my 3d printing of halo infinite armor

Status
Not open for further replies.

marinesniper

Sr Member
Member DIN
S118
ok guys my wife bought me a 3d printer, i have been printing and learning to print. i will give you guys who do 3d printing props man it seem simple but man it can give you a heck of a head ache. but i think i have the printer figured out the clear and tpu stuff im still trying to figure out. but i have printed my infinite helmet out and some other armor parts. i still have sanding to do but i figured i would share what i have done so far the files i got from do3d.com I figure what the heck this is the only way to learn and i know these files are not 100% accurate but it will work till later when i can get hold of 100 % accurate files but i think they were worth the money.
 

Attachments

  • 20200503_223145.jpg
    20200503_223145.jpg
    1.6 MB · Views: 491
  • 20200504_145847.jpg
    20200504_145847.jpg
    1.4 MB · Views: 509
  • 20200516_095427.jpg
    20200516_095427.jpg
    1.4 MB · Views: 501
  • 20200517_101922.jpg
    20200517_101922.jpg
    1.3 MB · Views: 452
  • 20200517_102014.jpg
    20200517_102014.jpg
    1.4 MB · Views: 444
ok guys my wife bought me a 3d printer, i have been printing and learning to print. i will give you guys who do 3d printing props man it seem simple but man it can give you a heck of a head ache. but i think i have the printer figured out the clear and tpu stuff im still trying to figure out. but i have printed my infinite helmet out and some other armor parts. i still have sanding to do but i figured i would share what i have done so far the files i got from do3d.com I figure what the heck this is the only way to learn and i know these files are not 100% accurate but it will work till later when i can get hold of 100 % accurate files but i think they were worth the money.
Looking great so far! Accuracy can be overrated, as long as you are having fun with it, that is all the really matters! Good luck and looking forward to future updates!
 
ok guys my wife bought me a 3d printer, i have been printing and learning to print. i will give you guys who do 3d printing props man it seem simple but man it can give you a heck of a head ache. but i think i have the printer figured out the clear and tpu stuff im still trying to figure out. but i have printed my infinite helmet out and some other armor parts. i still have sanding to do but i figured i would share what i have done so far the files i got from do3d.com I figure what the heck this is the only way to learn and i know these files are not 100% accurate but it will work till later when i can get hold of 100 % accurate files but i think they were worth the money.

Were the gloves part of the Do3D file as well? Hard to tell, but they look like it was mold and cast.
 
What printer do you have? I found that I could push the boundaries of my printer and save some plastic by reducing my support overhang to 75 degrees
i have a geeetech 20 i really like it it prints so smooth.. yeah i have mine set @ 70 i will try 75
 
Were the gloves part of the Do3D file as well? Hard to tell, but they look like it was mold and cast.
no the glove are some i found at lowes if you want i can look on the tag to see what the brand is but i though they looked close to the chief. and some of the file i got from them i eneded up fixing because they were the wrong glove cover.
 
ok guys and gals here are a couple of photos of what i have so far.. the front of the chest the left shoulder and bicep , forearm let me know what you guys think.... i know it looks funny but with nothing holding it up its hard to model it lol
 

Attachments

  • 20200525_101731.jpg
    20200525_101731.jpg
    363.7 KB · Views: 390
  • 20200525_101738.jpg
    20200525_101738.jpg
    358.6 KB · Views: 394
ok guys and gals here are a couple of photos of what i have so far.. the front of the chest the left shoulder and bicep , forearm let me know what you guys think.... i know it looks funny but with nothing holding it up its hard to model it lol

Looks great! What material are you using to print it?
 
ok here we go if some one here in the us can tell me what im printing i will send you a set you will just have to sand and finish them.ok you have 24 hrs to comment i only have one set extra so only one can win!! send me a pm with your answer first one correct wins.
 

Attachments

  • 20200531_080710.jpg
    20200531_080710.jpg
    1.8 MB · Views: 275
ok here we go if some one here in the us can tell me what im printing i will send you a set you will just have to sand and finish them.ok you have 24 hrs to comment i only have one set extra so only one can win!! send me a pm with your answer first one correct wins.
For some reason I'm not able to PM you but I'm guessing that its either the hand or foot pieces!
 
Yes I am!

you won them where do you want me to ship them to buddy just send me a address i will be sending them usps and i will send you the tracking number .... i had a guess of it was part of the helmet wow really that was to funny......

PS if you want to smooth these out with out doing a lot of sanding you can coat them with resin two thin coats and then paint them.
 
ok here is the neck seal i printed i know it looks like a neck brace but it is just to show how it fits. i am going to make a mold of it and make the seal out of probly silicone. anyone got any ideas on any other no break the bank materials
 

Attachments

  • 20200605_090450.jpg
    20200605_090450.jpg
    365.2 KB · Views: 276
  • 20200605_090508.jpg
    20200605_090508.jpg
    395.9 KB · Views: 243
  • 20200605_100018.jpg
    20200605_100018.jpg
    255.5 KB · Views: 312
  • 20200605_100052.jpg
    20200605_100052.jpg
    246.5 KB · Views: 295
Status
Not open for further replies.
Back
Top