1st Build First Reach themed Build


Wicked Demon 15

New Member
Finished the second! As you can see there is a difference in sizing due to running out of filament. The first will be finished with bondo. I'm also digging the white, might be a main color for build?
 

Attachments

  • 20210803_164601.jpg
    20210803_164601.jpg
    1.6 MB · Views: 24

PlanetAlexander

Well-Known Member
I would actually suggest splitting the model to print the last little bit left, printing it out, gluing it on and blending it in with the rest. I haven't worked with Bondo but I've worked with other body fillers, and I think you'll have a hard time stacking enough of it up, then continiously refining its shape.
 

S225

Member
I would actually suggest splitting the model to print the last little bit left, printing it out, gluing it on and blending it in with the rest. I haven't worked with Bondo but I've worked with other body fillers, and I think you'll have a hard time stacking enough of it up, then continiously refining its shape.
I'd second this. That much bondo would be liable to break or just fall off. I had the same issue with one of my thigh prints and printing out the remaining portion worked very well. If it ends up being too much you can literally remove a layer at a time to get what you need.
 

Wicked Demon 15

New Member
I'd second this. That much bondo would be liable to break or just fall off. I had the same issue with one of my thigh prints and printing out the remaining portion worked very well. If it ends up being too much you can literally remove a layer at a time to get what you need.
I've followed your guys suggestion and it came out perfect! Thanks again.
 

Wicked Demon 15

New Member
Forearm one and right shoulder completed! Feels good to get this arm done in a week. Even after ordering more filament. All that's left is forearm 2, and wrists, then it's on to lower half. I'm going to look pretty yoked.
 

Attachments

  • 20210805_161807.jpg
    20210805_161807.jpg
    894.5 KB · Views: 32
  • 20210805_153639.jpg
    20210805_153639.jpg
    1.3 MB · Views: 32
  • 20210805_153616.jpg
    20210805_153616.jpg
    1.5 MB · Views: 32

Wicked Demon 15

New Member
I'm just gong to say this is way too big lol. I may reprint or just cut it down. More in the future once the thighsare done.
 

Attachments

  • 20210831_162533.jpg
    20210831_162533.jpg
    1.8 MB · Views: 9
  • 20210831_162232.jpg
    20210831_162232.jpg
    1.4 MB · Views: 12
  • 20210831_162153.jpg
    20210831_162153.jpg
    1.3 MB · Views: 11
  • 20210831_162143.jpg
    20210831_162143.jpg
    578.5 KB · Views: 11
  • 20210831_161426.jpg
    20210831_161426.jpg
    1.7 MB · Views: 10
  • 20210831_161412.jpg
    20210831_161412.jpg
    1.8 MB · Views: 10

TurboCharizard

Division PR, RXO and BCO
Division Staff
405th Regiment Officer
Member DIN
S068
I'm just gong to say this is way too big lol. I may reprint or just cut it down. More in the future once the thighsare done.
Keep those and compare with the torso, the Security shoulders are large in universe and based on the sizing of your bicep it looks pretty close.
 

Wicked Demon 15

New Member
Besides the forearms, the thighs might be one of my favorites that I've printed so far. Second one should be done by Thursday! And they pair well with the calves, I still have flexibility and can sit down.
 

Attachments

  • 20210906_153304.jpg
    20210906_153304.jpg
    1.8 MB · Views: 12
  • 20210906_153257.jpg
    20210906_153257.jpg
    1.8 MB · Views: 13
  • 20210906_153232.jpg
    20210906_153232.jpg
    1.5 MB · Views: 13

Wicked Demon 15

New Member
Just an update. The leg is finished, currently finishing up the waist then on to the boots and resized EOD. But I first need to recalibrate the voltage on the x,y motors due to them over heating. I was going to make a neck cover to add flair but that was a mess. I'm going to use a foam belt to hold the waist together and be the anchor for the legs. Going to start paint this week as well!
 

Attachments

  • 20210908_215027.jpg
    20210908_215027.jpg
    1.8 MB · Views: 16
  • 20210908_214621.jpg
    20210908_214621.jpg
    1.6 MB · Views: 17

Wicked Demon 15

New Member
Getting some painting done. I was inspired by halo infinite scorpion punch arm, so I decided to do that as well! And I've decided to go green instead of black for the base armor, might throw in white calves/ boots. Still a lot of prep to do and weathering. Had a scare with the chest coming a part in some spaces as it was drying. Fix them though.
 

Attachments

  • 20210916_151134.jpg
    20210916_151134.jpg
    1.8 MB · Views: 10
  • Snapchat-865703568.jpg
    Snapchat-865703568.jpg
    1.8 MB · Views: 10

Wicked Demon 15

New Member
So I might go back to the black/ gun metal look. I've seen other reference pics and I'm digging how much the red pops out next to the dark. What colors did you guys that went dark use? I got black spray paint but that's just too dark. I'm looking for color similar to the game and this artwork.
 

Attachments

  • FB_IMG_1632050133870.jpg
    FB_IMG_1632050133870.jpg
    80.1 KB · Views: 6

Your message may be considered spam for the following reasons:

  1. Your new thread title is very short, and likely is unhelpful.
  2. Your reply is very short and likely does not add anything to the thread.
  3. Your reply is very long and likely does not add anything to the thread.
  4. It is very likely that it does not need any further discussion and thus bumping it serves no purpose.
  5. Your message is mostly quotes or spoilers.
  6. Your reply has occurred very quickly after a previous reply and likely does not add anything to the thread.
  7. This thread is locked.
Top