Kotor 1 And 2 Droids

Discussion in 'Halo Pepakura Costumes' started by Nintendude, Feb 18, 2010.

Thread Status:
Not open for further replies.
  1. Nintendude

    Nintendude Well-Known Member

    Trophy Points:
    970
    After 2 months of working on these I am finally ready to release the droids from Knights Of the Old Republic 1 and 2 for anyone on here with Pepakura Designer to unfold. The Droids that I have in the ZIP folder below the droids that are in the folder are : HK-47, HK-48, HK-49, HK-50, HK-51, T3-M3, T3-M4, Assassin Droid, G.O.T.O, Mining Droid, Protocol Droid, and War Droid. I hope every one enjoys. The first link is the Droid pack and the second link is a direct link to all of my 3D models I have collected if there is anything else that I have in my 4shared you are welcome to unfold it.



    Droid Pack

    http://www.4shared.com/file/224860538/c57c52f/KOTOR_1_And_2_Droids.html



    My 4Shared 3D Model Collection

    http://www.4shared.com/dir/20265013/b717d38e/3D_Files.html
     
  2. Boba Fett

    Boba Fett Well-Known Member

    Trophy Points:
    769
    Dibs on HK-47! He is AWESOME! I'm wondering, is it possible to get models of the KotOR guns? Or are thyey too low definitio?
     
  3. MikyVengeance

    MikyVengeance Well-Known Member

    Trophy Points:
    770
    dayum!

    very nice! :)
     
  4. Nintendude

    Nintendude Well-Known Member

    Trophy Points:
    970
    If you mean the droid blaster I have it as for other KOTOR weapons still working on it. On those files you have to apply the textures yourself they are included for each of the models in the same folder but you have to apply the texture yourself.
     
  5. Boba Fett

    Boba Fett Well-Known Member

    Trophy Points:
    769
    and waddyknow! I was gonna ask how to apply the texture... And 1 more question, on these ripped models, will I be able to convert them into a different format, and rework them in Blender? Like if I wanted to add more detail or something.
     
  6. unheared

    unheared Member

    Trophy Points:
    119
    thank you
     
  7. Nintendude

    Nintendude Well-Known Member

    Trophy Points:
    970
    I'm not sure about importing them into Blender. I can only change the .OBJ to .VFM,.ENT or .MAP. When you first open these models in Designer make sure you click No Flip then click the yellow button and click on finish to rotate the model into a standing position. To do the texture click on Settings, Texture settings then select the texture that is in the folder for the file you have open.
     
  8. Boba Fett

    Boba Fett Well-Known Member

    Trophy Points:
    769
    Ah ha... Thanks for that. woo hoo! This is gonna be fun... But my parents are gonna think I'm totally psychotic...
     
  9. Nintendude

    Nintendude Well-Known Member

    Trophy Points:
    970
    I've already been told I'm psychotic the only diffrence is I have paperwork that proves it, LOL.
     
  10. cayoke

    cayoke Well-Known Member

    Trophy Points:
    670
    Now we need some one to scale it!
     
  11. Nintendude

    Nintendude Well-Known Member

    Trophy Points:
    970
    Someone else will have to play with the scaling and unfolding parts I just had fun enough ripping these guys.
     
  12. bevbor

    bevbor Well-Known Member

    Trophy Points:
    770
    Wow, great!



    There's a lot of work to make models pep-friendly =(



    I already started :)



    Lucas will kill us :)
     
  13. Nintendude

    Nintendude Well-Known Member

    Trophy Points:
    970
    Lucas and ILM, All I got to say is it's free to the public and I'm not trying to sell any of it so all I can tell them is bring it on. Thanks for working on the models bevbor.
     
  14. xxn00berxx

    xxn00berxx Member

    Trophy Points:
    119
    would be awesome to make!
     
  15. nevets

    nevets New Member

    Trophy Points:
    2
    as long as yyou don't try to sell the models you should be fine im a r2 builder and were allowed to build the droids
     
  16. Nintendude

    Nintendude Well-Known Member

    Trophy Points:
    970
    Which BTW I'll hopefully have the R2 Droids done later this week and I will add them to the original file, you will know when I do it b/c I will change whats listed in the pack.
     
  17. bevbor

    bevbor Well-Known Member

    Trophy Points:
    770
    Well, so far War Droid pep friendly model in .obj and .pdo is ready :)



    (press on picture to enlarge)



    4370568560_f9f94ac164.jpg



    Zip file with PDO and OBJ inside is there :)
     
  18. Nintendude

    Nintendude Well-Known Member

    Trophy Points:
    970
    After looking at the War Droid I can see someone trying to turn it into a costume.
     
  19. Boba Fett

    Boba Fett Well-Known Member

    Trophy Points:
    769
    I'm unfolding T3-M4... Go to wookiepedia. They have the heights in meters. Example, HK-47 (and I assume all other HK models) are 1.8 meters, or 1,800 mm high. Thanks again nintendude! And yeah, Some of these droids could be made costumes... especially the war droid as you said.
     
  20. Nintendude

    Nintendude Well-Known Member

    Trophy Points:
    970
    Yes the other HK's are the same in height the only real diffrence is they have a change in colors. Thanks for letting us know which droid you are working on so that someone else does'nt start working on the same one. The GOTO droid is probably going to be the easiest to pep and make.
     
    Last edited by a moderator: Jul 26, 2017
  21. Boba Fett

    Boba Fett Well-Known Member

    Trophy Points:
    769
    also been looking at him... I won;t do it at the moment, but maybe in the future... I'll also give HK-47 a try. Looking at these models, with the large areas, it might be better to use the parts as blueprints for making them in cardboard. I'm thinking I might make a T3-M4, and Hk-47... would give me motivation to make a Revan costume. Too many projects, too little time... that's the story of my life.
     
  22. Nintendude

    Nintendude Well-Known Member

    Trophy Points:
    970
  23. bevbor

    bevbor Well-Known Member

    Trophy Points:
    770
    Well, T3M4 converted to pep-friendly model too :)



    (press on picture to enlarge)



    4369955933_00b597dbbe.jpg





    Zip file with OBJ and PDO is there
     
  24. Boba Fett

    Boba Fett Well-Known Member

    Trophy Points:
    769
    Yay! 1st download! Awesome! I cal dibs on unfolding D-viddy's saber... These are so easy to do though... Thanks again!
     
  25. Nintendude

    Nintendude Well-Known Member

    Trophy Points:
    970
    Bevbor I have a R2-D2 model but there is a problem with it when I ripped it I got the model and textures, the textures are fine on the main part of the body but they are all screwed up on the legs ,do you think you can fix it?
     
Thread Status:
Not open for further replies.

Share This Page