Hvmr-003 Prototype

[landotheninja]

Aww, sweet. This may be a little late, but I'm sorry about the gun. I hate people like that





and at the Noble VI helmet, I have always wanted to do that. Is there a push button for talking, or is it always transmitting? And is the other radio(s) in another helmet?

 

[odstsniper808]

Aww, sweet. This may be a little late, but I'm sorry about the gun. I hate people like that >





and at the Noble VI helmet, I have always wanted to do that. Is there a push button for talking, or is it always transmitting? And is the other radio(s) in another helmet?

It is both a push to talk and a switch where all you have to do is talk so its awsome. I think the only problem is that it has like a one and a half foot antena, but I could care less its a two way, and its in an awsome helmet so its awsome. Dont worry about it being late, infact I am the one who should be appologizing because I have not been on for the whole month, so yea.

 

[odstsniper808]

Alright got the pics so now it is time for an update.

Do not be side tracked by my muscular arms but do not refraim from calling me good looking. Back on topic uh, its comming out pretty good so far, I like the progress that i have made but I ah disapointed with the fact that I have only two months to finish it before I grad and start a more difficult life, damn ohwell had to grow up eventually. You can see my gound in the back with my honor roll tasels, I think white is really gay, all of my graduating class will be wearing white, when our school colors are black and blue. So anyways I sanded down the grip area, buttstock, and foward grip so hands can be placed there somewhat more comfort. So next...

This was the part I said was a little bit off, atleast I can hold it and I should be able to adjust it from their. As you can obviously see that I nailed it in, I think it looks like bolts or somethings so I am going to try and make use of them. Next...

I tried to make this piece a little more cilindrical so someones hand could grip it pretty easily. Plus some nails for some added detail. Moving on...

Basically the same as above, so let me know what you think and if you see anything that needs inprove ment.

 

[odstsniper808]

http://405th.com/forums/uploads/1271711685/gallery_19685_2038_648420.jpg

http://405th.com/forums/uploads/1271711685/gallery_19685_2038_2599843.jpg

Just a couple of picture that I took

 

[odstsniper808]

Geez, I feel so depressed....no one has even posted on my topic for a while. Well if no one is going to comment futher I am just going to stop posting updates until I just complete the thing then just show you guys one pic of it.

 

[AlexSpartan177]

Geez, I feel so depressed....no one has even posted on my topic for a while. Well if no one is going to comment futher I am just going to stop posting updates until I just complete the thing then just show you guys one pic of it.

If you feel depressed just go cut yourself!!! JK JK



it looks awesome man,





BTW

are planning to mold this?

 

[odstsniper808]

If you feel depressed just go cut yourself!!! JK JK



it looks awesome man,





BTW

are planning to mold this?

That idea is so crazy it just might work...LIKE HELL IT WILL!!! Anyways, I have no idea if I am, I will figure that out once I finish it, shouldnt be to long, all I have to really do is put both halfs together, sand the crappy parts, put foam armor pieces on, then paint. So in total maybe a week because I need to get more paint.

 

[mikeyelderscrll]

Very intricate! I like it.

 

[jake11124]

looks awesome. Also I would like to point out that the standard sniper is magnetically accelerated.

 

[odstsniper808]

Thanks, I am really glad that I am almost completely done with this project, cuz now I drew up a pistol to go along with it. Retarded right, I havent even finished my main gun and I am trying to start on the side arms. I will take a picture later today of the design and update this post later.

 

[odstsniper808]

Just a quicky, I have put the whole gun together and I am making a little head rest for it. I didnt want to take it home just to have to bring it back to make some adjustments. But tomorrow I will have pictures so everyone can see my progress. Hopefully you will enjoy it as much as i have, or maybe a little less....

 

[odstsniper808]

BWAHAHAHA!!! The weapon is almost complete!!

BRING IT ON COVENANT SCUM!!ODST FTW!!*no disrespect intended....much*

Alrighty then now all i have to do is put some armor and add-ons to this sucker and its good to go!

It has two-handed capabilities as well as single handed *not recommended*, with new and improved butt-stock and trigger grip!

I have made the trigger grip smaller then the last one so that it would be easier for me to grab the damn thing, I also put a cheek rest so incase someone wants to imagine there is a scope there they can rest their heads on something. You guys may not tell but I put spray on rubber-grip on the butt-stock to give it some texture and...well...grip.

As many will see there are some brown spots, that is not entirely my fault...I ran out of paint...because my brother put cammo on his airsoft gun...I cant upload videos from the camera to the computer, which sucks because my camera takes way better videos then pictures. So here is the best picture I could get from it...

I If I work on it during the weekend I should atleast have the side that got painted on armor done, but it might be some time before I get more black paint. It was a hassle just to get the one that I used and the chances of me getting another can is highly unlikely, with graduation coming up in just a week and a half most of the money is going else where, where it is going is beyond me. SO GIVE ME FEED BACK PEOPLE!!PLZ? I GIVE YOU COOKIE!!*wags tail!*

 

[Derf Xephon]

WOW that's awesome man. I've been watching this since it started and I know you had a lot of problems with people breaking it and re-designs but in spite of all that I think it came out great. I know it's not entirely finished at this point but just the shape of it is awesome, especially from the front looking down the barrel. It looks kinda big and my only concern is how heavy the thing is, cuz if you wanted to go to a convention with it or something it might be hard to lugg it around with you all day. Maybe a back strap could fix that so you could have your hands free too. If it's supposed to be a mini-mac gun or just an energy weapon, some led lights down the inside it might look cool as well. Either way though, great job man! Keep up the good work!

 

[odstsniper808]

WOW that's awesome man. I've been watching this since it started and I know you had a lot of problems with people breaking it and re-designs but in spite of all that I think it came out great. I know it's not entirely finished at this point but just the shape of it is awesome, especially from the front looking down the barrel. It looks kinda big and my only concern is how heavy the thing is, cuz if you wanted to go to a convention with it or something it might be hard to lugg it around with you all day. Maybe a back strap could fix that so you could have your hands free too. If it's supposed to be a mini-mac gun or just an energy weapon, some led lights down the inside it might look cool as well. Either way though, great job man! Keep up the good work!

Yes...what you say is true because it's..uh..butt heavy. So yea I was thinking about some sort of sling or something but it would have to be heavy duty, thanks for your opinion. I am not trying to use this as an excuse but I probably will not be putting LED lights at this time because my high school graduation coming up within a week so funds are being diverted to that, and college. But I have started to lay out how I will have the armor pieces placed on the gun, until I figure out a way to take a picture from the 3D modeler, give me time and I will eventually figure it out.

 

[Hecito08]

Yo your avatar made me want to tell you about my thread. CHECK IT!!!!
http://www.405th.com/showthread.php/30462-Halo-and-Furry-Combined

 

[Arioch]

Hey! Look everybody! Its the Crypt Keeper!