359040764908_n.jpg
289742983_716769529551937_7631678645509709589_n.jpg
289948170_1148823359017506_4630350539754185892_n.jpg
289950069_993211331394249_4608597947426041596_n.jpg
289780465_583603596663143_5191118941236211977_n.jpg
289768959_451546386404429_2726473195616569708_n.jpg
290897515_1911022055756598_563409652485156034_n.jpg
 

Attachments

  • 290188735_1440142999746395_2811232725525072545_n.jpg
    290188735_1440142999746395_2811232725525072545_n.jpg
    361.7 KB · Views: 166
Status
Not open for further replies.
Back
Top