Vigilnt sniper
Jr Member
take your measurements, convert them to mm and replace them with the standard ones.
For example many of the parts are defaultly set to be at MC's size (expecialy all the MC armor) so take the size in MM and his height. divide the height of the armor by the height of MC and you have a number that you can then apply to your height. multiply you height by the number you got from dividing the height of armor by MC's height and you have the new number.
EX:
MC = 6'5" (not really just an example)
Helmet size = 300mm (not really. Take scale height from piece in pepakura)
300/95 (where 95 = height of MC in inches)
3.15789 = ratio of the scale item ( use this times your height to get the new scale)
3.15789 * 93 (where 93 = 6'3" my height)
new scale height = 293.68MM
For example many of the parts are defaultly set to be at MC's size (expecialy all the MC armor) so take the size in MM and his height. divide the height of the armor by the height of MC and you have a number that you can then apply to your height. multiply you height by the number you got from dividing the height of armor by MC's height and you have the new number.
EX:
MC = 6'5" (not really just an example)
Helmet size = 300mm (not really. Take scale height from piece in pepakura)
300/95 (where 95 = height of MC in inches)
3.15789 = ratio of the scale item ( use this times your height to get the new scale)
3.15789 * 93 (where 93 = 6'3" my height)
new scale height = 293.68MM