Soullesssin's Armor Progress
- Thread starter scandomfo
- Start date
- Status
scandomfo
Well-Known Member
@Shade
I doubt I'll play today since I gotta clean my room and do hw.
Buttt I will maybe play for an hour?
@Pooper
Lol I make good progress when anyone s gone
Idk if it will make it hotter inside the helmet. Though that's what the vents are for
Haha whats your gamertag pooper?
@Mks81
Haha thanks
-------------------------
Today I will be finishing putting together my helm and chest.
Gotta do some stuff and hoping it'll turn out great
By the way, Hero aka MrOreo is coming by my house today and we are going to glass his mother mold shin thing!
So I hope that turns out nice too
UPDATE:
Haha I get a few achievements for ODST so that took some of my time
But I didn't want to watch paint dry either
I blackened some areas that was hard to do beforehand.
I fixed some things that had gray and my horrible masking skills picked up.
Ummm I tried to see how I would apply my halo emblem to my Bicep.
It's definitely possible but I gotta do some cutting.
I doubt I'll play today since I gotta clean my room and do hw.
Buttt I will maybe play for an hour?
@Pooper
Lol I make good progress when anyone s gone
Idk if it will make it hotter inside the helmet. Though that's what the vents are for
Haha whats your gamertag pooper?
@Mks81
Haha thanks
-------------------------
Today I will be finishing putting together my helm and chest.
Gotta do some stuff and hoping it'll turn out great
By the way, Hero aka MrOreo is coming by my house today and we are going to glass his mother mold shin thing!
So I hope that turns out nice too
UPDATE:
Haha I get a few achievements for ODST so that took some of my time
But I didn't want to watch paint dry either
I blackened some areas that was hard to do beforehand.
I fixed some things that had gray and my horrible masking skills picked up.
Ummm I tried to see how I would apply my halo emblem to my Bicep.
It's definitely possible but I gotta do some cutting.
scandomfo
Well-Known Member
@Iren00
Thanks
Update: Haha finally the 405th is back up! Now I can post up my new updates since it's been off for so long.
But for starters, I will just do the Handplates to give the anticipation of what I done this passed weekend.
I have gotten a cast from MrOreo about last week and haven't got a chance to work on it. Now with a bit of
sanding to it, it looks like a beauty
I still gotta sand it abit more on the unpainted one then I'm all set!
Though I still gotta get a shin pull from him. Hopefully they will be equally as awesome as the HP's
Thanks
Update: Haha finally the 405th is back up! Now I can post up my new updates since it's been off for so long.
But for starters, I will just do the Handplates to give the anticipation of what I done this passed weekend.
I have gotten a cast from MrOreo about last week and haven't got a chance to work on it. Now with a bit of
sanding to it, it looks like a beauty
I still gotta sand it abit more on the unpainted one then I'm all set!
Though I still gotta get a shin pull from him. Hopefully they will be equally as awesome as the HP's
scandomfo
Well-Known Member
@Hero
Haha thanks
Though I hope your shins will be even better when we work on your mold tonight!
@Pooper
Lol you can always get priority mail or fist class.
I sent MacAttack something on tues and he got it on friday.
Though you can definitely make the Halo-Ween deadline
Haha thanks
Though I hope your shins will be even better when we work on your mold tonight!
@Pooper
Lol you can always get priority mail or fist class.
I sent MacAttack something on tues and he got it on friday.
Though you can definitely make the Halo-Ween deadline
pooper said:@ Soulless: Yeah, I'm sure I'll get before Halloween.
Haven't seen you or Hero online today, so you two are probably working on the shin cast. Can't wait to see it!
I'm still at work, actually. We'll be working on the first cast in oh...4 or 5 hours, give or take.
Last edited by a moderator:
scandomfo
Well-Known Member
@Pooper + Shade
Well the silicone rubber mold didn't stick to the wall of the fiberglass mother mold case thing.
So in certain areas of the final cast, it would have a gap.
But now, we now know the reason behind it.
It was the keys! The keys didn't stay flush with the wall and the key hole.
So tonight, we now know what areas needs to be completely flush so we can get a perfect cast
Though cross your fingers guys !!
ON a side note: I got out of school early since I didn't feel so well.
I think I should work on my armor but I really need a nap.
Though I did manage to completely finish my helm with lights, pads, and etc
Well the silicone rubber mold didn't stick to the wall of the fiberglass mother mold case thing.
So in certain areas of the final cast, it would have a gap.
But now, we now know the reason behind it.
It was the keys! The keys didn't stay flush with the wall and the key hole.
So tonight, we now know what areas needs to be completely flush so we can get a perfect cast
Though cross your fingers guys !!
ON a side note: I got out of school early since I didn't feel so well.
I think I should work on my armor but I really need a nap.
Though I did manage to completely finish my helm with lights, pads, and etc
- Status
Similar threads
