Reach Spartan+SRS99AM Rifle Build

[EternalSentinel]

All good! Its not full undersuit. Its multiple pieces filling the empty space between armor parts so heat won't be as much of an issue.

Torso piece that sits inside the hard torso
Elbow sleeves and knee sleeves
Inner thighs
And then a lower abdomen front and back with crotch and butt

 

[Nimitz]

Makes sense, I'm doing similar things

just sewn

 

[EternalSentinel]

So not much of an update but yeh... all molds besides the torso (front/back/left/right) and ab/lower (front and back) are printed and can be cast from.


The ones that aren't done were partially printed but its only causing issues. Split them in Bambu.... used the peg system which lead to alot of alignment issues. Had to scrap them.

So now there's options...

Cast and Sell some of the necks, elbows, knees and shoulders...
Buy a bigger printer.
Reprint without the peg system which should help with alignment ironically.

But I have reached the point where I have wasted too much money on the project to stop but also to continue.

 

[EternalSentinel]

Stuffs fcked.

Project might get sold. Might be continued at a later point. Wasted 2.2k.

Tried to get the urethane to work but it just wouldn't. Got the molds figured out now. So I will continue making the molds but beyond that I have lost the motivation for the project.

 

[EternalSentinel]

Lots of setbacks on this project

First the traditional molds failing then we had the urethane crisis.

Switching to Dragonskin. No idea when the undersuit will be done but I found setting myself a deadline for personal projects leads to frustrations.

Pretty much all but the back mold are printed. I need to finish filling the seams and then sand them flush. Then bedliner.

If I ever make molds like this again, I am buying a bigger printer.

The sniper won't get made for a while and has been sold. (Especially cause the cons I plan to attend with the Spartan are a little iffy on props)


As always, commissions are open and once i perfect the molds the undersuits will be available in limited numbers (also individual parts like the neck)
Mold files by Instinctcreative

 

[EternalSentinel]

Okayt longer time no update
Lots going on but we made progress.
Most everything is lined and ready to go.
Just need to spray the front and sand/spray the back now.

I plan to have the first pull done over the holidays

 

[EternalSentinel]

Some starting struggles with the neck and elbows but they are done minus trimming.

 

[EternalSentinel]

And here's some worn pictures. Seam needs some minor additional cleanup but its okay for a first trim. Its also less noticeable from further away and with extra armor on.

Additionally some bunching on the elbow as its tight squeezing it into the bicep. Will trim the sleeves and attach them to the edge of the bicep instead.

 

[EternalSentinel]

Files for the molds from Instinctcreative

 

[EternalSentinel]

Update dump.
Undersuit is complete. Has been trimmed and standalone strapping added.
Taking pictures on the weekend of the worn suit, then add all the attachments and strapping to the armor


The parts and the full undersuit are available for sale. Any issues with my pull are being fixed for the production models. Mainly the chest back ran into some texture issues.

 

[EternalSentinel]

Reach Spartan Undersuit completed

I regard this as a test suit. The final product has all the little issues fixed that this suit highlighted.

Some of the fitment issues are mainly due to the knees sliding when not attached to the thighs.
And one of the shoulders slid down a little

The chest doesn't hold its form all that well on my suit since its going to be glued into the hard chest but the production suit uses more material to add stiffness.

The leg holes on the abs are bigger than they need to be for me and are part of the one size fits most measures.

Parts and full suits are now available.

Pricing:
Neckseal — €90
Elbows (pair) — €140
Knees (pair) — €320
Shoulders (pair) — €220
Abs + Back — €420
Chest — €360

Bundles:
Arms Pack (Shoulders + Elbows) — €330
Lower Body Pack (Knees + Abs/Back) — €700
Core Pack (Chest + Abs/Back) — €740
Abs + Back + Knees + Elbows — €820

Full Flexible Undersuit (no thighs): €1,450
(Early supporter pricing available)

Shipping & fees not included — DM for details.
Payment plans for bundles and full suits available.

Want your own? Message us!