Skyrim Pepakura Files

Discussion in 'Non-Halo Costumes and Props' started by zombiegrimm, Apr 27, 2012.

  1. Azu

    Azu New Member

    Trophy Points:
    3
    Hey, Zombiegrimm! I just wanted to say how much i appreciate all your efforts and work that you've done working on this pep files. Thank you, good sir!
    By the way, here is my almost finished orcish dagger built from your .pdo file.

    I was wondering if you could do unfold for Blade of Woe and/or some elven weapons, because i can't find these anywhere.
    Rg4e9BhME_4.jpg cafaeC8-nos.jpg
     
  2. zombiegrimm

    zombiegrimm Active Member

    Trophy Points:
    230
    I love seeing what everyone creates. The handful of items I've received have been beyond amazing! I show them off and give credit when I'm on panels. I truly have the best fans!!!

    I have always said I wouldn't do this. I promised myself I wouldn't because I knew the deep undertaking it required, and I didn't think I could do it.

    However, with my skills having progressed further than I anticipated, I will be taking back the previous statement. I will be working on the Elven files! They aren't as clean as the other Skyrim models, with huge holes and uneven lines, which makes unfolding extremely difficult. I have the skills now to be able to try and repair the models before unfolding them. This batch might take a little longer than usual, but I'm starting the Elven weapon set.
     
  3. PerniciousDuke

    PerniciousDuke RXO & BCO 405th Regiment Officer Community Staff

    Trophy Points:
    1,085
    ...make you something... why didn't I think of that?!?!

    I'll be starting on the male nightingale armor in about a month. I'd like to make you something too. I can't afford to make you a whole suit, but if you could have one (reasonably-sized) weapon or one piece of armor... what would you want?
     
  4. TurboCharizard

    TurboCharizard RMO & BCO 405th Regiment Officer Community Staff

    Trophy Points:
    1,085
    Build Buds Mk.II?
     
    Lieutenant Jaku likes this.
  5. zombiegrimm

    zombiegrimm Active Member

    Trophy Points:
    230
    You guys, are the best!

    I require only one thing from my fans and its the same thing I will always want. Credit for the file. You build it, its your work of art. I love everything and cherish whatever gets made.
     
    Sean Anwalt likes this.
  6. Benton188

    Benton188 Well-Known Member

    Trophy Points:
    765
    I will always give you credit for the work you've done. I realized I never shared my dragon set I made either. I admit it doesn't look the greatest, needs more detail work and a better paint scheme.
    CIMG5806.JPG
     
  7. zombiegrimm

    zombiegrimm Active Member

    Trophy Points:
    230
    I love the hard work I see. If you're unhappy with it, that's on you, but I enjoy everything that is made. I, personally, enjoy swords, daggers, and helmets. Those are my jam and honestly love receiving weapons of such fine craftsmanship that I would swear it was made by dwarves!
     
  8. PerniciousDuke

    PerniciousDuke RXO & BCO 405th Regiment Officer Community Staff

    Trophy Points:
    1,085
    Completely unrelated question zombie... how big is your head..?

    edit: like if you were to put your head in a box what would the three dimensions of the box need to be to be able to cover your chin
     
    Last edited: Oct 3, 2018
  9. zombiegrimm

    zombiegrimm Active Member

    Trophy Points:
    230
    Ok, unrelated answer. Pizza.

    My face is about 11 inches tall from chin to top of my skull. That's snuggly at best so maybe 12 inches. From nose to back of skull is about 10 inches. About 9 inches wide. Snuggly is a word, I swear.
     
  10. zombiegrimm

    zombiegrimm Active Member

    Trophy Points:
    230
    When unfolding these broken parts for the Elven weapons, which would you prefer... the files to be released as they are with the broken parts, or would you like me to attempt to clean up those broken parts as best as I can?
     
  11. Sean Anwalt

    Sean Anwalt RCO 405th Regiment Officer

    Trophy Points:
    1,035
    I am sorry to keep you in suspense for so long. In my opinion, I think it best to have the full, un broken models. It will save confusion, heartache, and n00bies (like me) in the future saying "What am I supposed to do?! Will you do this for me?!?" and etc...
     
  12. zombiegrimm

    zombiegrimm Active Member

    Trophy Points:
    230
    Hello once again Skyrim fans! I have the Elven weapons ready to go for you as a Xmas gift! I had surgery yesterday so I'm super out of it. However, I should be good in a day or two and you will have access to those files before the end of the year. You guys have absolutely been the best fans, and I thank you for being on this journey with me. This journey isnt over yet, so I'm looking forward to more files next year. I can't wait to see what you come up with, and I love being able to hold your work. I cannot thank you enough!!

    See you in a few days!!!
     
    Sean Anwalt likes this.
  13. Sean Anwalt

    Sean Anwalt RCO 405th Regiment Officer

    Trophy Points:
    1,035
    Super duper stoked for more skyrim files! XD

    zombiegrimm your work and dedication to this is awe- inspiring. Thanks for sticking it out!
     
  14. zombiegrimm

    zombiegrimm Active Member

    Trophy Points:
    230
    Hello once again Skyrim fans!!! A late Xmas present, I have the finished Skyrim Elven weapons. I am finally able to move on my own a bit and managed to get to the computer so I can bring these gifts to you, the fans. This is the last batch of files for this year. I will be back at it next year with new files for your enjoyment. If there is something you desire to see, let me know and I will see what I can do. Requests are always appreciated, as it gives me a list to work on. Take note that the model isn't completely built, but I left all pieces so that you can see where everything goes. Enjoy!!

    Elven Battle Axe
    Measures about 48 inches.
    gSQ2XIo.png

    Download Link: Elven Battle Axe - Download - 4shared

    Elven Bow
    Measures about 48 inches.
    00WVKdE.png

    Download Link: Elven Bow - Download - 4shared

    Elven Dagger
    Measures about 18 inches.
    Fic4njC.png

    Download Link: Elven Dagger - Download - 4shared

    Elven Greatsword
    Measures about 60 inches.
    GKo1kmO.png

    Download Link: Elven Greatsword - Download - 4shared

    Elven Mace
    Measures about 36 inches.
    fRFD5D5.png

    Download Link: Elven Mace - Download - 4shared

    Elven Sword
    Measures about 48 inches.
    mlGaFlP.png

    Download Link: Elven Sword - Download - 4shared

    Elven War Axe
    Measures about 28 inches
    RBGzObs.png

    Download Link: Elven War Axe - Download - 4shared

    Elven War Hammer
    Measures about 54 inches.
    KqjyJMU.png

    Download Link: Elven War Hammer - Download - 4shared
     
    Sean Anwalt and PerniciousDuke like this.

Share This Page