Kingdom Hearts - Terra's Ends Of The Earth Keyblade- 3D print build

[shadowbreakre]

One of my next cosplays is Terra's armor from kingdom hearts. instead of 3D printing it like I normally do I'll be going the foam route as I don't feel the pieces are big or detailed enough to warrant printing. That said however I have Modeled and will be printing his Ends of the Earth Keyblade. which you can get below.

Kingdom Hearts - Ends Of The Earth Keyblade by leonbreakre

3D printable Terra's Keyblade from Birth By Sleep, modeled after the orignial cinamatic trailer. Center Hole runs through all pieces to run a PVC pipe or shaft. Includes an optional connector piece if you would rather use that. Includes a 2 versions of the charm, a full one and one with a...

www.thingiverse.com

I based it off the original Cinematic trailer rather than the in-game design and added the keychain. Holes run through all paces so that you can uses a PVC pip or other preferred shaft straight through. I included optional printable connectors. I made 2 versions of the charm, one whole and another with a removeable gem incase you want to print it with a translucent material or resin. I'll be working on this periodically between my spartan armors. I also plan of making other keyblades so if there are any you guys would like to see let me know.

 

[Benton188]

I never played the Kingdom Hearts series, but I will say that some of their sword designs have always looked cool. Beautifully modeled sir.

 

[shadowbreakre]

Printed the guard to my keyblade and I thought I underestimated the size before, it’s supposed to be big but I wasn’t expecting THAT big. Dnd mini for scale.

Compared the the cheap foam one I got off Amazon

After really looking at it, this would also make a cool hilt for an energy sword. I think I might have just come up with an idea for a crossover cosplay.

 

[shadowbreakre]

Update 2/06/2021:
-Added simple chain links! just print as many as you need and glue the halves together.
-Fixed holes in the Grip.obj, were previously a smidge to small for the connectors.

Had just enough filament to finish the guard and handle. Unfortunately I’m out now and broke AF. Going to be at least a month before I can continue working on this. Now accepting donations for the poor ~kidding(maybe)

 

[shadowbreakre]

After some long serious thought I have decided to rebrand as breakerbox cosplay and launched my very own patreon. All my models will still be free, however If you like what I do and want to support me in doing what I love you can donate here. https://www.patreon.com/Breakerbox

 

[3DVagabond]

This is going to be a VERY interesting build! But where are you getting your filament where its putting your bank account into a wrestling submission hold?

 

[shadowbreakre]

This is going to be a VERY interesting build! But where are you getting your filament where its putting your bank account into a wrestling submission hold?

It's not the filament putting me in a hold, its the cost of staying alive that has me so far down the hole that I cant even afford filament

 

[3DVagabond]

I believe you. I've experienced it before. But say if you did have the means, where do you normally get it from?

 

[shadowbreakre]

I believe you. I've experienced it before. But say if you did have the means, where do you normally get it from?

Amazon mostly. There are a few different brands on there I like, I spend about $25 a wheel.

 

[TurboCharizard]

Amazon mostly. There are a few different brands on there I like, I spend about $25 a wheel.

Angus314 and Rock Lobbster we need to spread the word of Sunlu SPLA big bundle orders! $25 US is crazy expensive for filament.

 

[Rock Lobbster]

Angus314 and Rock Lobbster we need to spread the word of Sunlu SPLA big bundle orders! $25 US is crazy expensive for filament.

it's no longer on the super sale so it's not as worth it

 

[Angus314]

Hopefully it goes back on sale next winter but yeah.