My Assassins Creed Hidden Blade

[d4v1dh]

hi guys this is not only my first attempt but my first post since joining your wonderfull forum.

i made the blade from a sheet of mdf and the body out of that stuff you put cables in to keep them tidy,well i best let you see some pics of it so far.

let me know what you think

 

[d4v1dh]

here is a vid of it in action, i will make a better vid later today.

 

[Bathion]

I enjoyed that thank you. Pics i was not quite understanding what your intention was but the video helped a lot.



What i enjoy most about it is the simplicity of the device.



Only suggestion is to work on making it thinner and to sand down the "blade" part so it looks more refined. Other wise nice work. Also food for thought would it be possible to be spring action?

 

[d4v1dh]

making it spring action could be posible, i will start on a seperate hidden blade with a spring, thanks for the idea mate,

 

[AlexSpartan177]

There is a pretty good indy mogul video that shows you how to make a spring blade.

I dont have the link right now, but I will try to find it.

 

[d4v1dh]

thanks mate, i look forward to it.

 

[llinformerll]

Sweet. I've been waiting for someone to do this for a while.

 

[d4v1dh]

Sweet. I've been waiting for someone to do this for a while.

you have been waiting for someone to make a hidden blade?

do you want me to do a tutorial for you?

if you do i will start tomorrow.

 

[Sniperbaas]

There is a pretty good indy mogul video that shows you how to make a spring blade.

I dont have the link right now, but I will try to find it.

Done

At least, that's the one I think you're referring to. Just but a blade in it as opposed to a pistol.





Cheers!



BTW: Nice setup, especially for only 40minutes

 

[llinformerll]

That'd be great if you'd make a tutorial. Thanks.

 

[d4v1dh]

Done

At least, that's the one I think you're referring to. Just but a blade in it as opposed to a pistol.





Cheers!



BTW: Nice setup, especially for only 40minutes

thanks mate, glad you like it.

 

[d4v1dh]

That'd be great if you'd make a tutorial. Thanks.

ok mate i will get to work on a tutorial for you

 

[tumbucu]

thats cool dude i made mine out of a tai chi sword it folded in to the handle but i cut the handle off and just used the blade part i was kinda rushing to make it for a con so i went with that till i could get the one from museum replicas ill put the links so you can see where i got the blades i used keep it up bro its looking nice



http://cgi.ebay.com/Tai-Chi-Stretch...emQQptZLH_DefaultDomain_0?hash=item3a465e42f7



http://www.museumreplicas.com/p-541-assassin-extension-knife.aspx

 

[d4v1dh]

thats cool dude i made mine out of a tai chi sword it folded in to the handle but i cut the handle off and just used the blade part i was kinda rushing to make it for a con so i went with that till i could get the one from museum replicas ill put the links so you can see where i got the blades i used keep it up bro its looking nice



http://cgi.ebay.com/Tai-Chi-Stretch...emQQptZLH_DefaultDomain_0?hash=item3a465e42f7



http://www.museumreplicas.com/p-541-assassin-extension-knife.aspx

thanks, its not bad for under an hours work.

and i will check out the links now, thanks mate

 

[LMNOspartan]

Lookin awesome dude! can't wait for the tutorial! i'm defintetly gonna make one!

 

[lordzoabar]

*fingers twitching* must get myself one of those! Maybe after I finish my build I will start on this

 

[LeeKegan]

Nice job.

 

[d4v1dh]

i will try to finnish the tutorial tonight, glad you all like it.

i made my own armoury with m4a2+m203 and a sniper rifle i also made a few other guns and swords but they wer for fun.

 

[d4v1dh]

im going to start posting the tutorial in 15 minutes so in advance i want to say sorry for the state my work area is in in the pics.

 

[d4v1dh]

here we have the wood we need to make the blade. so now measure the wood and

mark out 15 inch peice and cut it. it must be wide enough that it doesnt move

about to freely in the tube but not so much that it wont slide.

next we have the plastic that you put electrical wires in to keep them tidy

another pic of the plastic

and my fave tool

now measure the tube and mark out 13 inch peice and cut it

it should look like this

now here is a pics of the blade

now back to the tube, mark a line on the top of the tube

now cut out the line that you marked

you should now have something like this

now slide the blade into the tube and using a pen or marker put a dot on the

blade where you will put a screw to stop it sliding out to far

this is how the screw is placed

this is were you put the screw on the blade



hope this helps, will try and do a better one when i have more time