Starting My Jorge Helmet

[itsmeitspb]

Hey all, I’m starting my Jorge helmet. I’ve had it for over 3 years and was put off with how rough it looked when it arrived. I have gave it a sand and now started filling. How do you all deal with rivits ect on the prints. There’s some on Jorges helmet near the visor but I don’t want to fill them in with filler. Any tips would be great!

 

[SgtSaint]

Personally - I don't do much sanding other that spot filling for defects/pits. I don't do that whole 'magic shell' of coating the entire thing approach. Some do and that's cool-just a different approach.

In the case of those rivets: Sand carefully. If you need to, you may end up sanding more than planned then have to re-engrave the rivet. Its just a circle so heating a circle punch or small diameter pipe and pressing it into the plastic will give you a new circle.

 

[itsmeitspb]

Personally - I don't do much sanding other that spot filling for defects/pits. I don't do that whole 'magic shell' of coating the entire thing approach. Some do and that's cool-just a different approach.

In the case of those rivets: Sand carefully. If you need to, you may end up sanding more than planned then have to re-engrave the rivet. Its just a circle so heating a circle punch or small diameter pipe and pressing it into the plastic will give you a new circle.

View attachment 361662

Awesome work mate!
That’s a great idea about heating a pipe. I bought the helmet from someone selling prints on eBay before I had a 3D printer, I think he had his settings to rough as I had to sand at with a mouse sander with 60 grit to help smooth it abit lol. I’ve had to pretty much coat the helmet and even abit inside. I’ll have to get a good playlist going when I start sanding to help pass the time lol.
Really appreciate the help matey

 

[itsmeitspb]

All fillered up. Do I start the dreaded sanding or leave it as is and call it Winter Camo

 

[Worainu]

Hey all, I’m starting my Jorge helmet. I’ve had it for over 3 years and was put off with how rough it looked when it arrived. I have gave it a sand and now started filling. How do you all deal with rivits ect on the prints. There’s some on Jorges helmet near the visor but I don’t want to fill them in with filler. Any tips would be great!

A good way I've found to sand out those little details and bolts is by using dental/model scrapers. They are a cheap
godsend for those pesky sunken lines and bolts but take some care with them as you can easily slip and scratch unwanted spots. They can also be used to bevel sharp and inconsistent edges pretty well. Another way to do it is to cut them out of the model pre print using software and glue or fasten real hardware in their places during the finishing steps. That's how I did my custom helmet attachments and it looks pretty sick plus has the added bonus of being removable.