marinesniper
Sr Member
- Member DIN
- S118
i think you have a awesome set up there i love the way those interlock make lining up easier. im really stoked about this build keep the updates comming....
1st Build My custom 3D printed halo reach armor build journey (So Far)
- Thread starter tvanhelene
- Start date
- Status
Billbill36
New Member
I just saw your update to Moe's EOD. That's awesome! I had been planning on using that to go with my in-game Spartan but the missing details were a bit too much of an issue for me. Once I finish the rest of my suit I might need to give it a print.
The build is looking amazing and I can't wait to see the final suit up, good job man!
The build is looking amazing and I can't wait to see the final suit up, good job man!
tvanhelene
Member
Im really glad someone else will be able to use the details I added!
tvanhelene
Member
Both shoulders printed! Im a fan of both of them, We'll see if I like the look of both at the same time on me later. Im running out of things to print! Currently printing the belt and trying to figure out the size for my abdomen piece. I need to start working on a harness for all of this stuff, or some way of keeping the pieces of armor actually attached to my body.
marinesniper
Sr Member
- Member DIN
- S118
they look awesome i never thought about mixing up the shoulders like that i like the way it looks...
cursedzeba
New Member
Did the missing files on CG trader happen to be the chest components with hallowed areas for electronics? I have had the same issue
tvanhelene
Member
Yep. In the main set that’s supposed to contain everything it doesn’t have the versions for the holes for the electronics. When I discovered this I just got a refund. However, the security shoulder post also is missing the shoulders, so when I bought that I also had to get a refund. All the other posts look fine though.
cursedzeba
New Member
Were you not able to message them to get the files sent to you?
tvanhelene
Member
Nope, the guy wouldn’t respond to any of my messages. I don’t think he’s active anymore.
cursedzeba
New Member
Well damn, I will message the support and get a refund myself, I will just have to carve out a hallow for electronics myself
tvanhelene
Member
I already did that, I can share my modified files with you if you want. I made holes for the LEDs
cursedzeba
New Member
That would be great. Thank you
RogueOneSpartan
Member
Wow, I love your work!
What technique do you use for glueing parts of the armor together, for smoothing and priming your parts?
What technique do you use for glueing parts of the armor together, for smoothing and priming your parts?
tvanhelene
Member
Thanks! for gluing parts together, i use a 2 part epoxy resin. When I start sanding parts for this, I will go through cycles of adding bondo or filler primer, then sanding it down, then adding more filler primer or bondo until I am satisfied with the results. I am usually only satisfied with a near perfect finish with no print imperfections or layer lines, so this takes a while. Im sure I will go into greater detail about my finishing process when I am at that stage for the suit.
tvanhelene
Member
marinesniper
Sr Member
- Member DIN
- S118
that is going to give it such a beefy look and it looks great print wise. nice job love these updates...
tvanhelene
Member
Update time! I've been super busy with midterms recently but have been trying to think of how I'm going to do the undersuit. I want to avoid what a lot of other builds have done, which is just to have black cloth showing as the undersuit. Im working on printing out a flexible abdomen piece out of TPU. Heres a vid of It flexing:
I want to do this for as many of the undersuit parts as possible, like neck gasket, under the chestplate/shoulder gasket, shorts area.
Im currently printing out the last large section of the abdomen (the part that's obviously missing here).
Also, I got my cr-6 se that I backed on kickstarter like 5 months ago finally! Prints like a dream so far! Now I have 3 3d printers, which is far too many now that I am almost done printing everything for the suit. HMU if you're interested in a heavily modded ender 3 I guess lol.
I want to do this for as many of the undersuit parts as possible, like neck gasket, under the chestplate/shoulder gasket, shorts area.
Im currently printing out the last large section of the abdomen (the part that's obviously missing here).
Also, I got my cr-6 se that I backed on kickstarter like 5 months ago finally! Prints like a dream so far! Now I have 3 3d printers, which is far too many now that I am almost done printing everything for the suit. HMU if you're interested in a heavily modded ender 3 I guess lol.
tvanhelene
Member
Did some work today,
I finished printing out the last big piece of the flexible tpu abdomen,
Also started work on my armor stand! I bought all the materials I will need, mostly PVC tubing, and made a duck tape dummy of my body to act as the shell over the frame.
I finished printing out the last big piece of the flexible tpu abdomen,
Also started work on my armor stand! I bought all the materials I will need, mostly PVC tubing, and made a duck tape dummy of my body to act as the shell over the frame.
tvanhelene
Member
Good progress on the armor stand!
Frame made out of PVC, With the shell made out of a duck tape dummy of myself. I need to figure out some way to stuff it in order to fill him out.
Frame made out of PVC, With the shell made out of a duck tape dummy of myself. I need to figure out some way to stuff it in order to fill him out.
- Status
Similar threads
1st Build
First armor build
