My Arizona themed ODST

CherriDragon

Member
Member DIN
S919
I decided on waiting before continuing my Locus print. Instead I will be working an ODST suit. Im using the armor I found in an art which consists of a Helljumper Helmet & Vigilant Armor. My goal is to use the “textured” sand spray paint for the armor. I also plan on adding some Arizona art from around my childhood home. The visor I will either make a red or purple to mimic the Arizona sunset. I cant wait to work on it! For now enjoy the parts Ive printed (minis) to see what supports would be best
 

Attachments

  • 59149FCC-90D1-44B6-9482-8EABF5101264.jpeg
    59149FCC-90D1-44B6-9482-8EABF5101264.jpeg
    2.2 MB · Views: 71
  • 479A492B-44E0-4069-B160-601B7A86DA9C.jpeg
    479A492B-44E0-4069-B160-601B7A86DA9C.jpeg
    1.9 MB · Views: 79
  • 5040FD6E-8363-48E8-B6F7-3ADB7C570033.jpeg
    5040FD6E-8363-48E8-B6F7-3ADB7C570033.jpeg
    2.8 MB · Views: 84
  • D2A1E001-5C40-4FDF-89C2-EC846F8C4194.png
    D2A1E001-5C40-4FDF-89C2-EC846F8C4194.png
    8.5 MB · Views: 72
  • 15FCBB8F-6F37-460F-A2F3-A1B857EB99F9.jpeg
    15FCBB8F-6F37-460F-A2F3-A1B857EB99F9.jpeg
    2.9 MB · Views: 70
This will be so cool, the Arizona flag is definitely one of my favorite state flags (besides Colorado, of course!) and using its colors and Arizona art will be super unique. My dad grew up in Arizona too, so I definitely grew up around a lot of its iconography.

1668921430262.png
 
I did a mini helmet and spray painted using Textured Spray paint, Matte Clear Coat, and the black was supposed to be clear lacquer but apparently was black. Kinda looks cool though. Was impatient so much of the paint did not fully stick
 

Attachments

  • IMG_3113.JPG
    IMG_3113.JPG
    1.5 MB · Views: 53
  • IMG_3114.JPG
    IMG_3114.JPG
    1.8 MB · Views: 53
  • IMG_3115.JPG
    IMG_3115.JPG
    1.7 MB · Views: 61
These are all using MoeSizzlac's Thingiverse files for Buck's Halo 5 Helljumper Helmet and Jun's Noble 3 Halo Reach armor.

The rings were sizing holes for the arms and the black are for the shin. All fit well but I've decided to try and switch the armor set to the ODST armor for better luck with other items. Again another one of Moe's beautiful files!

Going on with the helmet pieces

#1 - Helmet piece attempt with estimate measurements, even cuts
#2 - Properly sized and cut with help of D3LTA, printed vertical at a 45 degree angle
#3 - Attempt 2 at Vertical
#4 - Attempt 3 at Vertical
Not numbered/#5 - Cut neck piece in half, printed flat vertical

Next Helmet
#1 - Back Left piece of properly fitted and cut helmet. 1 attempt, vertical

Next Piece
#1 - Vertical print, Front Left helmet, layer off, top completely off
#2 - Attempt 2, top off
#3 - Horizontal (New printer), no problems as of yet 28hrs into 45hr print

Chest
#1 - Printed with estimate measurements, no other prints done

Next updates will be with the finished left half of helmet, finished sizing of new armor
 

Attachments

  • IMG_3112.JPG
    IMG_3112.JPG
    1.9 MB · Views: 49
  • IMG_3111.JPG
    IMG_3111.JPG
    2.9 MB · Views: 53
  • IMG_3109.JPG
    IMG_3109.JPG
    1.5 MB · Views: 59
  • IMG_3106.JPG
    IMG_3106.JPG
    1.1 MB · Views: 50
  • IMG_3105.JPG
    IMG_3105.JPG
    1.8 MB · Views: 61
  • IMG_3104.JPG
    IMG_3104.JPG
    1.9 MB · Views: 64
  • IMG_3110.JPG
    IMG_3110.JPG
    1.6 MB · Views: 61
  • IMG_3101.JPG
    IMG_3101.JPG
    2.3 MB · Views: 47
  • IMG_3103.JPG
    IMG_3103.JPG
    2.2 MB · Views: 46
  • IMG_3102.JPG
    IMG_3102.JPG
    2.2 MB · Views: 50
  • IMG_3107.JPG
    IMG_3107.JPG
    2.2 MB · Views: 57
This will be so cool, the Arizona flag is definitely one of my favorite state flags (besides Colorado, of course!) and using its colors and Arizona art will be super unique. My dad grew up in Arizona too, so I definitely grew up around a lot of its iconography.

View attachment 325636
OOO I didn't think about incorporating the flag into somewhere on the armor
 
This thread is more than 10 months old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top